- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE A 7150 BLK
Multibase Multi-Flex® TPE A 7150 BLK
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE A 7150 BLK.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The burn rate is 1 in/min (25 mm/min) based on ASTM FM VSS 302. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.83 g/cc | 0.0661 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.012 cm/cm | 0.012 in/in | ASTM D955 |
| Melt Flow | 5.0 - 22 g/10 min | 5.0 - 22 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 89 | 89 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | >= 4.80 MPa | >= 696 psi | ASTM D412 |
| Elongation at Break | >= 400 % | >= 400 % | ASTM D412 |
| Flexural Modulus | 0.170 GPa | 24.7 ksi | method 1, Proc.B; ASTM D-790 |
| Tear Strength | >= 30.0 kN/m | >= 171 pli | ASTM D624 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved