- HOME
- POLYMER SEARCH
- Polymer Property : Tensile Strength at Break = 4930 psi
Polymer Property : Tensile Strength at Break = 4930 psi Product List
Mechanical PropertiesTips: 30 items are displayed at most.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 34.0 MPa | 4930 psi | |
|
Plastcom SLOVALEN PH 91 N PP, basic type
FeaturesCompounded homopolymer PP. General use in all industry branches. Packing material, garden flower-pots, toys, furniture industry, guides, dowels, clamps, office chairs, holders etc. Delivered..
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | |
|
Plastcom SLOVALEN PH 92 T 40 PP, 40% mineral filling
FeaturesModified homopolymer PP for injection moulding with the content of 40% microground, floated, chemically modified talc. Stable towards oxidants. General application in all industry branches -..
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | Type I, 5 mm/min; ASTM D638 |
|
SABIC Innovative Plastics Cycolac® MG38N ABS (Asia Pacific)
Very high impact ABS. Toughness/rigidity. Good fatigue resistance. NSF Standard 61 certified in limited colors (restrictions may apply)>
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | Type I, 5 mm/min; ASTM D638 |
|
SABIC Innovative Plastics Cycolac® MG47N ABS (Asia Pacific)
Multi-purpose, injection molding ABS providing a favorable balance of engineering properties. NSF Standard Multi-purpose, injection molding ABS providing a favorable balance of engineering properti..
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | Type I, 5 mm/min; ASTM D 638 |
|
SABIC Innovative Plastics Cycolac® MG8000SR ABS
This data was supplied by SABIC-IP for the Americas region.
|
|||
| Tensile Strength at Break | <= 34.0 MPa | <= 4930 psi | ISO/R527 |
|
Polykemi AB POLYabs S00 GK10 ABS, High Flow
Information provided by Polykemi AB
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | 50 mm/min; ISO 527 |
|
SABIC Innovative Plastics Geloy XTWM200 ASA
ASA resin for injection molding. Excellent flow, colorability and outdoor weathering capability.This data was supplied by SABIC-IP for the Americas region.
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | 50 mm/min; ISO 527 |
|
SABIC Innovative Plastics Geloy XTWM200 ASA (Asia Pacific)
ASA resin for injection molding. Excellent flow, colorability and outdoor weathering capability.This data was supplied by SABIC-IP for the Asia Pacific region.
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | 50 mm/min; ISO 527 |
|
SABIC Innovative Plastics Geloy XTWM200 ASA (Europe-Africa-Middle East)
ASA resin for injection molding. Excellent flow, colorability and outdoor weathering capability.This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
|
|||
| Tensile Strength at Break | <= 34.0 MPa | <= 4930 psi | ISO/R527 |
|
Polykemi AB POLYfill PPH T15020 Polypropylene Homopolymer, Mineral Reinforced
Information provided by Polykemi AB
|
|||
| Tensile Strength at Break | <= 34.0 MPa | <= 4930 psi | ISO/R527 |
|
Polykemi AB POLYfill PPH T20020 UV Polypropylene Homopolymer, Mineral Reinforced, UV-Stabilized
Information provided by Polykemi AB
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | ASTM D4895 |
|
3M Dyneon™ TFM™ 2001 Modified PTFE Paste Extrusion Powder
(discontinued **)
Type I, gr. 2 PTFE. Free flowing powder. Minimum reduction ratio is 20; Max is 1000. Average particle size 500µm.Modified PTFE fine powder product for paste extrusion applications. The modified ..
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | 50 mm/min; ISO 527-1,-2 |
|
Ineos ABS Lustran® ABS 450 Injection Molding Grade
Lustran® ABS 450 has medium impact strength, high flow, and is injection molding grade.
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | 5 mm/min; ISO 527 |
|
SABIC Innovative Plastics LNP LUBRICOMP DL003EXJ PC
LNP* Lubricomp* DL003EXJ is a compound based on Polycarbonate containing 15% PTFE. Characteristics of this grade are Easy Molding, Low Extractable, Internally Lubricated, Healthcare.
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | 5 mm/min; ISO 527 |
|
SABIC Innovative Plastics LNP LUBRICOMP DZL24 PC
LNP LUBRICOMP* DZL24 is a compound based on Polycarbonate resin containing 20% Milled Glass, 10% PTFE. Added features of this material include: Internally Lubricated.
|
|||
| Tensile Strength at Break |
34.0
-
40.0
MPa @Thickness 2.00 mm |
4930
-
5800
psi @Thickness 0.0787 in |
50 mm/min; ASTM D638 |
|
Solvay Specialty Polymers Solef® 60512 Polyvinylidene Fluoride (PVDF)
Solef® 60512 PVDF copolymer has high viscosity of the melt and it is a grade for offshore piping.Features: Copolymer; High ViscosityUses: PipingAdditional Properties: Crystallization Heat - ASTM ..
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | ASTM D638 |
|
SABIC Innovative Plastics LNP THERMOCOMP AB002 ABS (Asia Pacific)
LNP* Thermocomp* AB002 is a compound based on Acrylonitrile Butadiene Styrene resin containing Glass Bead.
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | Type I, 5 mm/min; ASTM D638 |
|
SABIC Innovative Plastics LNP THERMOCOMP MF002AS PP
LNP THERMOCOMP* MF002AS is a compound based on Polypropylene resin containing 10% Glass Fiber. Added features of this material include: Heat Stabilized.
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | Crosshead speed 100 mm/min; ISO 527 |
|
SCG Chemicals EL-Leneâ„¢ H5211P High Density Polyethylene Pipe Resin
Key Characteristics: Good processing, high thermal stabilityRecommended Applications: Water pipes, conduit, sewage drainage pipesInformation provided by SCG Chemicals
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | 67% Ret. |
|
UBE UBESTA® 3030U Nylon 12 (After Ethanol for 1000 hours)
Description: UBESTA has a strong resistance to chemicals. Under normal conditions, it is not significantly affected by alkalis, alcohols, ethers, ketones, hydrocarbons, lubricating oils, gasoline, c..
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | 67% Ret. |
|
UBE UBESTA® 3030U Nylon 12 (After Chloroform for 1000 hours)
Description: UBESTA has a strong resistance to chemicals. Under normal conditions, it is not significantly affected by alkalis, alcohols, ethers, ketones, hydrocarbons, lubricating oils, gasoline, c..
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | 50mm/min; ISO 527-2 |
|
Denka TH-23 Transparent Resin Polymer (MBS resin) Polymethacrylate Butadiene Styrene
"TX Polymer" (methyl methacrylate styrene), MS resins as an alternative to acrylic resins, with low density, low moisture absorption, and good moldability, "TH Polymer/TP Polymer," MBS resins with a..
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | 50 mm/min; ISO 527 |
|
Chi Mei Polylac® PA-756H ABS - High Flow
Super high flow
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | ASTM-D638 |
|
Braskem GM5010T2 HDPE High Density Extrusion Polyethylene
GM5010T2 is a high-density polyethylene compound specially developed for the manufacturing of extruded pipes. It is produced with bimodal technology and has high molar mass. It shows high mechanical..
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | |
|
AorTech Biomaterials Elast-Eon™ E2-862 Biomedical Polyurethane Pellets
Elast-Eon™ polymers are used in biomedical applications. They have high biostability so they can be used for long term implantation.
|
|||
| Tensile Strength at Break | 34.0 - 55.0 MPa | 4930 - 7980 psi | ASTM D638 |
|
Arkema Group KYNAR® 710, 710 HDP Polyvinylidene Fluoride Homopolymer- Injection Molding
Characteristics: Natural resin - translucent, off-white hemispheres. HDP indicates higher color stability. High stability in harsh thermal, chemical and ultraviolet environments. High toughness ..
|
|||
| Tensile Strength at Break | 34.0 - 55.0 MPa | 4930 - 7980 psi | ASTM D638 |
|
Arkema Group KYNAR® 740 Polyvinylidene Fluoride Homopolymer - Injection Molding and Extrusion
Characteristics: Natural resin - translucent, off-white hemispheres. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechanical strength, low permeabili..
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | ASTM D1457 |
|
Asahi Glass Fluon® CD090 PTFE Coagulated Dispersion Powder
Fluon®PTFE coagulated dispersion powders (fine powders) are used for paste extrusion to make tapes, tubes, rods and wire coatings.Information provided by Asahi Glass Company, Inc.
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | ASTM D1457 |
|
Asahi Glass Fluon® CD1 PTFE Coagulated Dispersion Powder
Fluon®PTFE coagulated dispersion powders (fine powders) are used for paste extrusion to make tapes, tubes, rods and wire coatings.Information provided by Asahi Glass Company, Inc.
|
|||
| Tensile Strength at Break | 34.0 MPa | 4930 psi | ISO 527-1/-2 |
|
Lanxess Pocan® S 7020 000000 PBT
PBT, non-reinforced, injection molding, extrusion, flame retardant, impact modified
|
|||
Copyright © lookpolymers.com All Rights Reserved