- HOME
- POLYMER SEARCH
- Polymer Property : Processing Temperature = 100 °C
Polymer Property : Processing Temperature = 100 °C Product List
Processing PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | <= 100 °C | <= 212 °F | Hopper Temperature |
| Victrex® PEEK 600G Polyetheretherketone
(discontinued **) Product Description: High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, low viscosity, FDA food conta.. |
|||
| Processing Temperature | <= 100 °C | <= 212 °F | Hopper Temperature |
| Victrex® PEEK 150GL30 30% Glass Fiber Reinforced Product Description: High performance thermoplastic material, 30% glass fibre reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding, easy flow, FDA food contact c.. |
|||
| Processing Temperature | <= 100 °C | <= 212 °F | Hopper Temperature |
| Victrex® PEEK 450CA30 30% Carbon Fiber Reinforced General purpose, 30% carbon fiber reinforced, pelletized grade for injection molding.Information provided by Victrex. |
|||
| Processing Temperature | <= 100 °C | <= 212 °F | Hopper Temperature |
| Victrex® PEEK 450FC30 General Purpose Product Description: High performance thermoplastic material, 30% reinforced with carbon fibre / graphite / PTFE PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection molding and ext.. |
|||
| Processing Temperature | <= 100 °C | <= 212 °F | Hopper Temperature |
| Victrex® PEEK 650CA30 30% Carbon Fiber Filled, PolyEtherEtherKetone High performance thermoplastic material, 30% carbon fiber reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection molding and extrusion, low flow, FDA food contact compliant.. |
|||
| Processing Temperature | <= 100 °C | <= 212 °F | Hopper Temperature |
| Victrex® PEEK 90GL30 BLACK EU 30% Glass Fiber Filled, PolyEtherEtherKetone High performance thermoplastic material, 30% glass fiber reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection molding, very easy flow, FDA and EU food contact compliant, .. |
|||
| Processing Temperature | <= 100 °C | <= 212 °F | Hopper Temperature |
| Victrex® PEEK 90GL30 Polyetheretherketone, 30% Glass Fiber Reinforced Product Description:High performance thermoplastic material, 30% glass fibre reinforced Polyetheretherketone (PEEK), semi crystalline, granules for injection moulding, very easy flow, FDA food conta.. |
|||
| Processing Temperature | <= 100 °C | <= 212 °F | Hopper Temperature |
| Victrex® PEEK 90GL60 Polyetheretherketone, 60% Glass Fibre Reinforced Product Description:High performance thermoplastic material, 60% glass fibre reinforced Polyetheretherketone (PEEK), semi crystalline, granules for injection moulding, standard flow, FDA food contac.. |
|||
| Processing Temperature | <= 100 °C | <= 212 °F | Hopper Temperature |
| Victrex® PEEK 90HMF20 Polyetheretherketone (PEEK), 20% Carbon Fiber Reinforced Product Description: High performance thermoplastic material, 20% carbon fiber reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection molding, very easy flow, color black.T.. |
|||
| Processing Temperature | <= 100 °C | <= 212 °F | Hopper Temperature |
| Victrex® PEEK 90HMF40 Polyetheretherketone (PEEK), 40% Carbon Fiber Reinforced Product Description: High performance thermoplastic material, 40% carbon fiber reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection molding, easy flow, color black.Typica.. |
|||
| Processing Temperature | <= 100 °C | <= 212 °F | Hopper Temperature |
| Victrex® PEEK -HT™ G22 PolyEtherKetone, Unreinforced Product Description:High performance thermoplastic material, unreinforced PolyEtherKetone (PEK), semi crystalline, depth filtered granules for injection moulding, easy flow, FDA food contact complia.. |
|||
| Processing Temperature | 100 - 120 °C | 212 - 248 °F | Mixture Zone |
| Petroquimica Triunfo Tritheva® PN 2021 EVA Copolymer The Tritheva® PN 2021 resin is an Ethylene-Vinyl Acetate copolymer (EVA) mainly used for the production of crosslinked/expanded plates and other parts. This is an easy processing product with high .. |
|||
| Processing Temperature | 100 - 160 °C | 212 - 320 °F | Average value: 143 °C Grade Count:6 |
| Overview of materials for Solventless Epoxy Varnish, Electrical Insulation This property data is a summary of similar materials in the MatWeb database for the category "Solventless Epoxy Varnish, Electrical Insulation". Each property range of values reported is minimum and.. |
|||
| Processing Temperature | 100 °C | 212 °F | Cure time 3 hr at this temperature. |
| Momentive Performance Materials TSE322B Black Adhesive Sealant, Non-Corrosive Flowable One-part heat cure. Typical uses: Thermal barrier for automotive parts. Fabric seam seal.Data provided by the manufacturer, GE Silicones.GE Silicones became a part of Momentive Performance Materia.. |
|||
| Processing Temperature | 100 °C | 212 °F | Suggested baking time at this temperature is 0.25 hr. |
| Von Roll Isola IMI Varnish 74036 Solventless Epoxy Varnish for Electrical Insulation Data provided by Von Roll Isola USA.IMI solventless resins provide relatively void-free insulation for greater protection against severe environments and corona breakdown. Flash Point: >93°C. Usa.. |
|||
| Processing Temperature | <= 100 °C | <= 212 °F | Application Temp |
| XADC-Armoloy Diamond-Chrome Composite Coating XADC-Armoloy® combines the Armoloy® TDC chromium coating with spherical diamond particulates. The XADC-Armoloy® coating enhances the durability of components used in a wide range of applications.. |
|||
| Processing Temperature | 100 - 140 °C | 212 - 284 °F | Glue Line Temperature |
| EMS-Griltech Griltex® D 1500A Copolyamide Hotmelt Adhesive (Apparel Interlinings) Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo.. |
|||
| Processing Temperature | 100 - 150 °C | 212 - 302 °F | Glue Line Temperature |
| EMS-Griltech Griltex® D 1566A Heat Stabilized Copolyamide Hotmelt Adhesive (Apparel Interlinings) Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo.. |
|||
| Processing Temperature | 100 - 180 °C | 212 - 356 °F | extruder |
| Fainplast Compounds Hax™ HF 411 Flame Retardant Polyolefin Cable Compound Thermoplastic halogen free flame retardant compound based on polyolefins and mineral fillersGrade description:SheathingInformation provided by Fainplast Compounds |
|||
| Processing Temperature | 100 - 180 °C | 212 - 356 °F | extruder |
| Fainplast Compounds Hax™ HFC 087/2 Flame Retardant Polyolefin Cable Compound Thermoplastic halogen free flame retardant compound based on polyolefins and mineral fillersGrade description:Bedding for tandem extrusion onlyInformation provided by Fainplast Compounds |
|||
| Processing Temperature | 100 °C | 212 °F | Cure 3 hrs |
| Aptek 2120 PMF Low modulus urethane staking compound Premixed-frozen, low modulus urethane staking compoundAPTEK 2120-PMF is a one component, premixed-frozen, thixotropic, electrically insulating soft urethane adhesive. It was designed for the stakin.. |
|||
| Processing Temperature | 100 °C | 212 °F | Cure 3 hrs |
| Aptek 2312-PMF Electrically conductive, low modulus adhesive Premixed-frozen, electrically conductive, low modulus adhesiveAPTEK 2312-PMF is a one component, premixed-frozen, silver filled, electrically conductive soft paste adhesive. It is designed to bond m.. |
|||
| Processing Temperature | 100 - 180 °C | 212 - 356 °F | extruder |
| Fainplast Compounds Hax™ HF 045/11 Flame Retardant Polyolefin Cable Compound Thermoplastic halogen free flame retardant compound based on polyolefins and mineral fillersGrade description:Sheathing, insulation, low shrinkageInformation provided by Fainplast Compounds |
|||
| Processing Temperature | 100 - 180 °C | 212 - 356 °F | extruder |
| Fainplast Compounds Hax™ HF 223F Flame Retardant Polyolefin Cable Compound Thermoplastic halogen free flame retardant compound based on polyolefins and mineral fillersGrade description:High flexibility, good stress crack resistanceInformation provided by Fainplast Compound.. |
|||
| Processing Temperature | <= 100 °C | <= 212 °F | Hopper Temperature |
| Victrex® PEEK 150FC30 Easy Flow Product Description: High performance thermoplastic material, 30% reinforced with carbon fibre / graphite / PTFE PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding, easy .. |
|||
| Processing Temperature | <= 100 °C | <= 212 °F | Hopper Temperature |
| Victrex® PEEK 450GL15 Polyetheretherketone, 15% Glass Fibre Reinforced Product Description:High performance thermoplastic material, 15% glass fibre reinforced Polyetheretherketone (PEEK), semi crystalline, granules for injection moulding and extrusion, standard flow, F.. |
|||
| Processing Temperature | <= 100 °C | <= 212 °F | Hopper Temperature |
| Victrex® PEEK 650GL30 30% Glass Fiber Filled, PolyEtherEtherKetone High performance thermoplastic material, 30% glass fiber reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection molding and extrusion, low flow, color natural/beige.Typical.. |
|||
Copyright © lookpolymers.com All Rights Reserved