Polymer Property : Thermal Conductivity = 160 BTU-in/hr-ftÂ²-Â°F Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Thermal Properties	Metric	English	Comments
Thermal Conductivity	23.1 W/m-K @Temperature 760 Â°C	160 BTU-in/hr-ftÂ²-Â°F @Temperature 1400 Â°F
Haynes R-41 alloy, Vacuum melted, exceptionally high strength at temperature between 649-982Â°C. Precipitation-hardening type, strength developed by various solutioning and aging heat treatments. Applications includ..
Thermal Conductivity	23.1 W/m-K @Temperature 760 Â°C	160 BTU-in/hr-ftÂ²-Â°F @Temperature 1400 Â°F
Haynes R-41 alloy, 0.635 mm thick sheet, solution heat treated at 1079Â°C, water quenched, 30 minutes at 1066Â°C, aged 16 hours at 760Â°C (1400Â°F), air cooled Vacuum melted, exceptionally high strength at temperature between 649-982Â°C. Precipitation-hardening type, strength developed by various solutioning and aging heat treatments. Applications includ..
Thermal Conductivity	23.1 W/m-K @Temperature 760 Â°C	160 BTU-in/hr-ftÂ²-Â°F @Temperature 1400 Â°F
Haynes R-41 alloy, sheet 0.762-2.54 mm exclusive, 30 minutes at 1066Â°C, air cooled, aged 16 hours at 760Â°C (1400Â°F) Vacuum melted, exceptionally high strength at temperature between 649-982Â°C. Precipitation-hardening type, strength developed by various solutioning and aging heat treatments. Applications includ..
Thermal Conductivity	23.0 W/m-K @Temperature 600 Â°C	160 BTU-in/hr-ftÂ²-Â°F @Temperature 1110 Â°F
Haynes HastelloyÂ® G-35Â® Nickel Alloy Gas Tungsten Arc Welded (GTAW) Plate Known for its corrosion performance, HASTELLOYÂ® G-35Â® alloy was designed to resist â€œwet processâ€ phosphoric acid, which is widely used in the production of fertilizers. Tests indicat..
Thermal Conductivity	23.0 W/m-K @Temperature 100 °C	160 BTU-in/hr-ft²-°F @Temperature 212 °F
CoorsTek ADS-995R MidFilm™ 99.5% Alumina Thick Film Applications: thick films and lasers
Thermal Conductivity	23.0 W/m-K @Temperature 150 °C, Time 3600 sec	160 BTU-in/hr-ft²-°F @Temperature 302 °F, Time 1.00 hour	+ 200°C/1Hr
Epoxy Technology EPO-TEK® H20-HC Electrically Conductive Epoxy Product Description: EPO-TEK® H20E-HC is a two component, 100% solids silver-filled epoxy system designed specifically for chip bonding in microelectronic and optoelectronic applications. It is al..
Thermal Conductivity	23.0 W/m-K @Temperature <=200 °C	160 BTU-in/hr-ft²-°F @Temperature <=392 °F
CLAL-MSX ARCAP Anticorrosion AP4 H13 3/4 hard, Drawn Copper Alloy Description: The AP4 grade is less easy to turn than the other grades of ARCAP. It can however be machined without more difficulty than the nickel chromium molybdenum steels.High Corrosion Resistanc..
Thermal Conductivity	23.0 W/m-K @Temperature <=200 °C	160 BTU-in/hr-ft²-°F @Temperature <=392 °F
CLAL-MSX ARCAP Anticorrosion AP4 0 Annealed, Drawn Copper Alloy Description: The AP4 grade is less easy to turn than the other grades of ARCAP. It can however be machined without more difficulty than the nickel chromium molybdenum steels.High Corrosion Resistanc..
Thermal Conductivity	23.0 W/m-K @Temperature <=200 °C	160 BTU-in/hr-ft²-°F @Temperature <=392 °F
CLAL-MSX ARCAP Anticorrosion AP4 H11 1/4 hard, Drawn Copper Alloy Description: The AP4 grade is less easy to turn than the other grades of ARCAP. It can however be machined without more difficulty than the nickel chromium molybdenum steels.High Corrosion Resistanc..
Thermal Conductivity	23.0 W/m-K @Temperature <=200 °C	160 BTU-in/hr-ft²-°F @Temperature <=392 °F
CLAL-MSX ARCAP Anticorrosion AP4 H12 1/2 hard, Rolled Copper Alloy Description: The AP4 grade is less easy to turn than the other grades of ARCAP. It can however be machined without more difficulty than the nickel chromium molybdenum steels.High Corrosion Resistanc..
Thermal Conductivity	23.0 W/m-K @Temperature 399 °C	160 BTU-in/hr-ft²-°F @Temperature 750 °F	hardened to 62 HRC
Bohler-Uddeholm AISI D2 Cold Work Tool Steel AISI D2 is a high-carbon, high-chromium tool steel alloyed with molybdenum and vanadiumAISI AD2 is characterized by: High wear resistance High compressive strength Good through-hardening properties..
Thermal Conductivity	23.0 W/m-K @Temperature 400 °C	160 BTU-in/hr-ft²-°F @Temperature 752 °F
Assab Steels ASSAB XW-41 Cold Work Steel XW-41 is a high-carbon, high chromium tool steel alloyed with molybdenum and vanadium characterized by:High wear resistanceHigh compressive strength Good through-hardening propertiesHigh stability i..
Thermal Conductivity	23.0 W/m-K @Temperature 400 °C	160 BTU-in/hr-ft²-°F @Temperature 752 °F
Assab Steels ASSAB XW-5 Cold Work Steel ASSAB XW-5 is a high-carbon, high chromium tool steel alloyed with tungsten, characterized by:High wear resistanceHigh compressive strengthHigh surface hardness after hardeningGood through-hardening..
Thermal Conductivity	23.0 W/m-K @Temperature 500 °C	160 BTU-in/hr-ft²-°F @Temperature 932 °F
ATI Allegheny Ludlum Stainless Steel Type 201, 10% Cold Work (UNS S20100) Allegheny Ludlum Type 201 and 201L have the greatest tonnage of the Cr-Ni-Mn steels (200 series). Type 201 provides advantages over the 18-8 grades in certain applications. Lower cost manganese an..
Thermal Conductivity	23.0 W/m-K @Temperature 500 °C	160 BTU-in/hr-ft²-°F @Temperature 932 °F
ATI Allegheny Ludlum Stainless Steel Type 201L, 20% Cold Work (UNS S20103) Allegheny Ludlum Types 201 and 201L have the greatest tonnage of the Cr-Ni-Mn steels (200 series). Type 201L provides advantages over the 18-8 grades in certain applications. Lower cost manganese ..
Thermal Conductivity	23.0 W/m-K @Temperature 500 °C	160 BTU-in/hr-ft²-°F @Temperature 932 °F
ATI Allegheny Ludlum Stainless Steel Type 201L, 5% Cold Work (UNS S20103) Allegheny Ludlum Types 201 and 201L have the greatest tonnage of the Cr-Ni-Mn steels (200 series). Type 201L provides advantages over the 18-8 grades in certain applications. Lower cost manganese ..
Thermal Conductivity	23.0 W/m-K @Temperature 500 °C	160 BTU-in/hr-ft²-°F @Temperature 932 °F
ATI Allegheny Ludlum Stainless Steel Type 201, Annealed (UNS S20100) Allegheny Ludlum Type 201 and 201L have the greatest tonnage of the Cr-Ni-Mn steels (200 series). Type 201 provides advantages over the 18-8 grades in certain applications. Lower cost manganese an..
Thermal Conductivity	23.1 W/m-K @Temperature 760 °C	160 BTU-in/hr-ft²-°F @Temperature 1400 °F
Haynes R-41 alloy, Vacuum melted, exceptionally high strength at temperature between 649-982°C. Precipitation-hardening type, strength developed by various solutioning and aging heat treatments. Applications include ..
Thermal Conductivity	23.1 W/m-K @Temperature 149 °C	160 BTU-in/hr-ft²-°F @Temperature 300 °F
Schmolz + Bickenbach Formadur® 2083 Superclean Plastic Mold Steel Description: Formadur 2083 Superclean is an electro slag remelted (ESR) martensitic stainless steel developed for corrosion resistant applications and Supplied in the annealed conditionCharacteristi..