Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Density = 1.02 g/cc Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Density 1.02 g/cc
0.0368 lb/in³
Finaprene 2602 Method
Total Finaclear® 530 Clear Impact Polystyrene  (discontinued **)
Finaclear® 530 is a clear high styrenic styrene-butadiene (SBS) elastomer, providing dramatically improved impact properties and tear resistance to finished articles, when used in blends with other..
Density 1.02 g/cc
0.0368 lb/in³
Liquid
KiON CERASET® POLYSILAZANE 20 (PSZ 20)
General DescriptionKiON Ceraset Polysilazane 20 is a liquid polymer that can easily be converted to a solid pre-ceramic and then be pyrolyzed to either silicon carbide or silicon nitride-containing ..
Density 1.02 g/cc
0.0368 lb/in³
ISO 1183
Inno-Comp INNOPOL® CS 3-9120 SR5 17% Talc Filled Polypropylene Blend
INNOPOL® CS 3-9120 SR5 is a 17% talc-filled compound based on blend of polypropylene block copolymer and homopolymer. This grade is available in natural and custom colored form.INNOPOL® CS 3-9..
Density 1.02 g/cc
0.0368 lb/in³
ASTM D792
Multibase Multi-Flamâ„¢ 2602 PP Polypropylene
Features:Flame RetardantHalogenatedBlooming, None Forms:PelletsProcessing Methods:Injection MoldingInformation provided by Multibase
Density 1.02 - 1.13 g/cc
0.0368 - 0.0408 lb/in³
Free flowing, Typical
Solvay Chemicals Soda Solvay® Dense Soda Ash (European Grade)
Soda Ash Dense is the grade preferred for glass manufacture because its granular properties make it dust-free and reduce the risks of segregation during transport and handling.Applications: Glass in..
Density 1.02 g/cc
0.0368 lb/in³
ISO 1183
SABIC Innovative Plastics LNP LUBRILOY R2000A PA 66
LNP LUBRILOY* R2000A is a compound based on Nylon 66 resin containing Proprietary Lubricant. Added feature of this material is: Wear Resistant.
Density 1.02 g/cc
0.0368 lb/in³
ISO 1183
Styrolution Novodur® E401 ABS
Novodur E401 is a high impact extrusion grade with good surface appearanceInformation provided by Styrolution
Density 1.02 g/cc
0.0368 lb/in³
Solvay MIRACARE® BC-20 Surfactant
Description: MIRACARE BC-20 is a concentrated baby shampoo formula which yields a finished product upon dilution. MIRACARE BC-20 retains the traditional ultra-mild shampoo ingredients, while combini..
Density 1.02 g/cc
0.0368 lb/in³
ISO 1183
Borealis Daplen™ EG103AI Polypropylene Compound, Mineral Filled
Daplen™ EG103AI is a 15 % mineral filled polypropylene compound intended for injection molding. This material has an excellent balance between impact strength and stiffness and high melt flow rate..
Density 1.02 g/cc
0.0368 lb/in³
ISO 1183
Polyplastics TOPAS® 6017 Cyclic Olefin Copolymer (COC) (Asia/Pacific Grade)
Possesses the highest heat resistance among cyclic olefin-type resins.Information provided by PolyPlastics.
Density 1.02 g/cc
0.0368 lb/in³
ISO 1183
Polyplastics TOPAS® 8007 Cyclic Olefin Copolymer (COC) (Asia/Pacific Grade)
Water adsorption is small and barrier properties are good, making this grade particularly suitable for package applications for products that dislike moisture. Grade 8007 has lower coefficient of el..
Density 1.02 g/cc
0.0368 lb/in³
DIN 53479
Polyram PlusTek RD104 Nylon 12, Injection Molding
Outstanding flexibility polyamide 12 for injection molding applications.Information provided by Polyram Ram On Ind.
Density 1.02 g/cc
0.0368 lb/in³
ISO 1183
Topas Advanced Polymers TOPAS® 8007D-61 Cyclic Olefin Copolymer (COC)
TOPAS® 8007D-61 is an externally lubricated version of our 8007 series of injection molding resins, targeting injection blow molding (IBM) and injection stretch blow molding (ISBM) applications. Li..
Density 1.02 g/cc
0.0368 lb/in³
ISO 1183
Topas Advanced Polymers TOPAS® 8007F-04 Cyclic Olefin Copolymer (COC)
TOPAS® 8007F-04 is a general purpose film extrusion grade. It is a high clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and..
Density 1.02 g/cc
0.0368 lb/in³
GB/1033
Zhejiang Juner JEPPBC001 Weatherability PP Series
Applications: Weatherability ProductsInformation provided by Zhejiang Juner New Materials Co, Ltd.
Density 1.02 g/cc
0.0368 lb/in³
ISO 1183
Borealis Daplen™ ED213AE TPO Compound
Daplen ED213AE is a 20% mineral and elastomer modified polypropylene compound intended for injection molding. Daplen ED213AE is a material with excellent impact/ stiffness ratio. Thanks to its low..
Density 1.02 g/cc
0.0368 lb/in³
ASTM D792
UBE UBESTA® 3035UF Rigid Piping Grade Nylon 12
Description: UBESTA contributes to the field of Utilities such as plastic pipe system evolutionary developed for gas industry. It is used for both burial and for rehabilitation of existing cast iron..
Density 1.02 g/cc

@Temperature 260 °C
0.0368 lb/in³

@Temperature 500 °F
Melt
Covestro Makroblend® DP UT6005 Polycarbonate + PBT, Impact Grade
Developmental product(PC+PBT)-blendimpact modifiedeasy releaseinjection molding grade Makroblend DP UT6005* offers an exceptional low-temperature impact strength, good flowability and excellent ch..
Density 1.02 g/cc
0.0368 lb/in³
Melt
Covestro Makrolon® 3158 Polycarbonate
Key Features:Release agentUnfilledSuitable processing methods:Injection moldingExtrusionBlow moldingInformation provided by Bayer Polymers.As of 1 September 2015, Bayer MaterialScience was separated..
Density 1.02 g/cc
0.0368 lb/in³
ASTM D792
Diamond Polymers Softflex® SF 5560 Overmold for Nylon
Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc.
Density 1.02 g/cc
0.0368 lb/in³
Dow VORANOL™ VORACTIV™ 6340 Catalytically Active Polyether Polyol
VORANOL™ VORACTIV™ 6340 polyether polyol is a catalytically active, high functionality capped polyol. Its high molecular weight, functionality, high primary hydroxyl content, and inherent catalyt..
Density 1.02 g/cc
0.0368 lb/in³
Arkema Group Pebax® 7033 SN 01 Polyether Block Amide (PEBA) (Conditioned)
POLYETHER BLOCK AMIDE (PEBA) hardness 70 shore D Non plasticized flexible Polyamide Outstanding mechanical properties at low temperature (-40°C) Applications: Sport (Football shoe sole, ski top lay..
Density 1.02 - 1.05 g/cc
0.0368 - 0.0379 lb/in³
BASF Styropor® F 215 N Expandable Polystyrene
Description: Expandable polystyrene (EPS) containing a uniformly distributed ?ame retardant (blowing agent: pentane)Remarks: For the manufacture of flame-retardant foams.Applications: Blocks, insula..
Density 1.02 - 1.05 g/cc
0.0368 - 0.0379 lb/in³
BASF Styropor® F 315 T-N Expandable Polystyrene
Use: Expanding-agent containing plastic for the production of foam plasticsInformation provided by BASF
Density 1.02 - 1.05 g/cc
0.0368 - 0.0379 lb/in³
BASF Styropor® P 326 M Expandable Polystyrene
Description: Expandable polystyrene (EPS) (blowing agent: pentane).Remarks: Good foaming capacity, energy-saving processing and short cycle time.Applications: Molded parts with very good mechanical ..
Density 1.02 - 1.06 g/cc
0.0368 - 0.0383 lb/in³
ISO 1183
Austin Novel Materials Texalan® 770A PCL TPU
Description: Good abrasion resistance, tensile strength, oil resistance and heat resistance which can be used in mechanic parts and various industry parts.Information from Dawnentech
Density 1.02 - 1.05 g/cc
0.0368 - 0.0379 lb/in³
ASTM D 792
API Megol AM SV/P SEBS Adhesion Modified Overmolding for Polar Polymers
Over-molding allows for the creation of composite finished products in a single phase, removing the need for successive gluing or mechanical fixing steps. This also reduces environmental impact as ..
Density 1.02 - 1.05 g/cc
0.0368 - 0.0379 lb/in³
BASF Peripor® 300 Expandable Polystyrene
Description: Expandable polystyrene (EPS) with uniformly distributed flame retardant (blowing agent: pentane)Remarks: Low-pentane products for the production of flame-retardant foams displaying low ..
Density 1.02 g/cc
0.0368 lb/in³
ASTM D792
Ashley Polymers Ashlene® D925 Nylon 12
A flexible Nylon 12 with exceptional toughness, excellent abrasion and chemical resistance, outstanding low temperature performance, dimensional stability and low moisture absorption. Also availabl..
Density 1.02 g/cc
0.0368 lb/in³
ASTM D792
Ashley Polymers Ashlene® L925 Nylon 12
A flexible Nylon 12 with exceptional toughness, excellent abrasion and chemical resistance, outstanding low temperature performance, dimensional stability and low moisture absorption. The natural c..
Copyright © lookpolymers.com All Rights Reserved