- HOME
- POLYMER SEARCH
- Polymer Property : Maximum Service Temperature, Air = 700 °F
Polymer Property : Maximum Service Temperature, Air = 700 °F Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 371 °C | 700 °F | Film Temperature |
| Paratherm Corporation Paratherm™ HR™ Heat Transfer Fluid Paratherm HR™ Heat Transfer Fluid is an alkylated-aromatic based heat transfer fluid formulated for closed loop liquid phase heating to 650°F in fired heaters and 675°F in waste heat recovery and.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | max. recommended film temperature |
| Paratherm Corporation Paratherm™ HT Heat Transfer Fluid Paratherm HT Heat Transfer Fluid is a partially hydrogenated terphenyl based product designed for closed-loop liquid phase heating to 650°F (343°C) in fired heaters and 675°F (358°C) in solid fu.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | Intermittent, silicone side |
| Dielectric Polymers NT-1020 Silicone/Acrylic Double Coated Tape
(discontinued **) Crosslinked silicone and acrylic adhesive with 2 mil polyester film release liner backing on the silicone side and moisture stable PE coated kraft (60#) on the acrylic side.Features: Chemical resist.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | Intermittent |
| Dielectric Polymers TRANS-SIL® NT-1001 Silicone Transfer Adhesive
(discontinued **) Crosslinked silicone adhesive with 2 polyester film release liners.Features: Resistant to extreme temperaturesHigh bond strengthChemical resistantApplications: High performance bonding and other app.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | |
| PSM Industries Ferro-TiC® CS-40 Martensitic Stainless Steel Ferro-TiC® Steel alloy bonded titanium carbide (TiC) materials are made by advanced powder metallurgy technologies. Unlike tungsten carbide, Ferro-TiC® is bonded by hardenable alloy matrices.High.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | |
| Garlock 2900 Compressed Aramid Fiber Gasketing, Nitrile Binder Aramid fibers with a nitrile binder.Ideal for utility servicesExcellent sealabilityImproved thermal stabilityGood for general serviceMedia: Water, aliphatic hydrocarbons, oils, gasolineInformation .. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | |
| Garlock 2920 Compressed Aramid Fiber Gasketing, SBR Binder Aramid fibers with a SBR binder.Ideal for utility servicesExcellent sealabilityImproved thermal stabilityGood for general serviceMedia: Water, steam, inert gases, mild acids and mild alkaliesInform.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | |
| Garlock 2940 Compressed Aramid Fiber Gasketing, SBR Binder Aramid fibers with a Styrene-Butadiene (SBR) Binder.Ideal for utility servicesExcellent sealabilityImproved thermal stabilityGood for general serviceMedia: Water, aliphatic hydrocarbons, oils, gasol.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | |
| Garlock 2950 Compressed Aramid Fiber Gasketing, Nitrile Binder Aramid fibers with a nitrile binder.Ideal for utility servicesExcellent sealabilityImproved thermal stabilityGood for general serviceMedia: Water, aliphatic hydrocarbons, oils, gasolineInformation .. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | |
| Garlock BLUE-GARD® 3400 Compressed Aramid Fiber Gasketing, SBR Binder Aramid fiber, high-temperature fillers, and SBR binder. Often used in low-pressure saturated steam applications.Excellent SealabilityUnique blend of aramid fibers, fillers, and a SBR rubber binder p.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | Continuous |
| Mid-Mountain Materials HYTEX® 5000 High Carbon Industrial Textile (PAN) Description: HYTEX is the trademark for the textile products manufactured by Mid-Mountain Materials, Inc. Hytex high performance textile products are manufactured from various yarns of varying chemi.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | Continuous |
| Mid-Mountain Materials HYTEX® 5100 High Carbon Industrial Textile (PAN) Description: HYTEX is the trademark for the textile products manufactured by Mid-Mountain Materials, Inc. Hytex high performance textile products are manufactured from various yarns of varying chemi.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | intermittent |
| Lucas-Milhaupt Silvaloy® A24 Brazing Alloy Silvaloy A24 does not contain cadmium and is a lower silver modification to the standard Bag-20 at 30 percent. Its slightly higher melt temperature provides improved mechanical strength when exposed.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | |
| Lucas-Milhaupt Silvaloy® A54N Brazing Alloy Silvaloy A54N is a silver brazing alloy suitable for furnace brazing due to its low zinc content. Its broader melting range is helpful where clearances are not uniform. During melting, Silvaloy A54N.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | |
| Garlock BLUE-GARD® 3000 Compressed Aramid Fiber Gasketing, Nitrile Binder Aramid fiber, high-temperature fillers, and nitrile (NBR) binder.Excellent SealabilityUnique blend of aramid fibers, fillers, and a NBR rubber binder provides improved torque retention and lowered e.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | |
| Lucas-Milhaupt Silvacore® A50N Flux Cored Brazing Alloy Silvacote A50N Flux Coated Rod is a cadmium free silver brazing alloy that has found numerous applications for joining 300 series stainless steel in food, medical, and dental fields. Addition of nic.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | |
| Master Bond MB600S Aqueous Based Sodium Silicate System for EMI/RFI Shielding Description: Master Bond MB600S is a silver containing aqueous based sodium silicate system used as a coating in situations where EMI shielding effectiveness is paramount. Electromagnetic interferen.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | |
| Master Bond MB600SCN Aqueous Based Electrically Conductive Sodium Silicate Coating Master Bond MB600SCN is an aqueous based, sodium silicate system with a silver coated nickel filler. It is intended for use in applications where very good shielding effectiveness is required and co.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | Short Term |
| Hexcel® HexWeb® HRH-327 - 3/16 - 4.0 Fiberglass Reinforced Polyimide Honeycomb Designation: Material-Cell Size (inches)-DensityHexWeb® HRH-327 is a glass-fabric, bias weave reinforced plastic honeycomb that incorporates a polyimide resin system for the node adhesive as well a.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | Short Term |
| Hexcel® HexWeb® HRH-327 - 3/16 - 4.5 Fiberglass Reinforced Polyimide Honeycomb Designation: Material-Cell Size (inches)-DensityHexWeb® HRH-327 is a glass-fabric, bias weave reinforced plastic honeycomb that incorporates a polyimide resin system for the node adhesive as well a.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | Short Term |
| Hexcel® HexWeb® HRH-327 - 3/16 - 5.0 Fiberglass Reinforced Polyimide Honeycomb Designation: Material-Cell Size (inches)-DensityHexWeb® HRH-327 is a glass-fabric, bias weave reinforced plastic honeycomb that incorporates a polyimide resin system for the node adhesive as well a.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | Short Term |
| Hexcel® HexWeb® HRH-327 - 3/16 - 6.0 Fiberglass Reinforced Polyimide Honeycomb Designation: Material-Cell Size (inches)-DensityHexWeb® HRH-327 is a glass-fabric, bias weave reinforced plastic honeycomb that incorporates a polyimide resin system for the node adhesive as well a.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | Short Term |
| Hexcel® HexWeb® HRH-327 - 3/16 - 8.0 Fiberglass Reinforced Polyimide Honeycomb Designation: Material-Cell Size (inches)-DensityHexWeb® HRH-327 is a glass-fabric, bias weave reinforced plastic honeycomb that incorporates a polyimide resin system for the node adhesive as well a.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | Short Term |
| Hexcel® HexWeb® HRH-327 - 1/8 - 3.2 Fiberglass Reinforced Polyimide Honeycomb Designation: Material-Cell Size (inches)-DensityHexWeb® HRH-327 is a glass-fabric, bias weave reinforced plastic honeycomb that incorporates a polyimide resin system for the node adhesive as well a.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | |
| Cotronics Duralco™ 4703 Adhesive and Tooling Compound High temperature resin reinforced with ceramic and metallic fibers and particles, resulting in high thermal stability. Easily machined to close tolerances and will repair and rebuild worn or cracke.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | continuous operation |
| 3M FG7-14 FB-700 Filter Bag Fabric 3M has developed a line of advanced textiles for manufacturing high temperature filter bags which can be used at temperatures up to 700°F (371°C), or for those even higher temperature applications.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | Tensile strength at 85% of RT |
| Touchstone MetPreg™ Fiber Reinforced Aluminum MetPreg™ is a unique Fiber Reinforced Aluminum (FRA) material, a true metal matrix composite (MMC), that makes use of all traditional composite processing techniques. MetPreg has all the advantages.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | Intermittent |
| Dielectric Polymers TRANS-SIL® NT-1005 Silicone Transfer Adhesive
(discontinued **) Crosslinked silicone adhesive with 2 polyester film release liners.Features: Resistant to extreme temperaturesHigh bond strengthChemical resistantApplications: High performance bonding and other app.. |
|||
| Maximum Service Temperature, Air | 371 °C | 700 °F | |
| Garlock BLUE-GARD® 3700 Compressed Aramid Fiber Gasketing, EPDM Binder Aramid fiber, high-temperature fillers, and EPDM binder. For service areas with weak causticsExcellent SealabilityUnique blend of aramid fibers, fillers, and a EPDM rubber binder provides improved t.. |
|||
Copyright © lookpolymers.com All Rights Reserved