Polymer Property : Tensile Strength, Yield = 40.0 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	40.0 MPa	5800 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics GELOY CR7500 ASA (Europe-Africa-Middle East) High heat ASA with optimum flow-impact balance. For Automotive applications and Automotive colors only.
Tensile Strength, Yield	40.0 MPa	5800 psi	ASTM D638
Ineos Nova 3601 General Purpose Crystal Polystyrene (discontinued **) Easy flow for high productivity, excellent post molding scuff resistanceApplications: Medical, LabwareExposure to gamma radiation in the 2.02-6.06 megarad range has no significant effect on the phys..
Tensile Strength, Yield	40.0 MPa	5800 psi	ASTM D638
Gichem GILAC E200 Acrylonitrile Butadiene Styrene (discontinued **) ABS medium fluidity, excellent resilience. Medium-High Injection speed.Information provided by GICHEM Gruppo Industriale Chimico
Tensile Strength, Yield	40.0 - 70.0 MPa	5800 - 10200 psi	Injection; ISO 527
Raschig Group RALUPOL® 8601 UP Glass-fiber reinforced polyester molding compound. Mold shrinkage similar to phenolic moulding compounds, low post-shrinkage, good electrical values, excellent heat resistance, good mechanical stren..
Tensile Strength, Yield	40.0 - 70.0 MPa	5800 - 10200 psi	Injection; ISO 527
Raschig Group SURAPLAST 54 UPA Glass fiber reinforced polyester molding compound. Minimal mold shrinkage and post-shrinkage, very good arc resistance, very good mechanical strength. This product meets the allowed upper limits for..
Tensile Strength, Yield	40.0 - 157 MPa	5800 - 22800 psi	Average value: 111 MPa Grade Count:78
Overview of materials for Nylon 66, 20% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 20% Glass Fiber Filled". Specific grades with glass content between 15% and 24% are included. ..
Tensile Strength, Yield	40.0 MPa	5800 psi	ASTM D638-02
Ipiranga Petrochem PH 0321 Polypropylene The production of polypropylene (PP) employs Spheripol technology from Montell / Italy. This technology has been acclaimed all over the world and is known as clean technology, because it does not pr..
Tensile Strength, Yield	40.0 MPa	5800 psi	ASTM D638
JPJ Technologies PP HC9012-M PP Homopolymer Injection Molding Information provided by JPJ Technologies
Tensile Strength, Yield	40.0 MPa	5800 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics LNP LUBRICOMP HH0420A PA11 LNP* HH0420A is a compound based on Nylon 11 containing proprietary fillers. Added features of this material are High Specific Gravity.
Tensile Strength, Yield	40.0 - 60.0 MPa	5800 - 8700 psi	ISO-DIS 527
Schwartz Technical Plastics LAMINEXÂ® 2141 Cotton Fabric, Phenolic Resin Impregnated, MoS2 Filled Application: bearing segments and prismatic bearingsInformation provided by Schwartz Technical Plastics GmbH
Tensile Strength, Yield	>= 40.0 MPa	>= 5800 psi	50mm/min; ASTM D638
Shanghai Ofluorine M-1 PVDF Molding Grade Description: M-1 PVDF is a kind of granules homopolymer, which has high melt viscosity, M-1 is more suitable for compression molding process. M-1 PVDF pellets as raw materials, the finished products..
Tensile Strength, Yield	40.0 MPa	5800 psi	2 in/min; ASTM D638
A. Schulman POLYFORT™ FPP 2388 Glass Reinforced Polypropylene DescriptionPolyfort® FPP 2388 is a 5% glass reinforced polypropylene.Information provided by A. Schulman.
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO 527
A. Schulman FORMION™ FI 232 10% Mineral Reinforced Ionomer / Nylon Alloy DescriptionFormion® FI 232 is an injection molding grade, 10% mineral reinforced Ionomer / Nylon alloy, which has been formulated for high scratch resistance, heat resistance and high stiffness.App..
Tensile Strength, Yield	40.0 MPa	5800 psi
TSE Industries Millathane® CM Millable Polyether Urethane Rubber, Hardness 66A MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje..
Tensile Strength, Yield	40.0 MPa	5800 psi	2" (50mm) per min.; ASTM D638
Formosa Plastics Formolene® 4142R Injection Molding Polypropylene Homopolymer with Nucleating, Antistat AdditivesApplications: Appliance, closure and thin wall applications.Formolene 4142R is a low viscosity, highly isotactic polypropylene homopolymer designed pri..
Tensile Strength, Yield	40.0 MPa @Temperature 160 °C	5800 psi @Temperature 320 °F	ISO 527-1/-2
DSM Stanyl® TW341-N PA46 Heat Stabilized, Lubricated
Tensile Strength, Yield	40.0 MPa	5800 psi	dry; ISO 527-1/-2
EMS-Grivory Grivory® TSS PA666 Product description: Grilon TSS is an unreinforced, heat stabilized, normal viscosity PA66 + PA6 injection molding grade. Grilon TSS has the following important properties: Excellent flow behaviorHi..
Tensile Strength, Yield	40.0 MPa	5800 psi	dry; ISO 527-1/-2
EMS-Grivory Grivory® XE 4071 black 9992 PA612 Product description: Grilamid XE 4071 BLACK 9992 is an impact modified unreinforced high viscosity polyamide 612 (PA612) extrusion grade with superior heat and hydrolysis resistance. Compared to sta..
Tensile Strength, Yield	40.0 MPa	5800 psi	ASTM D638
Clariant 6008 L Nylon 6, High Impact, Injection Molding Data provided by Clariant Masterbatches
Tensile Strength, Yield	40.0 MPa	5800 psi	dry; ISO 527-1/-2
EMS-Grivory Grivory® BR 40 PA6 Product description: Grilon BR 40 is a medium viscosity, unreinforced, heat stabilized PA6 grade for injection mounding and extrusion applications. Grilon BR 40 has the following important propertie..
Tensile Strength, Yield	40.0 MPa	5800 psi	chs 2.0 in/min; ASTM D638
Diamond Polymers ASA S-170 Lt Grey 50283UV f1 ASA Weatherable Polymers Injection Molding Grade, High Impact Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc.
Tensile Strength, Yield	40.0 MPa	5800 psi	50 mm/min
Arkema Group Rilsan® BMN Y TLD Nylon 11, MoS2 Filled (Conditioned) Designation ISO 1874-PA11,MHLR,12-020,MD05Rigid grade with molybdenum filler for injection molding. Available color: steel gray. Light and heat stabilized. Mold release agent.No need of lubricant. L..
Tensile Strength, Yield	40.0 MPa	5800 psi	50 mm/min; ISO 527-1/-2
BASF Ultramid® B3K BK00464 PA6 (Conditioned) Description: Easy flowing and stabilized injection-molding grade used for technical parts with wall thicknesses >2 mm, e.g. machinery components, fans and power tool housings.Information provided by..
Tensile Strength, Yield	40.0 MPa	5800 psi	2.0 in/min; ASTM D638
Ineos Nova 817 High Performance Styrenic Enhanced Polystyrene (discontinued **) High flow crystal polystyrene, Custom colorsApplications: Injection molding, Designed for use in high speed, Thin section applications and complex parts designs where custom coloring is a requiremen..
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO 527
Eurotec® Tecomid® NB50 BK001 IH PA6, impact modified, black, extrusion grade Information provided by Eurotec®
Tensile Strength, Yield	40.0 MPa	5800 psi	dry; ISO 527-1/-2
EMS-Grivory Grivory® BR 40 W PA6 Product description: Grilon BR 40 W is a medium viscosity, plasticized PA6 extrusion grade. Grilon BR 40 W has the following important properties: High flexibilityHigh stiffness Grilon BR 40 W is us..
Tensile Strength, Yield	40.0 MPa	5800 psi	dry; ISO 527-1/-2
EMS-Grivory Grivory® BZ 1 PA6 Information provided by EMS Grivory
Tensile Strength, Yield	40.0 MPa	5800 psi	ASTM D638
Ineos H13Z-00 Polypropylene Homopolymer (discontinued **) Suggested fabrication methods: Injection moldingFeatures: Nucleated, AntistaticTypical applications: Packaging, Consumer productsComplies with FDA specification, Title 21, CFR 177.1520.Typical prope..