Electrical Properties | Metric | English | Comments |
---|---|---|---|
Dielectric Strength | 35.4 kV/mm | 899 kV/in | DIN 53481 |
Polikim ULPOLEN® 1000 UHMWPE Standard Standard Ulpolen® 1000 is the universal type primarily preferred on the condition that its technical properties meet operating environment requirements. It is more cost efficient compared to specia.. |
|||
Dielectric Strength | 35.4 kV/mm | 899 kV/in | DIN 53481 |
Polikim ULPOLEN® 500 UHMWPE Standard Standard Ulpolen® 1000 is the universal type primarily preferred on the condition that its technical properties meet operating environment requirements. It is more cost efficient compared to specia.. |
|||
Dielectric Strength | 35.4 kV/mm | 900 kV/in | Method A; ASTM D149 |
S&E Specialty Polymers TufShield™ FS-1000H-UVFG Insulating Compound Application: A UV and fungus resistant lead-free, low smoke generating, highly flame retardant jacketing and insulation compound designed for Plenum cable application. Compound exhibits excellent pr.. |
|||
Dielectric Strength | 35.4 kV/mm | 900 kV/in | ASTM D149 |
ExxonMobil Santoprene® 221-73 Thermoplastic Elastomer
(discontinued **) A soft, colorable, UV resistant thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide.. |
|||
Dielectric Strength | 35.4 kV/mm | 899 kV/in | ASTM D149 |
Rochling Engineered Plastics Polystone® Natural (UHMW-PE) Polystone® M is a highly versatile polymer that features: Low coefficient of friction Excellent abrasion resistance High-impact strength Chemical resistance Complies with FDA regulations under the .. |
|||
Dielectric Strength | 35.4 kV/mm | 899 kV/in | ASTM D149 |
Rochling Engineered Plastics Polystone® XL Cross linked (UHMW-PE) Polystone® M is a highly versatile polymer that features: Low coefficient of friction Excellent abrasion resistance High-impact strength Chemical resistance Complies with FDA regulations under the .. |
|||
Dielectric Strength | 35.4 kV/mm | 900 kV/in | ASTM D149 |
Arlon Thermabond® R37340X008 Primerless Electronic Adhesive
(discontinued **) Liner: 1 mil FEP; Product: uncured Silicone Rubber; Carrier: 3 mil PTFE coated fiberglas |
|||
Dielectric Strength | 35.4 kV/mm | 900 kV/in | Short Time; 1/8 inch; ASTM D149 |
G-11 Fiberglass Epoxy Laminate Sheet This glass-epoxy laminate is specified for its extremely high strength and high dimensional stability over temperature. G-11 is used for terminal boards, high humidity applications, electrical and e.. |
|||
Dielectric Strength | 35.4 kV/mm | 900 kV/in | |
Tra-Con Tra-Bond 293-1 General Purpose Instrument Epoxy Adhesive TRA-BOND 293-1 general purpose epoxy adhesive is designed to provide strong, resilient bonds to a variety of difficult-to-bond substrates, such as gold, nickel, silver, copper, and brass. The 293-se.. |
|||
Dielectric Strength | 35.4 kV/mm | 900 kV/in | |
Tra-Con Tra-Bond 293-21 General Purpose Epoxy Adhesive TRA-BOND 293-21 general purpose epoxy adhesive is designed to provide strong, resilient bonds to a variety of difficult-to-bond substrates, such as gold, nickel, silver, copper, and brass. The 293 s.. |
|||
Dielectric Strength | 35.4 kV/mm | 899 kV/in | Full-wave Impulse; ASTM D3426 |
DuPont™ Nomex® E56 Paper, 10 mil Nominal Thickness Nomex® Type E56 is designed for cost critical uses which require lesser amounts of mechanical and electrical strength than other Nomex® grades. It is thermally similar to Nomex® Type 410 but as.. |
|||
Dielectric Strength | 35.4 kV/mm | 899 kV/in | Full-wave Impulse; ASTM D3426 |
DuPont™ Nomex® E56 Paper, 20 mil Nominal Thickness Nomex® Type E56 is designed for cost critical uses which require lesser amounts of mechanical and electrical strength than other Nomex® grades. It is thermally similar to Nomex® Type 410 but as.. |
|||
Dielectric Strength | 35.4 kV/mm | 900 kV/in | ASTM D149 |
Arlon 51588R015 0.015" Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Interleave: LDPESide 1 Layer 2: Uncured Silicone RubberSide 1 Layer 1: Cured Silicone RubberSubstrate: Style 7628 FiberglassSide 2: Uncured Silicone RubberInterleave: LDPETh.. |
|||
Dielectric Strength | 35.4 kV/mm | 900 kV/in | ASTM D149 |
Arlon R34570R005 0.005" (0.127 mm) Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Interleave: Polyethylene Side 1: Uncured Silicone Rubber Substrate: Style 1080 Style FiberglassThis data represents typical values for the production material. The data should no.. |
|||
Dielectric Strength | 35.4 kV/mm | 900 kV/in | ASTM D149 |
Arlon R34572R005 0.005" (0.127 mm) Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Interleave: Polyethylene Side 1: Cured Silicone Rubber Substrate: Style 1080 Style FiberglassAppearance: Red silicone rubber on fiberglass clothThis data represents typical value.. |
|||
Dielectric Strength | 35.4 kV/mm | 900 kV/in | ASTM D149 |
Arlon 49586B010 0.0115" (0.292 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction: Side 1: Cured Silicone RubberSubstrate: Style 1681 FiberglassSide 2: Uncured Silicone RubberInterleave: Polyethylene This data represents typical values for the production mater.. |
|||
Dielectric Strength | 35.4 kV/mm | 899 kV/in | ASTM D149-95 |
Multibase Multi-ABS 2925 FR Flame Retardant ABS Data provided by Multibase. |
|||
Dielectric Strength | 35.4 kV/mm | 900 kV/in | |
3M MW Heat Shrink Tubing 3M Heat Shrink Tubing MW is a semi-rigid, 110°C heat-shrinkable polyolefin tubing that is a co-extruded and selectively cross-linked to provide an integral, meltable inner wall. When heated in exce.. |
|||
Dielectric Strength | 35.4 kV/mm | 900 kV/in | ASTM D149 |
Arlon Thermabond® 99A90N008 Primerless Electronic Adhesive
(discontinued **) Electrically insulating, thermally conductive, electronic adhesive. Bonds without primer. |
|||
Dielectric Strength | 35.4 kV/mm | 899 kV/in | ASTM D149-95 |
Multibase Multi-ABS 2945 FR Flame Retardant ABS Data provided by Multibase. |
|||
Dielectric Strength | 35.4 kV/mm | 899 kV/in | ASTM D149-95 |
Multibase Multi-ABS 3075 High Impact Data provided by Multibase. |
|||
Dielectric Strength | 35.4 kV/mm | 900 kV/in | ASTM D149 |
ExxonMobil Santoprene® 221-80 Thermoplastic Elastomer
(discontinued **) A soft, colorable, UV resistant thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide.. |
|||
Dielectric Strength | 35.4 kV/mm | 899 kV/in | ASTM D149 |
Rochling Engineered Plastics Polystone® Reprocessed (UHMW-PE) Polystone® M is a highly versatile polymer that features: Low coefficient of friction Excellent abrasion resistance High-impact strength Chemical resistance Complies with FDA regulations under the .. |