Polymer Property : Vicat Softening Point = 198 °F Product List

Thermal Properties

Tips: 30 items are displayed at most.

Thermal Properties	Metric	English	Comments
Vicat Softening Point	92.0 °C <br>@Load 1.00 kg	198 °F <br>@Load 2.20 lb	ISO 306/A
Polimeri Europa Riblene® MP 30 R Low Density Polyethylene - Injection Molding Riblene MP 30 R is a medium fluidity low density polyethylene resin (LDPE).Parts made by Riblene MP 30 R are characterized by a medium rigidity.Main Applications: Riblene MP 30 R is suitable for in..
Vicat Softening Point	92.0 °C	198 °F	Rate B/120; ISO 306
SABIC Innovative Plastics Cycolac® MG8000SR ABS (Europe-Africa-Middle East) This data was supplied by SABIC-IP for the Europe-Africa-Middle East region.
Vicat Softening Point	92.0 °C	198 °F	Rate B/50; ISO 306
SABIC Innovative Plastics Cycoloy® C7122 PC+ABS (Asia Pacific) Cycoloy*C7122 is a mineral filled, non-halogenated flame retardant PC/ABS. Good stiffness with balanced flow and impact performance.
Vicat Softening Point	92.0 °C	198 °F	50°C/h 10N; ISO 306
DSM Yparex® 8403 R Polyolefin Adhesive Resin (European Grade)  (discontinued **) The Yparex range provides outstanding adhesion for all forms of polyethylene including cross-linked PE to: barrier plastics like EVOH and Polyamidemetals like aluminum, steel and copper.Yparex offer..
Vicat Softening Point	92.0 °C <br>@Load 1.00 kg	198 °F <br>@Load 2.20 lb	ISO 306/A
Polimeri Europa Riblene® MP 30 Low Density Polyethylene - Injection Molding Riblene MP 30 is a medium fluidity low density polyethylene resin (LDPE).Parts made by Riblene MP 30 are characterized by a medium rigidity.Main Applications: Riblene MP 30 is suitable for injectio..
Vicat Softening Point	92.0 °C	198 °F
Americas Styrenics Styron® 6010 High Impact Polystyrene  (discontinued **) STYRON® 6010 resin is a high impact polystyrene grade with a proprietary ignition resistance additive package to achieve a UL 94 V-0 rating. It offers high heat resistance, high modulus, good impac..
Vicat Softening Point	92.0 °C	198 °F	ASTM D1525
Ineos Nova 3500 General Purpose Crystal Polystyrene  (discontinued **) Good blending resin, Suitable for difficult to fill and thin wall molding, USP Class VIApplications: Cosmetic and medical packaging, Housewares, Consumer Electronic packaging, ToysExposure to gamma ..
Vicat Softening Point	92.2 °C	198 °F	ASTM D1525
ExxonMobil LD 051.LJ Molding, Extrusion and Compounding Resin  (discontinued **) LD 051.LJ resin is used in Blow molded, squeeze bottles, Pail lids, Closures, and Extruded profiles.Information provided by ExxonMobil Chemical
Vicat Softening Point	92.0 °C	198 °F
Eastman Tenite 383A-10 Cellulose Acetate Propionate  (discontinued **) 10% Plasticized. ISO data as provided by the manufacturer, Eastman Chemical.
Vicat Softening Point	92.0 Â°C	198 Â°F	ASTM D1525
LyondellBasell PetrotheneÂ® NA216000 Low Density Polyethylene ApplicationsPETROTHENE NA 216-000 is a general purpose, heavy and medium weight coating resin, capable of coating weights down to 7.0 lbs/ream at line speeds of 1200 ft/min. It can be applied to pa..
Vicat Softening Point	92.0 Â°C	198 Â°F	ASTM D1525
ICO Polymers ICOFLOâ„¢ 510-5028 400 Micron LLDPE Powder Description: ICOFLO 510-5028 is a premium polyethylene powder specifically designed to be used in the preparation of masterbatch (concentrate). By utilizing a free flowing powder as a carrier in ma..
Vicat Softening Point	92.0 Â°C	198 Â°F	ASTM D1525
ICO Polymers ICOFLOâ„¢ 510-5072 1200 Micron LLDPE Powder Description: ICOFLO 510-5072 is a premium polyethylene powder specifically designed to be used in the preparation of masterbatch (concentrate). By utilizing a free flowing powder as a carrier in ma..
Vicat Softening Point	92.0 Â°C	198 Â°F	ASTM D1525
ICO Polymers ICOFLOâ„¢ 510-5074 800 Micron LLDPE Powder Description: ICOFLO 510-5074 is a premium polyethylene powder specifically designed to be used in the preparation of masterbatch (concentrate). By utilizing a free flowing powder as a carrier in ma..
Vicat Softening Point	92.0 Â°C	198 Â°F	B120; ISO 306
Inno-Comp INNOPOLÂ® CS 1-4140 BAP 40% Talc-Filled Polypropylene Homopolymer INNOPOLÂ® CS 1-4140 B AP is a 40% talc-filled polypropylene homopolymer compound /PP-H TD40 (ISO 1043)/.INNOPOLÂ® CS 1-4140 B AP is recommended especially for producing products, where high stif..
Vicat Softening Point	92.0 Â°C	198 Â°F	ASTM D1525
Lushan RF1000 Adhesive Resin for Aluminum Plastic Composite Pipe Adhesive resin Lushan series for aluminum-plastic composite pipe is maleic grafted polyethylene used for PE-AL-PE, PEX-AL-PEX and PERT-AL-PERT composite pipes. Lushan adhesive resin could provides i..
Vicat Softening Point	92.0 Â°C	198 Â°F	ASTM D1525
LyondellBasell PetrotheneÂ® NA860008 Low Density Polyethylene ApplicationsPETROTHENE NA 860 is a series of medium flow, low density polyethylene resins for the injection molding of caps, closures and other specialty applications. These resins exhibit an excel..
Vicat Softening Point	92.0 Â°C	198 Â°F	ASTM D1525
ICO Polymers ICOFLOâ„¢ 510-5069 400 Micron LLDPE Powder Description: ICOFLO 510-5069 is a premium polyethylene powder specifically designed to be used in the preparation of masterbatch (concentrate). By utilizing a free flowing powder as a carrier in ma..
Vicat Softening Point	92.0 Â°C	198 Â°F	Rate "A" Loading 2 (50 degC/h 50N); ASTM Test
Styrolution LuranÂ® S 776 SE ASA Luran S 776 SE is a general purpose extrusion ASA grade with good toughness and strength, used for sheet and profile extrusions.Information provided by STYROLUTION, which is a joint venture between ..
Vicat Softening Point	92.0 Â°C	198 Â°F	Rate B/50; ISO 306
SABIC Innovative Plastics XYLEX FXY330DF PC+POLYESTER (Europe-Africa-Middle East) Polyester+PC alloy. Diffusion Effect. Color package may affect performance.
Vicat Softening Point	92.0 °C	198 °F
A. Schulman CP851 High Flow, Injection Molding Grade DescriptionCP 851 is a high flow injection molding grade of conventional (high pressure) low density polyethylene. ApplicationCP 851 meets the specifications in FDA Regulation 21 CFR177.1520 (c)3.1..
Vicat Softening Point	92.0 °C	198 °F	ASTM D1525
DuPont Bynel® 4288 Anhydride-Modified LDPE Adhesive Resin Bynel® Series 4200 resins are anhydride-modified, low-density polyethylene resins. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process ..
Vicat Softening Point	92.0 °C	198 °F	ASTM D1525
A. Schulman CP763-01 Extruded, Blow Molding and Injection Molding Grade Polyethylene DescriptionCP 763-01 is an extruded, blow molding, and injection molding grade of low density polyethylene having good processability and heat sealability. ApplicationCP 763-01 meets the specificat..
Vicat Softening Point	92.0 °C	198 °F	ASTM D1525
Eastman Tenite 360E3V45516 Propionate Water Clear, Trsp Tenite cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite cellulosi..
Vicat Softening Point	92.0 °C <br>@Load 5.10 kg	198 °F <br>@Load 11.2 lb	120°C/h; ISO 306
Covestro Bayblend® FR3005 BBS310 PC/ABS Blend Main characteristics:• High toughness even at low temperatures• High dimensional accuracy and stability• Good paintability• Good flowabilityGrade characteristics:• Flame-retardant• Injec..
Vicat Softening Point	92.2 °C	198 °F	ASTM D1525
ExxonMobil LL 6100.17 Injection Molding Resin Product Description: LL 6100 is a narrow molecular weight butane copolymer designed for applications that require easy processability. This resin offers outstanding toughness and tear resistance in ..
Vicat Softening Point	92.2 °C	198 °F	0.125 inch, 1 Kg; ASTM D1525
Diamond Polymers ASA S510 Description: ASA Weatherable Polymer, Injection Molding Grade, Medium ImpactInformation provided by Diamond Polymers, Inc.
Vicat Softening Point	92.0 °C	198 °F	ASTM D1525
Huntsman PE1059 Film Extrusion Polyethylene  (discontinued **) Homopolymer and FDA compliant.Features: Excellent draw down and good processability.Applications: Film extrusion: non-abrasive packaging applications.FDA Notes: Conforms to FDA regulation 21 CFR 177..
Vicat Softening Point	92.0 °C	198 °F	50°C/hr; 50N
Arkema Group Oroglas® V 045 I Acrylic, Extrusion Grade  (discontinued **) OROGLAS V 045 I is an extrusion that exhibits the following properties : 50% tougher than standard acrylics excellent optical properties ( comparable to that of standard acrylics) superior surface ..