Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
S&E Specialty Polymers TufFlex™ GA-509-80-5 TPE Compound Application: A Matte Finish, Flexible, Sunlight Resistant, 105?C Jacketing Compound with 60?C Oil Resistance.Information provided by S&E Specialty Polymers |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
Ovation Polymers Opnyl OP6GF33 Nylon 6, 33% Glass Reinforced, Conditioned Nylon 6 - Glass reinforced (33 %), high tensile strength, stiffness and HDT. *All properties are measured after 48 hours of conditioning at 23°C and 50% relative humidity. For Nylon compounds the m.. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
PolyOne Geon™ 170 Series 4195 Polyvinyl Chloride Homopolymer (PVC Homopolymer) Geon® 171 is an ultra-high molecular weight, fine particle size homopolymer dispersion resin intended for use in thin, organosol cast coatings and films. This resin provides excellent fused film an.. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
PolyOne Geon™ 170 Series Adept E 49 Polyvinyl Chloride Homopolymer (PVC Homopolymer) Geon® Adept E49 is a low molecular weight homopolymer dispersion resins intended for use in variety of plastisol applications and processes. It reduces scrap rates and manufacturing costs by extend.. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
PolyOne Geon™ 170 Series L100UF Polyvinyl Chloride Homopolymer (PVC Homopolymer) Geon® Ultrafine 170-L100UF is a medium molecular weight, ultrafine particle size homopolymer dispersion resin. With the very fine particle size, it provides excellent casting characteristics for th.. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
PolyOne Geon™ 170 Series L140UF Polyvinyl Chloride Homopolymer (PVC Homopolymer) Geon® Ultrafine 170-L140UF is an ultra high molecular weight, ultrafine particle size homopolymer dispersion resin. The excellent dispersibility provides good product throughput during the organoso.. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
PolyOne Geon™ FIT E 51 Polyvinyl Chloride Homopolymer (PVC Homopolymer) Geon® FIT E 51 is a medium molecular weight homopolymer resin intended for use as a Formulation Improvement Tool (FIT) in plastisol formulations which enhance the plastisol usage (pot life) and red.. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
PolyOne Geon™ Specialty Suspension Atlas E 46 Polyvinyl Chloride Homopolymer (PVC Homopolymer) Geon® Atlas E 46 is high molecular weight homopolymer specialty suspension resin intended for use in high strength extruded parts. It improves the physical performance of end application for instan.. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
Ravago Manufacturing Americas Enviramid™ N2335HL BK Post Consumer Recycle Nylon 6, 35% Glass Filled Heat Stabilized, Lubricated, Black and made from EnViramid™ Post Consumer Recycled NylonInformation provided by Ravago. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | Method A; ASTM D792 |
LNP Thermocomp® STN-F-1006 HS Polyamide 46, Glass Fiber Reinforcement
(discontinued **) Features: Heat StabilizedForms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades are sti.. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
PolyOne Edgetek® SF-20CF/000 Polyphenylene Sulfide (PPS)
(discontinued **) The Edgetek® Engineering Thermoplastic Compounds portfolio covers a broad range of standard and custom-formulated high performance materials. This portfolio includes high-temperature materials for .. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ISO 1183 |
Lehmann & Voss LUVOCOM® 1106/XCF/30 Polyether imide, with carbon fiber, easy flowing Applications: High-strength and high-stiff parts; low coefficient of expansion.High continuous use and heat distortion temperature. Non flammable.Electrically conductive, suitable for continuous dis.. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D790 |
LG Chemical LS100 PVC General Description: LS100 is a general-purpose product used for soft and hard products and is most widely used in PVC grade.Main Applications: Pipe, power cable jacket, leather, sheets, hoses, soft.. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
Metabolix Mirel™ F1005 Injection Molding Grade PHA Bioplastic Mirel F1005 is FDA cleared for use in non-alcoholic food contact applications, from frozen food storage and microwave reheating to boiling water up to 212°F. FDA clearance includes products such.. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
Metabolix Mirelâ„¢ P4001 Sheet Extrusion Grade Bioplastic Mirelâ„¢ P4001 is a general purpose, high melt strength material suitable for cast sheet extrusion. Mirelâ„¢ P4001 is designed for a wide range of sheet applications including gift cards, prom.. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ISO 1183 |
Gromax CFG35-R113N1 Nylon 6 36% Glass Filled (Dry) Information provided by Gromax Enterprises Corp. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | |
Sylvin Technologies 8980-65 Natural PVC Extrusion Compound Information provided by Sylvin Technologies Inc. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
Samsung Cheil Industries Infino® AR-9301 PA, Glass Filled General Purpose Information provided by Samsung Cheil Industries. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
SABIC Innovative Plastics NORYL GFN1740V PPE+PS Noryl* GFN1740V Polyphenylene Oxide (PPO) + Polystyrene (PS) resin is a 40 % Glass Reinforced, injection moldable grade with improved hydrolytic stability and with a Tensile Modulus > 11000 MPa; thi.. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
SABIC Innovative Plastics NORYL NF1030 PPE+PS (Asia Pacific) |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
Teknor Apex APEX® 80459 Polyvinyl Chloride, Flexible Notes: 105°C Jacket; RoHS Compliant Uses: Wire and Cable ApplicationsForms: PelletsInformation Provided by Teknor Apex |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
A. Schulman SCHULAMID® 66 GF33 33% Glass Fiber Reinforced Nylon 66 Information provided by A. Schulman. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | DIN 53 479 |
Hippe PAI Polyamide-imide Particularly used where high strength in a wide range of temperature (-190°C…+260°C), high notched strength and very good dielectric properties are required. Features good chemical stability, fl.. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ASTM D792 |
Clariant PA621G30 Nylon 612, 30% Glass Fiber, Impact Modified Data provided by Clariant Masterbatches |
|||
Specific Gravity | 1.40 - 1.44 g/cc | 1.40 - 1.44 g/cc | ASTM D-792 |
Axiall 8923 Moldings & Extrusions Flexible PVC Non-lead stabilized, migration resistant gasket compound.Information provided by Georgia GulfGeorgia Gulf became Axiall Corporation in 2013. |
|||
Specific Gravity | 1.40 g/cc | 1.40 g/cc | ISO 1183 |
Azoty Tarnow™ Tarnamid® T-27 GF35 Polyamide 6 - Glass Fiber Reinforced 35% Glass fiber reinforced, medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Tarnamid® has the following main properties:High.. |