Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 32.1 MPa | 4660 psi | ASTM D412 |
Precision Polymer Engineering Z95X Hydrogenated NBR Compound Peroxide cured, Hydrogenated Nitrile Rubber, 85-95 °IRHD. Medium acrylonitrile content (ACN = 36%). ASTM designation = HNBR.Applications: Gas blister resistant compound designed for use in applica.. |
|||
Tensile Strength, Yield | 32.1 MPa | 4650 psi | 2 in/min; ASTM D638 |
Phillips 66 COPYLENE® CR027 Polypropylene, Homopolymer, Mini-random, BOPP Mini-random homopolymer. Applications: BOPP film. Equivalent to Pro-fax® HL456JInformation provided by Phillips 66. |
|||
Tensile Strength, Yield | 32.1 MPa | 4650 psi | ASTM D882 |
Formosa Plastics Formolene® LH6008 Injection Molding HDPE
(discontinued **) HomopolymerApplications: Totes, cases, crates, over-caps, toysFormolene LH6008 is a high density polyethylene for injection molding applications.Meets all requirements of the U.S. Food and Drug Admi.. |
|||
Tensile Strength, Yield | 32.1 MPa | 4650 psi | ASTM D882 |
Formosa Plastics Formolene® LH6008U Injection Molding HDPE
(discontinued **) HomopolymerApplications: Totes, cases, crates, over-caps, toysFormolene LH6008U is a high density polyethylene for injection molding applications with UV stabilizer.Meets all requirements of the U.S.. |
|||
Tensile Strength, Yield | 32.1 MPa | 4650 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 75 PHR N339 Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 32.1 MPa | 4650 psi | 2 in/min; ASTM D638 |
Phillips 66 COPYLENE® CH042L Polypropylene, Homopolymer, Straw and Extrusion, Antistat COPYLENE™ CH042L is specifically designed for application in extrusion applications such as straws. Applications: Straws.Information provided by Phillips 66. |
|||
Tensile Strength, Yield | 32.1 MPa @Temperature 23.0 °C |
4660 psi @Temperature 73.4 °F |
ASTM D638 |
Ineos H36G-01 Polypropylene Homopolymer This is a polypropylene homopolymer for general purpose injection molding and high speed fiber spinning applications. It is useful for spunbonded nonwovens and partially oriented yarn (POY). This .. |
|||
Tensile Strength, Yield | 32.1 MPa | 4650 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 75 PHR N339 Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 32.1 MPa | 4660 psi | 77% Ret. |
UBE UBESTA® 3030U Nylon 12 (After Acetic Acid (10%) for 500 hours) Description: UBESTA has a strong resistance to chemicals. Under normal conditions, it is not significantly affected by alkalis, alcohols, ethers, ketones, hydrocarbons, lubricating oils, gasoline, c.. |
|||
Tensile Strength, Yield | 32.1 MPa | 4650 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 75 PHR N220 Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 32.1 MPa | 4650 psi | 2" per min, Type IV; ASTM D638 |
Amco PRIMATOP HDPE 080960 Injection Molding Polyethylene HDPE 080960 features high stiffness, maximum toughness, good top loading capability, and high surface gloss. Applications include tote boxes and beverage crates.Former A-Top Polymers product; part o.. |
|||
Tensile Strength, Yield | 32.1 MPa | 4650 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 75 PHR N220 Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 32.1 MPa | 4650 psi | 50 mm/min; ASTM D638 |
Amco PRIMATOP PP CO 350-10 RC Clarified Random Copolymer Features:excellent processingimpactclarityanti-statApplications:rigid packaginghousewaresFormer A-Top Polymers product; part of Amco product line since 2013. |