Polymer Property : Tensile Strength, Ultimate = 1380 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	9.50 MPa	1380 psi	ASTM D638
ExxonMobil Escorene® LD-421 LDPE Power Cable Insulation (discontinued **) Data provided by the manufacturer, Exxon Chemical.A crosslinkable polyethylene homopolymer designed as an electrical grade base resin.Applications: A base resin for fully formulated crosslinkable me..
Tensile Strength, Ultimate	9.50 MPa	1380 psi	500 mm/min (20 in./min.); ASTM D638, Type IV Specimen
Eastman M30036-P Polyethylene (discontinued **) M30036-P is an extrusion coating performance polymer suggested for applications requiring performance similar to LLDPE. Compared to low density coating resins, M30036-P offers superior heat seal st..
Tensile Strength, Ultimate	9.50 MPa	1380 psi	ASTM D638
ITW Plexus Plexusâ„¢ AO420FS Methacrylate Adhesive Two-part adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies.
Tensile Strength, Ultimate	9.50 MPa	1380 psi	at max load; ISO 527
A. Schulman FORMION™ FI 241E Non-Reinforced, Extrusion Grade Ionomer Alloy DescriptionFormion® FI 241E is a patented non-reinforced, extrusion grade Ionomer alloy. It has bee formulated for high durability, low gloss, and low temperature ductility.ApplicationFormion® FI..
Tensile Strength, Ultimate	9.50 MPa	1380 psi	at max load; ISO 527
A. Schulman FORMION™ FI 241E Non-Reinforced, Extrusion Grade Ionomer Alloy DescriptionFormion® FI 241E is a patented non-reinforced, extrusion grade Ionomer alloy. It has bee formulated for high durability, low gloss, and low temperature ductility.ApplicationFormion® FI..
Tensile Strength, Ultimate	9.50 MPa	1380 psi	at max load; ISO 527
A. Schulman FORMION™ FI 241E Non-Reinforced, Extrusion Grade Ionomer Alloy DescriptionFormion® FI 241E is a patented non-reinforced, extrusion grade Ionomer alloy. It has bee formulated for high durability, low gloss, and low temperature ductility.ApplicationFormion® FI..
Tensile Strength, Ultimate	9.50 MPa	1380 psi	at max load; ISO 527
A. Schulman FORMION™ FI 241E Non-Reinforced, Extrusion Grade Ionomer Alloy DescriptionFormion® FI 241E is a patented non-reinforced, extrusion grade Ionomer alloy. It has bee formulated for high durability, low gloss, and low temperature ductility.ApplicationFormion® FI..
Tensile Strength, Ultimate	9.50 MPa	1380 psi	at max load; ISO 527
A. Schulman FORMION™ FI 241E Non-Reinforced, Extrusion Grade Ionomer Alloy DescriptionFormion® FI 241E is a patented non-reinforced, extrusion grade Ionomer alloy. It has bee formulated for high durability, low gloss, and low temperature ductility.ApplicationFormion® FI..
Tensile Strength, Ultimate	9.50 MPa	1380 psi	at max load; ISO 527
A. Schulman FORMION™ FI 241E Non-Reinforced, Extrusion Grade Ionomer Alloy DescriptionFormion® FI 241E is a patented non-reinforced, extrusion grade Ionomer alloy. It has bee formulated for high durability, low gloss, and low temperature ductility.ApplicationFormion® FI..
Tensile Strength, Ultimate	9.51 MPa	1380 psi
Dow Corning SILASTIC® 7-4870 BIOMEDICAL GRADE LSR, KIT Silastic® BioMedical Grade Liquid Silicone Rubbers are heat cured elastomer raw materials for use by customers fabricating medical devices.Information provided by Dow Corning
Tensile Strength, Ultimate	9.51 MPa	1380 psi
Dow Corning SILASTIC® LSR 9682-50 PARTS A&B 50 Durometer, 2-part, 1 to 1 mix, clear Liquid Silicone RubberInformation provided by Dow Corning
Tensile Strength, Ultimate	9.50 MPa	1380 psi	Vulcanizate, Press cured, TC95 +3min at 160°C
Dow Nordel® IP 4520 General Purpose Compound FormulationNordel® IP 4520
Tensile Strength, Ultimate	9.50 MPa	1380 psi	Vulcanizate, Press cured, TC95 +3min at 160°C
Dow Nordel® IP 5565 General Purpose Molding FormulationNordel® IP 5565
Tensile Strength, Ultimate	9.51 MPa	1380 psi	After 7 days at 257°F (125°C); ASTM D573; ISO 188
Advanced Polymer Alloys Alcryn® 4670 NC Melt Processable Rubber Alcryn melt-processable rubber (MPR) is a true rubber, based on a partially cross-linked, chlorinated olefin interpolymer alloy. Alcryn is designed for the manufacture of rubber parts with high prod..