Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Cast Nylons Nycast® 6PA-MoS2 Nylon 6

Category Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Cast
Manufacturer Cast Nylons Limited
Trade Name Nycast®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Cast Nylons Nycast® 6PA-MoS2 Nylon 6.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
NYCAST® 6PA-MoS2 is a molybdenum disulphide filled Type 6 cast nylon. Finely divided MoS2 particles are suspended in the melt during polymerization. This gives the NYCAST® 6PA-MoS2 products improved compression strength over the regular Nycast 6PA products. Data provided by the manufacturer, Cast Nylons Limited.The data below are average values presented for comparison purposes. Actual property values may differ.
Physical Properties Metric English Comments
Density 1.16 g/cc
0.0419 lb/in³
ASTM D792
Water Absorption 0.50 %
0.50 %
24 hrs; ASTM D570
Water Absorption at Saturation 5.5 %
5.5 %
ASTM D570
Mechanical Properties Metric English Comments
Hardness, Rockwell R 120
120
ASTM D785
Hardness, Shore D 80
80
ASTM D2240
Tensile Strength, Ultimate 88.0 MPa
12800 psi
ASTM D638
Elongation at Break 20 - 45 %
20 - 45 %
ASTM D638
Tensile Modulus 3.60 GPa
522 ksi
ASTM D638
Flexural Yield Strength 114 MPa
16500 psi
ASTM D790
Flexural Modulus 3.20 GPa
464 ksi
ASTM D790
Compressive Yield Strength 114 MPa
16500 psi
10% Offset; ASTM D695
Compressive Modulus 2.20 GPa
319 ksi
ASTM D695
Shear Strength 72.0 MPa
10400 psi
ASTM D732
Izod Impact, Notched 0.400 J/cm
0.749 ft-lb/in
ASTM D256
Coefficient of Friction, Dynamic 0.22
0.22
Thermal Properties Metric English Comments
CTE, linear 90.0 µm/m-°C

@Temperature 20.0 °C
50.0 µin/in-°F

@Temperature 68.0 °F
ASTM D696
Melting Point 226 - 238 °C
439 - 460 °F
ASTM D789
Maximum Service Temperature, Air 110 °C
230 °F
Continuous service
166 °C
331 °F
Intermittent service
Deflection Temperature at 0.46 MPa (66 psi) 204 - 221 °C
399 - 430 °F
ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 166 - 204 °C
331 - 399 °F
ASTM D648
Electrical Properties Metric English Comments
Dielectric Constant 3.7

@Frequency 60 Hz
3.7

@Frequency 60 Hz
3.7

@Frequency 1000 Hz
3.7

@Frequency 1000 Hz
3.7

@Frequency 100000 Hz
3.7

@Frequency 100000 Hz
ASTM D150
Dielectric Strength 22.0 kV/mm
559 kV/in
Short time; ASTM D149
Copyright © lookpolymers.com All Rights Reserved