Polymer Property : Linear Mold Shrinkage = 0.011 cm/cm Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Linear Mold Shrinkage	0.011 cm/cm	0.011 in/in	ASTM D955
Multibase Multi-Flex® TPE A 7101 BLK Ash is 36.2%. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
Linear Mold Shrinkage	0.011 cm/cm	0.011 in/in	STN EN ISO 294-4
Plastcom SLOVAMID® 6 GF 40 HI PA6 reinforced with glass fiber, improved impact strength PA 6 for injection molding, reinforced with 40% glass fiber, impact modified. Application: impacted moldings and moldings with higher strength applied in automotive, electrical, engineering and cons..
Linear Mold Shrinkage	0.011 - 0.013 cm/cm	0.011 - 0.013 in/in	With Flow; ISO 2577
Polykemi AB POLYelast TPE ZC100 D40 Thermoplastic Elastomer Information provided by Polykemi AB
Linear Mold Shrinkage	0.011 - 0.013 cm/cm	0.011 - 0.013 in/in	Across Flow; ISO 2577
Polykemi AB POLYfill PP CIQ15020 Polypropylene, Mineral Reinforced Information provided by Polykemi AB
Linear Mold Shrinkage	0.011 - 0.013 cm/cm	0.011 - 0.013 in/in	With Flow; ISO 2577
Polykemi AB POLYfill PP HBK15030 D Polypropylene, Multifiller High Gloss, Detergent Resistant Information provided by Polykemi AB
Linear Mold Shrinkage	0.011 - 0.013 cm/cm	0.011 - 0.013 in/in	Across Flow; ISO 2577
Polykemi AB POLYfill PPH K20020 D Polypropylene Homopolymer, Mineral Reinforced, Detergent Resistant Information provided by Polykemi AB
Linear Mold Shrinkage	0.011 - 0.013 cm/cm	0.011 - 0.013 in/in	With Flow; ISO 2577
Polykemi AB POLYfill PPH TS2020 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB
Linear Mold Shrinkage	0.011 cm/cm	0.011 in/in	Across Flow; ISO 2577
Polykemi AB SCANAMID 66 A12^ F30 Nylon 66, Glass Fiber Reinforced Information provided by Polykemi AB
Linear Mold Shrinkage	0.011 - 0.015 cm/cm	0.011 - 0.015 in/in	ASTM D955
Polymer Resources NY6-GP1-[color]-H General Purpose Nylon 6, Heat Stabilized General Purpose Nylon 6, Heat Stabilized, LubricatedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Nylon grade..
Linear Mold Shrinkage	0.011 - 0.012 cm/cm	0.011 - 0.012 in/in	ASTM D955
Kolon KOPELÂ® KP3355 General Purpose TPE Resin KOPELÂ® is a thermoplastic polyester elastomer which is a new engineering rubber having combined properties of conventional rubber and thermoplastic. Its flexibility and elastic recovery are very..
Linear Mold Shrinkage	0.011 - 0.013 cm/cm	0.011 - 0.013 in/in	ASTM D1299
Loxim 830 02T HB Polypropylene Compound, 30% Talc Filled, Flame Retardant Information provided by Loxim Industries
Linear Mold Shrinkage	0.011 cm/cm	0.011 in/in	ISO Method 2577
LyondellBasell Astryn BB73F Polypropylene Copolymer, Mineral Filled Key Features: high melt flow, high modulus, UV-stabilized, mineral-filled, high rigidity, good impact strength, good dimensional stability, good scratch and mar resistance, excellent processability,..
Linear Mold Shrinkage	0.011 cm/cm	0.011 in/in	Tool, Montell
LyondellBasell Astryn BB77G Polypropylene Copolymer, 15% Talc Key Features: high melt flow, high modulus, UV-stabilized, mineral-filled polypropylene copolymer, good impact stiffness and balance, good dimensional stability, good colorability, good aesthetics, ..
Linear Mold Shrinkage	0.011 cm/cm	0.011 in/in	Isotropy
Solvay TECHNYLÂ® B 50 H1 PA66/6, DRY Description: TECHNYLÂ® B 50H1 is an unreinforced melamine cyanurate flame retarded copolyamide 66/6. This product has been heat stabilized and is suitable for injection molding. This product is av..
Linear Mold Shrinkage	0.011 cm/cm	0.011 in/in	24 hours; ASTM D955
Teknor Apex TELCAR® 1000-92UV Thermoplastic Elastomer Information provided by Teknor Apex Company
Linear Mold Shrinkage	0.011 cm/cm	0.011 in/in	ASTM D955
Teknor Apex Telcar® TL-1000-92 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Automotive Spec..
Linear Mold Shrinkage	0.011 - 0.018 cm/cm	0.011 - 0.018 in/in
Polyram PlusTek PA602 Nylon 6.6, Heat Stabilized Heat stabilized polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind.
Linear Mold Shrinkage	0.011 cm/cm @Thickness 3.175 mm	0.011 in/in @Thickness 0.1250 in	ASTM D955
A. Schulman SCHULAMID® 6 GB30 30% Glass Bead Reinforced Nylon 6 Information provided by A. Schulman.
Linear Mold Shrinkage	0.011 cm/cm	0.011 in/in	MD; ASTM D955
Aclo Accutech Polypropylene Copolymer CP0436W10L Wollastonite Reinforced
Linear Mold Shrinkage	0.011 cm/cm	0.011 in/in	MD; ASTM D955
Aclo Accutech Polypropylene Copolymer CP0436W10L1 Wollastonite Reinforced
Linear Mold Shrinkage	0.011 cm/cm	0.011 in/in	MD; ASTM D955
Aclo Accutech Polypropylene Homopolymer HP0339C40L1 Calcium Reinforced
Linear Mold Shrinkage	0.011 - 0.014 cm/cm	0.011 - 0.014 in/in	ASTM D955
Asahi Kasei Xyron® A0210 PPE/PA AutomotiveInformation provided by Asahi Kasei
Linear Mold Shrinkage	0.011 cm/cm	0.011 in/in	ASTM D955
A. Schulman ComAlloy Comtuf® 101 Polypropylene, Mineral Reinforced, Impact Modified Data provided by the manufacturer, ComAlloy International Company.25% Mineral Reinforced. Superior toughness and impact resistance characterize Comtuf® materialsThe ComAlloy product line has been i..
Linear Mold Shrinkage	0.011 - 0.018 cm/cm	0.011 - 0.018 in/in	ASTM D955
Asia International Enterprise (Hong Kong) 3010FW Polybutylene terephthalate Information provided by Asia International Enterprise (Hong Kong) Ltd.
Linear Mold Shrinkage	0.011 - 0.013 cm/cm	0.011 - 0.013 in/in	With Flow; ISO 2577
Polykemi AB POLYfill PPH TS3020 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB
Linear Mold Shrinkage	0.011 - 0.013 cm/cm	0.011 - 0.013 in/in	Across Flow; ISO 2577
Polykemi AB POLYfill PPHC K8030 Polypropylene, Mineral Reinforced Information provided by Polykemi AB
Linear Mold Shrinkage	0.011 cm/cm	0.011 in/in	ASTM D955
Tipco Tipcolene® HR 7222 - 25% Talc/Mineral Reinforced, Impact Modified Polypropylene Copolymer Compound 25% Mineral Reinforced, Impact Modified PP Copolymer BlendApplications: Automotive InteriorsProcessing: Injection MoldingInformation provided by the Manufacturer, Tipco Industries Ltd., India.
Linear Mold Shrinkage	0.011 cm/cm @Thickness 3.17 mm	0.011 in/in @Thickness 0.125 in
Shakespeare Isocor™ HW29TL Nylon 610 Isocor™ HW29TL is an ultra low viscosity PA-610 with excellent melt flow characteristics. Isocor™ HW29TL is specifically formulated for thin wall or high speed injection molding applications. ..
Linear Mold Shrinkage	0.011 - 0.013 cm/cm	0.011 - 0.013 in/in	as molded; ISO 294
LyondellBasell INDURE™ X210 TPO Description: INDURE™ X210 engineered polyolefin material is designed for large automotive exterior applications that require ductile impact properties at low temperatures, and processability. Appli..