Thermal Properties | Metric | English | Comments |
---|---|---|---|
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | Recommended |
Nye Lubricants 374B (RL) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | Recommended |
Nye Lubricants 723F6-EP (RL) Rheolube Grease Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | Recommended |
Nye Lubricants 825F-1 (FG) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | Recommended |
Nye Lubricants 854B (FG) Synthetic Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | Recommended |
Nye Lubricants NPE-UC9 Oil Information provided by Nye Lubricants. |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | Continuous |
Nylacast Aquanyl Nylon 612 Copolymer Aquanyl is a copolymer of Nylon 6 and Nylon 12 produced via the anionic polymerization process using the monomer's Caprolactam and Laurinlactam. It has reduced water absorption, improved stability a.. |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | Non-brittle after 3 minutes |
Precision Polymer Engineering E80B Ethylene Propylene Rubber General Purpose, Ethylene Propylene Terpolymer (EPT) 75-85 IRHD. Terpolymer of ethylene, propylene and diene monomers. ASTM & ISO designation = EPDM.Applications: Excellent water and steam resistan.. |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | |
Precision Polymer Engineering N80N Nitrile Rubber Nitrile Rubber, 76-85 °IRHD. Copolymer of acrylonitrile and butadiene. Meets Aerospace Specification DTD5595A Grade 80. ASTM designation = NBR. ISO designation = NBR.Applications: Sealing petroleum.. |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | |
Parker Chomerics CHO-SHIELD® 4966 Conductive Silicone Coating Conductive Silicone Coating. This is a conductive silver-filled silicone coating. This three-component system is capable of providing 60 dB of shielding effectiveness above 30 MHz. The coating utili.. |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | Non-brittle after 3 minutes |
Precision Polymer Engineering C50M Chloroprene Rubber Chloroprene Rubber, 46-55 °IRHD. Formulated to meet British Standard BS2752 grade C50.Applications: A versatile rubber with good compression set properties, giving moderate resistance to petroleum.. |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | |
Garlock STRESS SAVER® 6800 EPDM Gasketing More economical gasket where a PTFE envelope is not required.Raised, molded-in sealing rings seal with 75% less surface area for high performance in non-metallic flangesMedia: Water, very mild acid.. |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | |
Menzolit Menzolit® SMC 0650 Unsaturated Polyester UP SMC 0650 Low pressure SMC for large panels when moulding force becomes critical. Specific moulding pressure < 20 bar. A Special molding procedure is necessary.Information Provided by Menzolit |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | |
Menzolit Menzolit® SMC 0290 Unsaturated Polyester UP SMC 0290 is a specially formulated SMC processable by injection moulding. The gentle production process prevents the fiber from any damage. Parts made of SMC 0290 reach higher levels of strength and.. |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | Continuous |
Schwartz Technical Plastics LAMIGAMID® 310 Cast Polyamide 6, Conditioned Application: sheaves, wheels, rollers, mandrell segments, coupling parts, vibrator parts etc.Information provided by Schwartz Technical Plastics GmbH |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | |
Zell-Metall Engineering Plastics Zellamid 1100 Zellamid® 1100 is the registered trademark for Zell-Metalls cast nylon 6 in different qualities.Our standard quality is a heavy duty, high impact, wear and heat resistant polyamide. It offers .. |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | |
Trelleborg R572 Natural Rubber Polyisoprene All information provided by Trelleborg |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | |
Trelleborg Emerson & Cuming Eccobond® 15 LV Variable Hardness Low Viscosity Catalyst Emerson & Cuming 15 LV Eccobond® Variable Hardness Low Viscosity CatalystLow viscosity. Easy-to-use, simple mix ratios. Hardness of cured castings can be controlled by the amount of hardener used. .. |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | |
Loctite® Shadowcure™ 394 Acrylic/urethane UV Coating Conformal CoatingsConformal coatings are thin dielectric coatings that extend the longevity of circuit boards by protecting components and traces from corrosion, shorts, and mechanical damage. Locti.. |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | |
Dow Corning 7 RELEASE COMPOUND Silicone-based compound, light consistencyInformation provided by Dow Corning |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | |
ChevronTexaco Wheel End Grease FeaturesChevron Wheel End Grease is a high performance grease specifically engineered for trailer wheel-ends operating in most conditions.It is formulated with ISOSYN™ base stocks, a unique polyure.. |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | |
Aremco Aremco-Bond™ 2340 High Temperature Epoxide Potting Compound High Temperature, Low Viscosity, Low Expansion, High Glass Transition Temperature & Chemical Resistance |
|||
Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | Service |
3M 7905 Screen Printable Sheet Polyester Label Material 3M™ Screen Printable Sheet Polyester Label Materials are durable, high performance materials that offer excellent thermal stability, moisture resistance and chemical resistance. These materials uti.. |
|||
Minimum Service Temperature, Air | <= -40.0 °C | <= -40.0 °F | Low Temperature Flexural Test; EN 495-5 |
Lucobit Lucofin® 1412-t1 Polyolefin TPO Granules, Light Grey Lucofin are colored, highly stabilized polyolefin-based TPO granules. The t1 series is distinguished by good tenacity, high biaxial extensibility and flexibility outstanding breaking strength, and .. |