Polymer Property : Tensile Strength, Yield = 11.8 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	11.8 MPa	1710 psi	ASTM D412
Polymax® Maxelast® P3790 TPE, PP Overmold or Standalone use Polymax's TPE material complies with UL, VDE, FDA, RoHS and PAH's standards.Uses:Consumer ProductsToys & NoveltiesAuto PartsTool Hand GripsSporting GoodsWire & Cable ElectronicsMedical DevicesPlasti..
Tensile Strength, Yield	11.8 MPa	1710 psi	ASTM D412
Precision Polymer Engineering V97D Fluoroelastomer Compound Fluoroelastomer Rubber, 92-98 °IRHD. Terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene. Tested at the Shell Thornton Research Centre, where it has shown excellent res..
Tensile Strength, Yield	11.8 MPa	1710 psi	ASTM D638
ExxonMobil LL 6202 Injection Molding Resin (discontinued **) LL 6202 is a narrow molecular weight butene copolymer designed for applications that require excellent toughness. This resin offers easy processability for applications that require outstanding tear..
Tensile Strength, Yield	11.8 MPa	1710 psi	ASTM D638
Lotte Chemical Titan TITANEX® LI2516 Linear low density polyethylene resin (discontinued **) LI2516 is a pelleted linear low density polyethylene with very narrow molecular weight distribution.Applications: House-wares, lids, closures and toys.Advantages: Excellent stress crack resistance,..
Tensile Strength, Yield	11.8 MPa	1710 psi	ASTM D638
Lotte Chemical Titan TITANLENEÂ® LDI300YY Low density polyethylene resin LDI300YY is a low density polyethylene resin for injection molding and is a barefoot grade. LDI300YY meets the U.S. Food and Drug Administration (FDA) criteria for food contact use as specified in 2..
Tensile Strength, Yield	11.8 MPa	1710 psi	9.8 in/min; ASTM D638
Teknor Apex Sinvicomp SFW 8000 Polyvinyl Chloride, Flexible Availability: Asia Pacific Uses: Footwear; General Purpose Forms: Pellets Processing Method: Injection MoldingInformation Provided by Teknor Apex
Tensile Strength, Yield	11.8 MPa	1710 psi	BP 13B/1
SIDPEC EGYPTENEÂ® LL 2406 AA LLDPE Pipe Grade Applications:Drip irrigation pipeSmall potable water pipeInformation provided by Interchim s.r.l., official distributor of Sidi Kerir Petrochemicals Co. (SIDPEC) Products
Tensile Strength, Yield	11.8 MPa	1710 psi	9.8 in/min; ASTM D638
Teknor Apex Sinvicomp SFC 8500 Polyvinyl Chloride, Flexible Availability: Asia Pacific Features: Foamable Uses: Footwear Forms: Pellets Processing Method: Injection MoldingInformation Provided by Teknor Apex
Tensile Strength, Yield	11.8 MPa	1710 psi	9.8 in/min; ASTM D638
Teknor Apex Sinvicomp SFN 8510 Polyvinyl Chloride, Flexible Availability: Asia Pacific Features: Oil Resistant Uses: Footwear Forms: Pellets Processing Method: Injection MoldingInformation Provided by Teknor Apex
Tensile Strength, Yield	11.8 MPa	1710 psi	at 300% elongation; ASTM D412
Lubrizol Estane® S185A Thermoplastic Polyurethane Type: Estane® S185A is a Shore 87A, polyester based thermoplastic polyurethane (TPU). FDA approved (21 CFR 177.2600, 177.1680).Uses: Injection Molding, Extrusion.Availability: AsiaInformation Prov..
Tensile Strength, Yield	11.8 MPa	1710 psi	at 100% elongation; ASTM D412
Lubrizol Estane® X-595A-3FR Thermoplastic Polyurethane Type: Estane® X595A-3FR TPU is a Shore 94A, polyester type thermoplastic polyurethane elastomer.Uses: Film Blowing, Extrusion.Available in AsiaInformation Provided by The Lubrizol Corporation
Tensile Strength, Yield	11.8 MPa	1710 psi
Dow DOWLEX™ IP-2580 Linear Low Density Polyethylene Next Generation DOWLEX® IP-2580 resin is an improved processing linear low density polyethylene resin designed for excellent flow and stiffness with freezer grade impact properties. DOWLEX IP-2580 ..