Thermal Properties | Metric | English | Comments |
---|---|---|---|
Flash Point | >= 200 °C | >= 392 °F | |
Precision Polymer Engineering B60B Styrene Butadiene Rubber Styrene-Butadiene Rubber (SBR) 55-65 °IRHD. Copolymer of styrene and butadiene.Applications: Good sealing resistance to brake fluids and water. Poor against petroleum oils, solvents and weather. .. |
|||
Flash Point | >= 200 °C | >= 392 °F | |
Precision Polymer Engineering E63B Ethylene Propylene Rubber Sulphur cured, Ethylene Propylene Rubber, 55-65 °IRHD. Terpolymer of ethylene, propylene and diene monomers. ASTM & ISO designation = EPDM.Applications: Excellent water and steam resistance with .. |
|||
Flash Point | >= 200 °C | >= 392 °F | |
Precision Polymer Engineering E70A Ethylene Propylene Rubber Blue, Ethylene Propylene Terpolymer (EPT), 65-75 °IRHD. Terpolymer of ethylene, propylene and diene monomers. Formulated using only those ingredients determined by the United States Food and Drug .. |
|||
Flash Point | >= 200 °C | >= 392 °F | |
Precision Polymer Engineering E70I Ethylene Propylene Rubber Resin cured Ethylene Propylene Terpolymer, 70-75 °IRHD. Terpolymer of ethylene, propylene and diene monomers. Formulated for applications involving water and steam.Applications: Recommended for us.. |
|||
Flash Point | >= 200 °C | >= 392 °F | |
Precision Polymer Engineering E70K Ethylene Propylene Rubber General purpose, peroxide cured, Ethylene Propylene Terpolymer, 70-75 °IRHD. Terpolymer of ethylene, propylene and diene monomers. To meet ASTM D2000/SAE J200 line call-out M5CA710, A25, B35, C32.. |
|||
Flash Point | >= 200 °C | >= 392 °F | |
Precision Polymer Engineering E80B Ethylene Propylene Rubber General Purpose, Ethylene Propylene Terpolymer (EPT) 75-85 IRHD. Terpolymer of ethylene, propylene and diene monomers. ASTM & ISO designation = EPDM.Applications: Excellent water and steam resistan.. |
|||
Flash Point | >= 200 °C | >= 392 °F | |
Precision Polymer Engineering E80K Ethylene Propylene Rubber General purpose, peroxide cured, Ethylene Propylene Terpolymer, 75-85 °IRHD. Terpolymer of ethylene, propylene and diene monomers. To meet ASTM D2000/SAE J200 line call-out MCA810, A25, B35, F17... |
|||
Flash Point | 200 °C | 392 °F | |
ExxonMobil Mobil Clean 10W-30 5000 Mobil Clean 5000 is formulated from high quality base stocks combined with modern performance additives, including an advanced detergent system to provide excellent engine cleanliness at oil drain i.. |
|||
Flash Point | 200 °C | 392 °F | |
ExxonMobil Mobil Clean 10W-30 7500 Mobil Clean 7500 is formulated from a combination of synthetic and conventional quality base stocks combined with modern performance additives, including an advanced cleaning additive system to prov.. |
|||
Flash Point | 200 °C | 392 °F | |
ExxonMobil Mobil Clean 10W-40 5000 Mobil Clean 5000 is formulated from high quality base stocks combined with modern performance additives, including an advanced detergent system to provide excellent engine cleanliness at oil drain i.. |
|||
Flash Point | 200 °C | 392 °F | ASTM D92 |
ExxonMobil Teresstic M Series 32LT The Teresstic M Series of products is the latest addition to the family of Teresstic turbine lubricant products, long recognized for their high quality and reliability. Teresstic M Series are design.. |
|||
Flash Point | 200 °C | 392 °F | |
ExxonMobil Mobil Clean 5W-20 Motor Oil Mobil Clean Motor Oil is formulated from quality base stocks combined with the most modern performance additives, including an advanced detergent system to provide excellent engine cleanliness. Thes.. |
|||
Flash Point | 200 °C | 392 °F | |
ExxonMobil Mobil Clean 10W-40 Motor Oil Mobil Clean Motor Oil is formulated from quality base stocks combined with the most modern performance additives, including an advanced detergent system to provide excellent engine cleanliness. Thes.. |
|||
Flash Point | >= 200 °C | >= 392 °F | Pensky Martens closed cup; ASTM D93 |
Dow SPECFLEX™ NC 632 Polyol SPECFLEX™ NC 632 polyol is a specialty capped polyol. Its high molecular weight and primary hydroxyl content make it well suited for high resilience, flexible molded foams. CAS# 009082-00-2 0.. |
|||
Flash Point | >= 200 °C | >= 392 °F | Closed cup |
Dow Corning 1400 Antifoam 100% active silicone fluid containing a suspension of finely powdered silica to enhance its defoaming efficiency.Information provided by Dow Corning |
|||
Flash Point | 200 °C | 392 °F | ASTM D92 |
ExxonMobil Fenso 51 FENSO is the brand name for a series of premium quality oils designed specially for use as heat-treating fluids. The FENSO line consists of two grades: one medium-viscosity, dual-purpose oil for bot.. |
|||
Flash Point | 200 °C | 392 °F | |
ExxonMobil Mobil Clean 10W-30 Motor Oil Mobil Clean Motor Oil is formulated from quality base stocks combined with the most modern performance additives, including an advanced detergent system to provide excellent engine cleanliness. Thes.. |
|||
Flash Point | 200 °C | 392 °F | |
BASF Lupranate® 245 Isocyanate Description: Lupranate® 245 Isocyanate is a low viscosity polymeric diphenylmethane diisocyanate (polymeric MDI) containing a very high amount of monomeric diphenylmethane diisocyanate (pure MDI)In.. |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D1929 |
BASF Neopolen® P 9225 K 0.04 g/cc Core density; Expanded Polypropylene (Europe) Description: Neopolen® P 9225 K is expanded Polypropylene supplied in the form of beads. The cells are largely closed.Physical properties of moldings made from Neopolen® P 9225 K.Note: In order to.. |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D1929 |
BASF Neopolen® P 9230 A 0.07 g/cc Core density; Expanded Polypropylene (Europe) Description: Neopolen® P 9230 A is expanded Polypropylene supplied in the form of beads. The cells are largely closed.Physical properties of moldings made from Neopolen® P 9230 A.Note: In order to.. |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D1929 |
BASF Neopolen® P 9230 D 0.06 g/cc Core density; Expanded Polypropylene (Europe) Description: Neopolen® P 9230 D is expanded Polypropylene supplied in the form of beads. The cells are largely closed.Physical properties of moldings made from Neopolen® P 9230 D.Note: In order to.. |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D1929 |
BASF Neopolen® P 9230 K 0.05 g/cc Core density; Expanded Polypropylene (Europe) Description: Neopolen® P 9230 K is expanded Polypropylene supplied in the form of beads. The cells are largely closed.Physical properties of moldings made from Neopolen® P 9230 K.Note: In order to.. |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D1929 |
BASF Neopolen® P 9235 0.04 g/cc Core density; Expanded Polypropylene (Europe) Description: Neopolen® P 9235 is expanded Polypropylene supplied in the form of beads. The cells are largely closed.Physical properties of moldings made from Neopolen® P 9235.Note: In order to mea.. |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D1929 |
BASF Neopolen® P 9270 0.08 g/cc Core density; Expanded Polypropylene (Europe) Description: Neopolen® P 9270 is expanded Polypropylene supplied in the form of beads. The cells are largely closed.Physical properties of moldings made from Neopolen® P 9270.Note: In order to mea.. |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D1929 |
BASF Neopolen® P 9335 MG 0.035 g/cc Core density; Expanded Polypropylene (Europe) Description: Neopolen® P 9333 MG is expanded Polypropylene supplied in the form of beads. The cells are largely closed.Physical properties of moldings made from Neopolen® P 9333 MG.Note: In order .. |
|||
Flash Point | 200 °C | 392 °F | |
BASF Lupranate® 280 Isocyanate Description: Lupranate® 280 Isocyanate is an isocyanate blend of monomeric and polymeric MDI. Typical use is for flexible slab stock and molded Visco-Elastic memory foams.Information provided by BA.. |
|||
Flash Point | 200 °C | 392 °F | |
BASF Lupranate® 5060 Isocyanate Description: Lupranate® 5060 Isocyanate is a low functional prepolymer based on monomeric MDI. Lupranate® 5060 isocyanate is suitable for use in a broad range of flexible, semi-flexible, and cast .. |
|||
Flash Point | >= 200 °C | >= 392 °F | ASTM D1929 |
BASF Neopolen® P 9270 0.11 g/cc Core density; Expanded Polypropylene (Europe) Description: Neopolen® P 9270 is expanded Polypropylene supplied in the form of beads. The cells are largely closed.Physical properties of moldings made from Neopolen® P 9270.Note: In order to mea.. |