Polymer Property : Tensile Strength at Break = 9.00 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	9.00 - 13.0 MPa	1310 - 1890 psi	ASTM D412
Proto3000 Objet Digital Materials™ DM_9610 Rubber-like Prototyping Polymer Primary material: TangoGraySecondary material: VeroBlackDigital Materials are made up of two Objet materials. The two materials are combined in specific concentrations and structures, to provide the..
Tensile Strength at Break	9.00 MPa	1310 psi	Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics NORYL WCD933 PPE-TPE Flexible and non-halogenated flame retardant extrusion grade intended for evaluation in applications such as insulation of HD 21.14 flexible cables. Flame retardant performance capable of meeting EN..
Tensile Strength at Break	9.00 MPa	1310 psi	50 mm/min; ISO 527
SABIC Innovative Plastics NORYL WCP921A PPE-TPE Flexible Noryl* injection molding grade. Low specific gravity with good non-halogenated flame retardant performance. Developed for overmolding applications such as plugs, strain reliefs, and connect..
Tensile Strength at Break	9.00 MPa	1310 psi	Type I, 50 mm/min; ASTM D638
SABIC Innovative Plastics NORYL WCP921A PPE-TPE (Europe-Africa-Middle East) Flexible Noryl* injection molding grade. Low specific gravity with good non-halogenated flame retardant performance. Developed for overmolding applications such as plugs, strain reliefs, and connect..
Tensile Strength at Break	9.00 MPa	1310 psi	50 mm/min; ISO 527
SABIC Innovative Plastics NORYL WCP921A PPE-TPE (Europe-Africa-Middle East) Flexible Noryl* injection molding grade. Low specific gravity with good non-halogenated flame retardant performance. Developed for overmolding applications such as plugs, strain reliefs, and connect..
Tensile Strength at Break	>= 9.00 MPa @Temperature 275 Â°C, Time 86400 sec	>= 1310 psi @Temperature 527 Â°F, Time 24.0 hour
Shandong Dongyue Shenzhou New Material Co DS2601 Fluoroelastomer Copolymer Gum Conformable with: Q/DYS 005-2007Brief Introduction:FKM-DS2600 is copolymer of HFP and VDF. Normally it is white or light yellow translucent elastomer whose fluorine content is over 66%. After vulc..
Tensile Strength at Break	>= 9.00 MPa @Temperature 275 Â°C, Time 86400 sec	>= 1310 psi @Temperature 527 Â°F, Time 24.0 hour
Shandong Dongyue Shenzhou New Material Co DS2602 Fluoroelastomer Copolymer Gum Conformable with: Q/DYS 005-2007Brief Introduction:FKM-DS2600 is copolymer of HFP and VDF. Normally it is white or light yellow translucent elastomer whose fluorine content is over 66%. After vulc..
Tensile Strength at Break	9.00 MPa	1310 psi	500mm/min; ASTM D638 Type IV Specimen
Westlake EC1390AA Low Density Polyethylene WESTLAKE low-density polyethylene EC1390 is used primarily in extrusion-coating applications that require fast line speeds and relatively low coating weights. When compared with other low-density po..
Tensile Strength at Break	9.00 MPa	1310 psi	500mm/min; ASTM D638 Type IV Specimen
Westlake EM811AA Low Density Polyethylene WESTLAKE low-density polyethylene EM811 is a low-density polyethylene used for injection molding. It is characterized by high flow and low stiffness.Application/UsesFlexible medicalMedicalFDA: This ..
Tensile Strength at Break	9.00 MPa	1310 psi	ISO 527
Ecomass® 1002ZD96 Tungsten Filled COPA Nontoxic alternative to Lead (Pb), weighting, balancing and radiation shielding applications.High Specific GravityTungsten Powder Filled Co-Polyamide (COPA)Excellent ToughnessInformation provided by..
Tensile Strength at Break	9.00 MPa	1310 psi	ASTM D638
ELASTO UK Dryflex® 600800S SEBS Based Material, Filled Qualities, 80A Hardness, Natural The most significant features of the 600-series are the improved heat stability, the sound reduction and that the material enables an easy and secure pigmenting for the customer. A filled material ..
Tensile Strength at Break	9.00 MPa	1310 psi	ASTM D638
ELASTO UK Dryflex® 602750S SEBS Based Material, Filled Qualities, 75A Hardness, Black The most significant features of the 600-series are the improved heat stability, the sound reduction and that the material enables an easy and secure pigmenting for the customer. A filled material ..
Tensile Strength at Break	9.00 MPa	1310 psi	ISO R 527
Fainplast Compounds GS 58/O Flexible PVC, Injection Molding for Footwear Antislip soles, opaque surface
Tensile Strength at Break	9.00 MPa	1310 psi	ISO R 527
Fainplast Compounds PM 5526/1 Flexible PVC, Lead Free Gaskets for frames
Tensile Strength at Break	9.00 MPa	1310 psi	ASTM D638
Arkema Group LOTRYL® 20 MA 08 Copolymer Ethylene - Methyl Acrylate LOTRYL® 20 MA 08 is a random copolymer of ethylene and methyl acrylate made by high-pressure radicalar polymerisation process. Due to the high methyl acrylate content, LOTRYL® 20 MA 08 is a polyme..
Tensile Strength at Break	9.00 MPa	1310 psi	ASTM-D638
Braskem F 7018 LDPE Extrusion Coating Polyethylene LDPE F 7018 is a low-density polyethylene and has excellent processability and sealability at low temperatures. It does not contain additives. Its applications include: extrusion coating; and injec..
Tensile Strength at Break	9.00 MPa	1310 psi	ASTM-D638
Braskem IJ33D LLDPE Injection Molding Polyethylene Copolymer IJ33D is a linear low-density polyethylene, narrow molecular weight butene-1 copolymer produced by the solution process for injection molding applications. It offers high fluidity, excellent flexibi..
Tensile Strength at Break	9.00 MPa	1310 psi	500 mm/min; ASTM D638 Type IV Specimen
Westlake EMAC® SP2261 23% Ethylene-Methyl Acrylate Copolymer Westlake EMAC® SP2261 is a 23% EMA copolymer containing antiblock. This resin is designed for blown or cast film, tie-layers, and extrusions where flexibility, compatibility, or low heat seal tempe..
Tensile Strength at Break	9.00 MPa	1310 psi	ISO R 527
Fainplast Compounds PMP 60 Flexible PVC, Extrusion Modified with PU Various profiles
Tensile Strength at Break	>= 9.00 MPa	>= 1310 psi
Beijing Evergrow Resources PTFE, 24% Bronze, 12% Glass Fiber, 6% Graphite Filled Filled PTFE article is manufactured by molding method with filled PTFE resin. Filled PTFE resin is manufactured by compounding PTFE granular resin with filler. Broadly speaking PTFE compounds have t..