Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Flow = 5.0 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Melt Flow 5.0 g/10 min
5.0 g/10 min
(Condition L) ASTM D-1238-94a
Multibase Multi-Pro® 2005 M 20% Mica Filled Polypropylene
Multi-Pro 2005 M is a mica reinforced polypropylene compound with high stiffness and flex strength. Its high heat resistance lends itself to replace engineered plastics at moderate cost.Data provid..
Melt Flow 5.0 g/10 min

@Load 0.325 kg,
Temperature 270 °C
5.0 g/10 min

@Load 0.716 lb,
Temperature 518 °F
Plastcom SLOVAMID 6 GF 65 PA6, 65% glass fibre
FeaturesPA 6 for injection moulding, chemically strengthened with 65% of glass fibre, for mouldings with high strength and toughness used in the automotive, electrical, engineering and consumer-good..
Melt Flow 5.0 g/10 min

@Load 0.325 kg,
Temperature 270 °C
5.0 g/10 min

@Load 0.716 lb,
Temperature 518 °F
Plastcom SLOVAMID 6 NG1 GF 20 HLS PA6, 20% glass fibre, combined stability
FeaturesPA 6 for injection moulding, chemically strengthened with 20% glass fibre, heat and wheather stabilized. Stabilized against hydrolisys. Good surface finisch. Scratch resistent.Packaging, tra..
Melt Flow 5.0 g/10 min

@Load 0.325 kg,
Temperature 270 °C
5.0 g/10 min

@Load 0.716 lb,
Temperature 518 °F
Plastcom SLOVASTER® B GF 6 FRL 4 PBT, 6% glass fibre, flame retarder
FeaturesPBT with the content of 6 % chemically bound glass fibre and with the flame retardant on the basis of bromine hydrocarbons. Anisotropy of shrinkage enables the injection moulding of round, c..
Melt Flow 5.0 - 15 g/10 min

@Load 2.16 kg,
Temperature 210 °C
5.0 - 15 g/10 min

@Load 4.76 lb,
Temperature 410 °F
ASTM D1238
NatureWorks® Ingeo™ 7032D Stretch Blow Molding/Bottle Grade PLA
NatureWorks® PLA polymer 7032D is a bottles grade resin designed for injection stretch blow molded applications where heat setting is needed. PLA polymer 7032D can be run on conventional ISBM equip..
Melt Flow 5.0 - 12 g/10 min

@Load 1.20 kg,
Temperature 300 °C
5.0 - 12 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D1238
Polymer Resources PC-G10-IM Polycarbonate, 10% Glass Reinforced, Impact Modified
Polycarbonate, 10% Glass Reinforced, Impact ModifiedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information ..
Melt Flow 5.0 - 22 g/10 min

@Load 6.70 kg,
Temperature 337 °C
5.0 - 22 g/10 min

@Load 14.8 lb,
Temperature 639 °F
ASTM D1238
Polymer Resources PEI-G30 Polyetherimide, 30% Glass Reinforced
Polyetherimide, 30% Glass ReinforcedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by Poly..
Melt Flow 5.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
5.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ISO 1133
DuPont Performance Polymers Hytrel® 3078FG TPC-ET  (Unverified Data**)
Hytrel® 3078FG is a high performance thermoplastic elastomer with food compliance specificity.Information provided by DuPont Performance Polymers
Melt Flow 5.0 g/10 min

@Load 5.00 kg,
Temperature 200 °C
5.0 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM D1238
GRECO ISOPAK 547SHF ABS Resin
High Impact and High Flow GradeInformation provided by Greater Eastern Resins Industrial Co., Ltd.
Melt Flow 5.0 g/10 min

@Load 2.16 kg,
Temperature 230 °C
5.0 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
Multibase Multi-Flex® G 7150 TPE Styrene Ethylene Butylene Styrene Block Copolymer
Features: Chemical Resistance, Good Noise DampingOzone Resistant Thermal Stability, Good Forms:PelletsProcessing Method:Injection MoldingBlow MoldingExtrusion Uses: Automotive ApplicationsInforma..
Melt Flow 5.0 g/10 min

@Load 5.00 kg,
Temperature 200 °C
5.0 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM D1238
Lavergne VYTEEN ABS 2901 Acrylonitrile Butadiene Styrene
Vyteen ABS 2901 is a black recycled general purpose ABS terpolymer with balanced impact/stiffness properties designed for injection molding applications.Features: -Good resilience -Good processabi..
Melt Flow 5.0 g/10 min

@Load 5.00 kg,
Temperature 200 °C
5.0 g/10 min

@Load 11.0 lb,
Temperature 392 °F
ASTM D1238
Kostat E-3007J Conductive PS Compound
KOSTAT E-3007J is a conductive thermoplastic compound based on impact modified polystyrene and a special conductive carbon black.KOSTAT E-3007J is not dependant on atmospheric conditions.Special Fea..
Melt Flow 5.0 g/10 min

@Load 2.16 kg,
Temperature 230 °C
5.0 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
Ineos N05U-00 Polypropylene Impact Copolymer
This is an extrusion-grade nucleated impact copolymer polypropylene resin designed for fiber optic buffer tube applications in the protection of glass fibers. It also has an excellent impact/stiffn..
Melt Flow 5.0 g/10 min

@Load 3.80 kg,
Temperature 230 °C
5.0 g/10 min

@Load 8.38 lb,
Temperature 446 °F
ASTM D1238
Star Plastics ABS450FR Molding Grade ABS
Information provided by Star Plastics, Inc.
Melt Flow 5.0 g/10 min
5.0 g/10 min
ASTM D1238
A. Schulman POLYFORT™ PP 3702 Clarified Copolymer Polypropylene
DescriptionPolyfort® PP 3702 is a clarified copolymer polypropylene.Information provided by A. Schulman.
Melt Flow 5.0 g/10 min
5.0 g/10 min
ASTM D1238
A. Schulman PP 3486-01 Polypropylene Homopolymer Polypropylene
DescriptionPolypropylene PP 3486-01 is a special homopolymer polypropylene designed with long term heat aging formula for appliance application.ApplicationThis product is for injection molded applic..
Melt Flow 5.0 - 10 g/10 min

@Temperature 230 °C
5.0 - 10 g/10 min

@Temperature 446 °F
Condition L; ASTM D1238
A. Schulman POLYFORT™ FPP 1285 Glass Fiber-Reinforced Copolymer Polypropylene
DescriptionPolyfort® FPP1285 is a 20% glass fiber-reinforced copolymer polypropylene.Information provided by A. Schulman.
Melt Flow 5.0 g/10 min

@Temperature 230 °C
5.0 g/10 min

@Temperature 446 °F
I<sub>2</sub>; ASTM D1238
Formosa Plastics Formolene® 5144L Homopolymer Polypropylene
Homopolymer for Injection Molded Applications requiring Heat Resistance Formolene® 5144L is a highly isotactic, nucleated polypropylene homopolymer designed for consumer products and appliance appl..
Melt Flow 5.0 g/10 min
5.0 g/10 min
Toyobo GLAMIDE® T-663G50A MXD66
GLAMIDE® is very tough and exhibits high abrasion resistance. It has a high melting point and heat resistance, has well-balanced proportions of mechanical properties, performs self-distinguishing a..
Melt Flow 5.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
5.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
A. Schulman POLYBATCH™ Silver Metallic 70153 Concentrate Based In LDPE
DescriptionPOLYBATCH® 70153 is a silver metallic color concentrate based in LDPE. This concentrate was designed to provide opacity and color in polyolefin film and molding applications. POLYBATC..
Melt Flow 5.0 g/10 min

@Load 1.20 kg,
Temperature 300 °C
5.0 g/10 min

@Load 2.65 lb,
Temperature 572 °F
ASTM D 1238
Cossa Polimeri ESTACARB 0400 OPALE Polycarbonate
Polycarbonate for injection or extrusionOpal, light diffusiveInformation provided by Cossa Polimeri S.r.l.
Melt Flow 5.0 g/10 min

@Load 5.00 kg,
Temperature 260 °C
5.0 g/10 min

@Load 11.0 lb,
Temperature 500 °F
Covestro Bayblend® KU 2-1500 Polycarbonate/ABS Blend
Flame retardant extrusion grade.Applications: Bulky parts for DT-copying machines.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and official..
Melt Flow 5.0 g/10 min

@Load 2.16 kg,
Temperature 230 °C
5.0 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
ExxonMobil PP1222F Mineral-filled Homopolymer
Medium melt flow rate homopolymer, 20% filled. Particularly suitable for consumer products and appliance applications requiring long term heat aging resistance. UL continuous service rating of 95°..
Melt Flow 5.0 - 10 g/10 min

@Load 5.00 kg,
Temperature 230 °C
5.0 - 10 g/10 min

@Load 11.0 lb,
Temperature 446 °F
ISO 1133
Eurostar Starpylen MZ006S PP, Glass Fiber Filled, Injection Molded
Starpylen MZ006S is a Glass fiber Reinforced, Polypropylene Injection Molding Resin heat stabilized (also known as Starpylen WT 30GF S3)Information provided by Eurostar.
Melt Flow 5.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
5.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM-D1238
Braskem IA59U3 HDPE Injection Molding Polyethylene Homopolymer
IA59U3 is a high-density polyethylene, narrow molecular weight homopolymer produced by the solution process for injection molding applications. It offers high stiffness and impact strength combined ..
Melt Flow 5.0 g/10 min

@Load 3.80 kg,
Temperature 230 °C
5.0 g/10 min

@Load 8.38 lb,
Temperature 446 °F
ASTM D1238
Buckeye Polymers BP REPLEX 0805 R BLK ABS Polymer
Product Information: Our BP REPLEX 0805 R BLK offers better than average impact while providing good melt flow characteristics in an affordably priced material.Product Features:Good impact and melt ..
Melt Flow 5.0 g/10 min
5.0 g/10 min
ASTM D1238
Asahi Kasei Thermylene® P6-30FG-0709 30% Fiber Glass Reinforced, Heat Stabilized
Information provided by Asahi Thermofil
Melt Flow 5.0 - 10 g/10 min
5.0 - 10 g/10 min
ASTM D1238
Aaron Industries AAROPRENE® GFABS 4020 Glass Filled Acrylonitrile-Butadiene Styrene
AAROPRENE® GFABS 4000 Series Reinforced CompoundsMelt flow index may be specified. Color may be specified.
Melt Flow 5.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
5.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
ExxonMobil Escorene® HD-8760 HDPE, Rotational Molding Pellets  (discontinued **)
Data Provided by Exxon Chemical Canada.Characteristics: Fully formulated UV-8 type protection, Higher stiffness, Good flowUses: Recreational products, Industrial components, RV tanks
Melt Flow 5.0 g/10 min

@Load 10.0 kg,
Temperature 220 °C
5.0 g/10 min

@Load 22.0 lb,
Temperature 428 °F
ASTM D1238
LG Chemical LI923 Extrusion ASA
Description: Good Weatherability, High RigidityApplication: Communication Instrument Cover, Cable Connecting Cover, Door PanelCAS: 26299-47-8Information provided by LG Chemical
Copyright © lookpolymers.com All Rights Reserved