Polymer Property : Tensile Strength, Yield = 5800 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	40.0 MPa	5800 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics Cycolac® MG34LG ABS Automotive: Low gloss ABS for unpainted interior applications.
Tensile Strength, Yield	40.0 MPa	5800 psi	50 mm/min; ISO 527
SABIC Innovative Plastics Cycolac® S702 ABS (Europe-Africa-Middle East) CYCOLAC S702 is a high impact ABS combined with a good flow. This material is developed for enclosures and housings found in appliances and automotive industries.This data was supplied by SABIC-IP f..
Tensile Strength, Yield	40.0 MPa	5800 psi	5 mm/min; ISO 527
SABIC Innovative Plastics Cycolac® S702S ABS (Europe-Africa-Middle East) CYCOLAC S702S is a high impact ABS combined with a good flow. This material is developed for enclosures and housings found in appliances and automotive industries. Cycolac S702S is anti-dust equiped..
Tensile Strength, Yield	40.0 MPa	5800 psi	50 mm/min; ISO 527
SABIC Innovative Plastics Cycolac® S702S ABS (Europe-Africa-Middle East) CYCOLAC S702S is a high impact ABS combined with a good flow. This material is developed for enclosures and housings found in appliances and automotive industries. Cycolac S702S is anti-dust equiped..
Tensile Strength, Yield	40.0 - 60.0 MPa	5800 - 8700 psi	Compression; ISO 527
Raschig Group MELOPLAS® 182 MF Wood flour-reinforced and inorganically filled, phenol-modified MF molding compound (MPF) in dark colors. Improved dimensional stability and electrical properties as compared with MP 180, high surf..
Tensile Strength, Yield	40.0 MPa	5800 psi	ASTM D638
Ineos Nova 4211 Medium Impact Polystyrene  (discontinued **) Excellent balance of properties, USP Class VIApplications: Consumer electronics, Injection molding applicationsProperties were determined on injection molded specimens at 23°C and 50% R.H. unless o..
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO R527
Fainplast Compounds RH 225 Rigid PVC, Antishock Extrusion Antishock pipes and profiles
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO R527
Fainplast Compounds RK 435 Rigid PVC, Extrusion Lead Free Electrical channels
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO 527
GEHR Plastics PVC-ELS Polyvinylchloride, Electrically Conductive Grade Polyvinyl chloride is a flame retardant material with an exceptional chemical resistance and also with lower stress cracking. PVC-U shows high mechanical strength, tensile strength and the continuou..
Tensile Strength, Yield	40.0 - 60.0 MPa	5800 - 8700 psi	ISO-DIS 527
Schwartz Technical Plastics LAMINEXÂ® 2101 Cotton Fabric, Phenolic Resin Impregnated Application: bearing segments and prismatic bearingsInformation provided by Schwartz Technical Plastics GmbH
Tensile Strength, Yield	40.0 MPa	5800 psi	Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics LNP THERMOCOMP 4X08423 FP-P (PFA) LNP* THERMOCOMP* 4X08423 is a compound based on PFA resin containing Glass Fiber.
Tensile Strength, Yield	40.0 MPa	5800 psi	Type I, 5 mm/min; ASTM D 638
SABIC Innovative Plastics LNP Thermocomp FF004 PE LNP THERMOCOMP* FF004 is a compound based on Polyethylene resin containing Glass Fiber.This data was supplied by SABIC-IP for the Americas region.
Tensile Strength, Yield	40.0 MPa	5800 psi	SABIC - Japan Method
SABIC Innovative Plastics NORYL INT1001 PPE+HIPS (Asia Pacific) PPE / HIPS unfilled, high flow for auto interior
Tensile Strength, Yield	40.0 MPa	5800 psi	ASTM-D638
Polyram RamLloy PVB101 ABS/NYLON alloy, Impact Modified Impact modified ABS/NYLON alloy for injection molding applicationsInformation provided by Polyram Ram On Ind.
Tensile Strength, Yield	40.0 MPa	5800 psi	ASTM D638
Total PS CPDS 850S Chlorine and Bromine Free Flame Retardant High Impact Polystyrene Total Petrochemicals Polystyrene 850S is a chlorine and bromine free flame retardant high impact polystyrene with excellent thermal stability and processability for injection molding.Suitable Applic..
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO 527
Cossa Polimeri ESTABLEND PA 3000 ABS / Nylon 6 Blend ESTABLEND PA is a blend of acrylonitrile butadiene styrene and polyamide 6.Easy processing, high surface quality, high chemical resistance, good heat resistanceInformation provided by Cossa Polimeri..
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO 527
Cossa Polimeri ESTABLEND PA 6000 ABS / Nylon 6 Blend ESTABLEND PA is a blend of acrylonitrile butadiene styrene and polyamide 6.Easy processing, high surface quality, high chemical resistance, good heat resistanceInformation provided by Cossa Polimeri..
Tensile Strength, Yield	40.0 MPa	5800 psi	ASTM D 638
Cossa Polimeri ESTADIENE 1218 V0 Flame Retardant ABS Acrylonitrile Butadiene StyreneFlame retardant class V0, PBDE free, good impact resistance, excellent processability, good surface appearance, good thermal resistanceInformation provided by Cossa Po..
Tensile Strength, Yield	40.0 MPa	5800 psi	dry; ISO 527-1/-2
EMS-Grivory Grivory® L 20 H FR PA12 FR Product Description: Grilamid L 20 H FR is a flame retarded, medium viscosity product, based on Polyamide 12 (PA12). Grilamid L 20 H FR contains no halogen or phosphorus, it has a light natural colo..
Tensile Strength, Yield	40.0 MPa	5800 psi	dry; ISO 527-1/-2
EMS-Grivory Grivory® L 20 nat PA12 Medium viscosity unmodified Polyamide 12Information provided by EMS Grivory
Tensile Strength, Yield	40.0 MPa	5800 psi	dry; ISO 527-1/-2
EMS-Grivory Grivory® L 20A Z PA12 Product Description: Grilamid L 20A Z is a medium viscosity product, based on Polyamide 12 (PA12). Grilamid L 20A Z is impact modified, hydrolysis-and heat stabilized. Grilamid L 20A Z is used for p..
Tensile Strength, Yield	40.0 MPa	5800 psi	dry; ISO 527-1/-2
EMS-Grivory Grivory® L 25 nat 6112 PA12 Product Description: Grilamid L 25 natural 6112 is a high viscous, Polyamide 12 extrusion grade. Grilamid L 25 natural 6112 fulfils the requirements of DIN 73378, Type PA 12-H. Application examples:..
Tensile Strength, Yield	40.0 MPa	5800 psi	dry; ISO 527-1/-2
EMS-Grivory Grivory® XE 4071 black 9992 PA612 Product description: Grilamid XE 4071 BLACK 9992 is an impact modified unreinforced high viscosity polyamide 612 (PA612) extrusion grade with superior heat and hydrolysis resistance. Compared to sta..
Tensile Strength, Yield	40.0 MPa	5800 psi	ASTM D638
Clariant 6008 L Nylon 6, High Impact, Injection Molding Data provided by Clariant Masterbatches
Tensile Strength, Yield	40.0 MPa <br>@Temperature 80.0 °C	5800 psi <br>@Temperature 176 °F	ISO Data
BASF Ultramid® 8202C PA6 (Dry) Ultramid 8202C is a modified crystalline and low viscosity, nylon 6 injection molding homopolymer. It is also available in heat stabilized (Ultamid 8202C HS) and/or pigmented versions. Its unique ..
Tensile Strength, Yield	40.0 MPa <br>@Temperature 80.0 °C	5800 psi <br>@Temperature 176 °F	ASTM Test
BASF Ultramid® 8202C PA6 (Dry) Ultramid 8202C is a modified crystalline and low viscosity, nylon 6 injection molding homopolymer. It is also available in heat stabilized (Ultamid 8202C HS) and/or pigmented versions. Its unique ..
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO 527-2
Ascend Performance Materials Vydyne® M344 Nylon 66/6, ignition resistant, Conditioned Vydyne® M344 is a halogenated, unfilled, flame-retardant PA66/6 copolymer designed with excellent strength and toughness. It is lubricated for machine feed and easy mold release and has an Underwri..
Tensile Strength, Yield	40.0 MPa	5800 psi	ASTM D638
GEHR Plastics ECOGEHR® PA 11 Nylon 11 Dry  (discontinued **) Nylon 11 is made 100% from the components of castor oil, and is thus wholly bio-based. ECOGEHR® Nylon 11 possesses similar properties to Nylon 12, and an excellent status with respect to applicatio..
Tensile Strength, Yield	40.0 MPa	5800 psi	ISO 527-1/-2
DSM Akulon® K225-KS (Cond.) Flame Retardant (Halogen free), Heat Stabilized Nylon 6 (North America) Description: The Akulon portfolio is engineered for optimum performance to suit different processing techniques and end use markets.Unfilled Extrusion ResinsAkulon resins are available with melt vis..
Tensile Strength, Yield	40.0 MPa <br>@Temperature 160 °C	5800 psi <br>@Temperature 320 °F	ISO 527-1/-2
DSM Stanyl® TE300 PA46 Heat Stabilized