Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 10.8 µm/m-°C @Temperature 900 °C |
6.00 µin/in-°F @Temperature 1650 °F |
|
Plansee CFY Chromium-Iron-Yttrium The most typical use for CFY is as interconnects in fuel cells.Characteristics: Coefficient of expansion - designed for compatibility with that of the electrolyte in fuel cells Corrosion resistance.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 20.0 - 100 °C |
6.00 µin/in-°F @Temperature 68.0 - 212 °F |
|
Kennametal Stellite Nucalloy® 488 High-Silicon Nickel-Base Hardfacing Alloy Nucalloy® alloys are unique, patented, high-silicon, nickel-base hardfacing alloys that are designed to have optimum combinations of hardness and toughness, similar to the cobalt base alloys . B.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 20.0 - 100 °C |
6.00 µin/in-°F @Temperature 68.0 - 212 °F |
|
Kennametal Stellite Stellite® 98M2 cast Adhesive wear test data P/M 0.58 Typical applications include vane plugs, fuel metering pins, spacer bushings, ball bearing blanks, race bearing blanks, diesel engine exhaust, fluid valve seats, saw.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 25.0 - 100 °C |
6.00 µin/in-°F @Temperature 77.0 - 212 °F |
|
Haynes 242® alloy Age-hardenable, high ductility in the aged condition, lower thermal expansion than most alloys, very good oxidation resistance up to 815°C, excellent low cycle fatigue properties, very good therm.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 25.0 - 100 °C |
6.00 µin/in-°F @Temperature 77.0 - 212 °F |
|
Haynes 242® alloy, after 4000 hours exposure at 650°C (1200°F) Age-hardenable, high ductility in the aged condition, lower thermal expansion than most alloys, very good oxidation resistance up to 815°C, excellent low cycle fatigue properties, very good therm.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 25.0 - 100 °C |
6.00 µin/in-°F @Temperature 77.0 - 212 °F |
|
Haynes 242® alloy, after 8000 hours exposure at 650°C (1200°F) Age-hardenable, high ductility in the aged condition, lower thermal expansion than most alloys, very good oxidation resistance up to 815°C, excellent low cycle fatigue properties, very good therm.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 25.0 - 100 °C |
6.00 µin/in-°F @Temperature 77.0 - 212 °F |
|
Haynes 242® alloy, cold reduced sheet, annealed and aged Age-hardenable, high ductility in the aged condition, lower thermal expansion than most alloys, very good oxidation resistance up to 815°C, excellent low cycle fatigue properties, very good therm.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 20.0 - 204 °C |
6.00 µin/in-°F @Temperature 68.0 - 399 °F |
|
HP Alloys Alloy B-2, Solution Treated, 40% Cold Worked Solution Treated, 40% Cold Worked applies to tensile and/or hardness; other properties are typical of this alloy.Data provided by High Performance Alloys, Inc. and Haynes International. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 20.0 - 300 °C |
6.00 µin/in-°F @Temperature 68.0 - 572 °F |
|
Schott N-PSK53A Glass Information Provided by SCHOTT North America, Inc. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 20.0 - 199 °C |
6.00 µin/in-°F @Temperature 68.0 - 390 °F |
|
EDRO UltraChem® #15 Precipitation Hardening Stainless Mold Steel Ultrachem® is a chromium-nickel precipitation-hardening stainless steel, a modified PH alloy grade, which is characterized by: exceptional corrosion resistance, uniform hardness in all dimensions, .. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 21.1 - 93.3 °C |
6.00 µin/in-°F @Temperature 70.0 - 200 °F |
A and H900 |
Crucible Steel 15-5 Precipitation Hardening Stainless Steel Crucible 15-5 is a Premium Quality precipitation-hardening stainless steel which is capable of high strength and hardness levels after a relatively simple heat-treatment procedure. This grade is a V.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 21.1 - 93.3 °C |
6.00 µin/in-°F @Temperature 70.0 - 200 °F |
A and H900 |
Crucible Steel 17Cr-4Ni Super-X® Precipitation Hardening Stainless Steel Crucible 17Cr-4Ni is a version of 17CR-4Ni which has been modified to substantially improve machinability and other properties. Patented 17Cr-4Ni Super-X meets industry specifications for 17Cr-4Ni. .. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 0.000 - 316 °C |
6.00 µin/in-°F @Temperature 32.0 - 600 °F |
|
Crucible Steel 440C Chromium Steel Crucible 440C is a hardenable chromium steel. It has one of the highest attainable hardnesses of the corrosion and heat resisting grades. This grade is magnetic at all times.Information provided b.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 199 °C |
6.00 µin/in-°F @Temperature 390 °F |
hardened to 62 HRC |
Bohler-Uddeholm UDDEHOLM VANADIS 10 SUPERCLEAN 3 Powder Metallurgical Cold Work Tool Steel Chromium-molybdenum-vanadium alloyed steelUddeholm Vanadis 10 is a high vanadium alloyed powder metallurgy tool steel offering a unique combination of an excellent abrasive wear resistance in combin.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 199 °C |
6.00 µin/in-°F @Temperature 390 °F |
hardened to 60 HRC |
Bohler-Uddeholm UDDEHOLM VANADIS 4 EXTRA® Powder Metallurgically Produced Tool Steel Description: Uddeholm Vanadis 4 Extra is a chromiummolybdenum-vanadium alloyed steel Vanadis 4 Extra is characterized by: Very good ductility High abrasive-adhesive wear resistance High compressive.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 21.0 - 93.0 °C |
6.00 µin/in-°F @Temperature 69.8 - 199 °F |
|
AK Steel 15-5 PH® Precipitation Hardening Stainless Steel, Condition A AK Steel 15-5 PH® provides high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), and good toughness in both base metal and welds. Short-time, .. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 21.0 - 93.0 °C |
6.00 µin/in-°F @Temperature 69.8 - 199 °F |
|
AK Steel 15-5 PH® Precipitation Hardening Stainless Steel, Condition H 900 AK Steel 15-5 PH® provides high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), and good toughness in both base metal and welds. Short-time, .. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 24.0 - 260 °C |
6.00 µin/in-°F @Temperature 75.2 - 500 °F |
|
AK Steel 400 Ferritic Stainless steel AK Steel 400 is one of the most economical chromium ferritic stainless steels. It has corrosion and oxidation resistance comparable to Type 410 stainless steel with good fabricating characteristics.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 0.000 - 100 °C |
6.00 µin/in-°F @Temperature 32.0 - 212 °F |
|
AK Steel 410S Ferritic Stainless steel AK Steel 410S Stainless Steel is a non-hardening modification of Type 410. A small titanium addition minimizes austenite formation at high temperatures, thereby restricting the alloy's ability to h.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 24.0 - 93.0 °C |
6.00 µin/in-°F @Temperature 75.2 - 199 °F |
H900 Condition |
Carpenter Custom 450® Stainless Steel, Condition H1000 (Age Hardened 538°C (1000°F)) Data provided by Carpenter Technology Corporation.Custom 450® stainless is a martensitic age-hardenable stainless steel which exhibits very good corrosion resistance (similar to that of Stainless T.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 20.0 - 400 °C |
6.00 µin/in-°F @Temperature 68.0 - 752 °F |
|
Assab Steels ASSAB XW-5 Cold Work Steel ASSAB XW-5 is a high-carbon, high chromium tool steel alloyed with tungsten, characterized by:High wear resistanceHigh compressive strengthHigh surface hardness after hardeningGood through-hardening.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 20.0 - 700 °C |
6.00 µin/in-°F @Temperature 68.0 - 1290 °F |
|
ATI Allegheny Ludlum Type 441 Alloy Stainless Steel Allegheny Ludlum stainless Type 441 alloy is a heat resisting ferritic grades providing good oxidation and corrosion resistance for applications like automotive exhaust system components. Dual stab.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 20.0 - 700 °C |
6.00 µin/in-°F @Temperature 68.0 - 1290 °F |
|
ATI Allegheny Ludlum Type AL 441HP™ Stainless Steel Alloy Allegheny Ludlum stainless Type AL 441HP™ alloy is a heat resisting ferritic grade providing good oxidation and corrosion resistance for applications like automotive exhaust system components. Dua.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 24.0 - 93.0 °C |
6.00 µin/in-°F @Temperature 75.2 - 199 °F |
H900 Condition |
Carpenter Custom 450® Stainless Steel, Condition H1150 (Age Hardened 621°C) Data provided by Carpenter Technology Corporation.Custom 450® stainless is a martensitic age-hardenable stainless steel which exhibits very good corrosion resistance (similar to that of Stainless T.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 21.0 - 93.0 °C |
6.00 µin/in-°F @Temperature 69.8 - 199 °F |
|
Carpenter Custom 630 (17-Cr-4Ni) Precipitation Hardening Stainless Steel, Annealed Data provided by Carpenter Technology Corporation.Custom 630 (17Cr-4Ni) is a martensitic precipitation/age-hardening stainless steel offering high strength and hardness along with excellent corrosio.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 21.0 - 93.0 °C |
6.00 µin/in-°F @Temperature 69.8 - 199 °F |
|
Carpenter Custom 630 (17-Cr-4Ni) Precipitation Hardening Stainless Steel, Condition H 900 (Age-Hardened 482°C/1hr/AC) Data provided by Carpenter Technology Corporation.Custom 630 (17Cr-4Ni) is a martensitic precipitation/age-hardening stainless steel offering high strength and hardness along with excellent corrosio.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 25.0 - 100 °C |
6.00 µin/in-°F @Temperature 77.0 - 212 °F |
|
Haynes 242® alloy, hot rolled plate, annealed and aged Age-hardenable, high ductility in the aged condition, lower thermal expansion than most alloys, very good oxidation resistance up to 815°C, excellent low cycle fatigue properties, very good thermal.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 24.0 - 93.0 °C |
6.00 µin/in-°F @Temperature 75.2 - 199 °F |
H900 Condition |
Carpenter Custom 450® Stainless Steel, Condition H1050 (Age Hardened 566°C) Data provided by Carpenter Technology Corporation.Custom 450® stainless is a martensitic age-hardenable stainless steel which exhibits very good corrosion resistance (similar to that of Stainless T.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 21.1 - 204 °C |
6.00 µin/in-°F @Temperature 70.0 - 400 °F |
|
Schmolz + Bickenbach Formadur® PH X Superclean Plastic Mold Steel Description: Formadur® PH X Superclean is a corrosion-resistant, martensitic precipitation hardened stainless steelCharacteristics: Excellent resistance to corrosion; Excellent polishability; Excel.. |
|||
CTE, linear | 10.8 µm/m-°C @Temperature 20.0 - 200 °C |
6.00 µin/in-°F @Temperature 68.0 - 392 °F |
|
Schmolz + Bickenbach Formadur® 2316/2316 ESR Plastic Mold Steel Increased corrosion resistance in comparison to Formadur 2083, good polishability. Usually this grade is supplied quenched and tempered to 300 HBApplications: Molds for processing plastics with corr.. |