Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 386 MPa | 56000 psi | |
Materion BrushBronze® 95510 (AMS 4880) Continuous Cast 4.0" - 17.0" Information supplied by Brush Wellman Engineered Materials.BrushBronze™ 95510 is an Aluminum-Nickel-Bronze alloy that combines high strength, ductility, and good abrasion resistance under sever.. |
|||
Tensile Strength, Yield | 386 MPa @Diameter 12.7 mm |
56000 psi @Diameter 0.500 in |
|
Kaiser 6033 T8 Rod & Bar Alloy 6033 is a higher strength version of alloy 6061, approaching properties typically obtainable with 2000 series alloys. The alloy was developed to also offer improved machinability over 6061. Th.. |
|||
Tensile Strength, Yield | 386 MPa @Strain 0.200 % |
56000 psi @Strain 0.200 % |
|
Haynes Hastelloy® C-22® alloy, transverse, GMAW spray weldment, 23.4 mm thick plate HASTELLOY® C-22® alloy is a nickel-chromium-molybdenum-tungsten alloy with excellent overall corrosion resistance compared to other Ni-Cr-Mo alloys, including HASTELLOY C-276 and C-4 alloys an.. |
|||
Tensile Strength, Yield | >= 386 MPa | >= 56000 psi | |
Alcoa Excalibar® 6013-T8 Aluminum, 1.9-3.8 cm diameter Weldability = A; Stress Corrosion Cracking Resistance = A; General Corrosion Resistance = B (A = best; E = worst). General 6013 characteristics and uses: High strength and good corrosion resistance... |
|||
Tensile Strength, Yield | 386 MPa | 56000 psi | |
EDRO #45 Free Machining Carbon Steel EDRO #45™ is a medium carbon steel stocked in as rolled condition. EDRO #45™ is characterized by: excellent machinability, responds to surface hardening, may be welded, and good dimensional stabil.. |
|||
Tensile Strength, Yield | 386 MPa @Diameter <=15.9 mm |
56000 psi @Diameter <=0.625 in |
Rod |
CMW® 28 Copper Alloy CMW® 28 material is a copper base alloy having very high electrical and thermal conductivity and medium strength and toughness. It is a heat treatable alloy and develops its strength and hardness t.. |
|||
Tensile Strength, Yield | 386 MPa @Strain 0.200 % |
56000 psi @Strain 0.200 % |
|
AK Steel 18 SR® Ferritic Stainless steel AK Steel 18 SR® provides excellent resistance to high temperature scaling - far superior to that of Type 446 stainless steel. This material is readily welded by conventional methods. It is not su.. |
|||
Tensile Strength, Yield | 386 MPa @Temperature 260 °C |
56000 psi @Temperature 500 °F |
|
ATI Allegheny Ludlum AL 2003™ Duplex Stainless Steel Characteristics: superior stress corrosion cracking resistance to Types 316 and 317, yield strength double that of conventional austenitic stainless steel, good corrosion resistance, good chloride s.. |
|||
Tensile Strength, Yield | 386 MPa @Temperature 204 °C |
56000 psi @Temperature 399 °F |
|
ATI Allegheny Ludlum AL 2003™ Duplex Stainless Steel Characteristics: superior stress corrosion cracking resistance to Types 316 and 317, yield strength double that of conventional austenitic stainless steel, good corrosion resistance, good chloride s.. |
|||
Tensile Strength, Yield | 386 MPa @Strain 0.200 %, Temperature 400 °C |
56000 psi @Strain 0.200 %, Temperature 752 °F |
|
Haynes Hastelloy® C-22® alloy, all-weld metal, SMAW HASTELLOY® C-22® alloy is a nickel-chromium-molybdenum-tungsten alloy with excellent overall corrosion resistance compared to other Ni-Cr-Mo alloys, including HASTELLOY C-276 and C-4 alloys and al.. |
|||
Tensile Strength, Yield | 386 MPa @Strain 0.200 % |
56000 psi @Strain 0.200 % |
|
Haynes Hastelloy® C-22® alloy, transverse, SMAW weldment, 19.1 mm thick plate HASTELLOY® C-22® alloy is a nickel-chromium-molybdenum-tungsten alloy with excellent overall corrosion resistance compared to other Ni-Cr-Mo alloys, including HASTELLOY C-276 and C-4 alloys and al.. |