Polymer Property : Surface Resistance = 1.00e+14 ohm Product List

Electrical Properties

Tips: 30 items are displayed at most.

Electrical Properties	Metric	English	Comments
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
Radici Radilon® A RV330 (cond.) Nylon 66 Radilon® A is a range of polyamide 66 (PA66) products obtained through the polymerization of hexamethylendiamine and adipic acid, and used for injection, extrusion and blow-molding.Information prov..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
Radici Radilon® S RCV3515 (cond.) Nylon 6 Radilon® S is a range of polyamide 6 (PA6) products obtained through the polymerization of caprolactam and used for injection, extrusion and blow-molding.Information provided by Radici group.
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	ASTM D257
Shell Carilon® DB6G6A10 Polyketone, 30% Glass-Reinforced General-Purpose Injection Molding Grade  (discontinue Shell announced in Feb. 2000 that the Carilon product line is being discontinued. CARILON Polymer DB6G6A10 is a 30 percent short glass-fiber-reinforced, general purpose injection molding grade, wit..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
Polimeri Europa SINKRAL B813 ABS, Impact Grade  (discontinued **) Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,095-04-35-15 Injection moulding grade, providing very high impact resistance, even at low temperatures. Used as..
Surface Resistance	>= 1.00e+14 ohm	>= 1.00e+14 ohm	Voltage < 1 V after 2 min - 500 V; ASTM D 257/DIN 53483
Solvay Specialty Polymers Solef® 31008 PVDF Copolymer  (discontinued **) Key features of this grade: High Flexibility/ High Elongation/Cold Impact Resistance, Wire & Cable, Plenum, Formulated. Recommended processing is extrusion. Available as powder & granules.General ..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
DSM Akulon® Ultraflow™ K-FKGS6 Nylon 6-30% Glass Reinforced (European and Asian Grade) (Cond)  (discontinued * The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier ..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
LyondellBasell LupolenÂ® 3024 H LDPE, Film Grade FilmData was collected by ISO methods and originally provided by BASF. The LupolenÂ® product line is now produced by Basell.
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
LyondellBasell LupolenÂ® 3220 K LDPE, Film Grade FilmData was collected by ISO methods and originally provided by BASF. The LupolenÂ® product line is now produced by Basell.
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
LyondellBasell LupolenÂ® 5361 A HDPE, Blow Molding Grade Easy-to-process blow molding grade for stackable canisters (up to 60 l), used for packing surface-active liquids, laundry and dishwashing detergents, disinfectants, drums (up to 220 l) for various s..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	DIN 53482
Schwartz Technical Plastics LAMIGAMIDÂ® 700 Ultra High Molecular Weight Polyethylene Application: wear liners, sliding platesInformation provided by Schwartz Technical Plastics GmbH
Surface Resistance	>= 1.00e+14 ohm	>= 1.00e+14 ohm	ASTM D257
Solvay Specialty Polymers SolefÂ® 6010 Polyvinylidene Fluoride (PVDF) SolefÂ® 6010 PVDF homopolymer has medium viscosity and is typically processed by extrusion.Features: Homopolymer; Medium ViscosityAdditional Properties: Crystallization Heat - ASTM D3417 54.0 to 6..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	ASTM D257
Techmer ES HiFillÂ® PA6/6 GF33 LE BK 33% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 33% Filler by WeightFeatures: Low ExtractablesAppearance: BlackTPCI#7762101Information provided by TP Compos..
Surface Resistance	>= 1.00e+14 ohm	>= 1.00e+14 ohm	IEC 93
Supreme Petrochem SP 6456 High Heat Polystyrene Characteristics High heat resistance & strength Very good flow properties Available in any dark colorsProcessing Injection moldingApplications Instrument enclosures TV components Electrical encl..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
Polyram RamLloy PBB503 PC/ABS Alloy, Flame Retardant and Heat Stabilized Flame retardant and heat stabilized PC/ABS alloy for injection molding applications.Information provided by Polyram.
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	DIN 53482
Polyram RamShine PV300G2 ABS, 10% Glass Fiber 10% glass fiber reinforced ABS for injection molding applicationsInformation provided by Polyram Ram On Ind.
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	cond; IEC 60093
DSM Akulon® K224-G6-FC BK00001 PA6-GF30 30% Glass Reinforced, Food Contact Grade
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
Covestro Makrolon® 9125 Polycarbonate Medium viscosity, flame retardant extrusion and injection molding grade with 20% standard glass fibers and easy mold release agent.Information provided by Bayer.As of 1 September 2015, Bayer Materia..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
DSM Stanyl® TE250F9 Nylon 46-45% Glass Reinforced (European and Asian Grade) (Cond) Stanyl is a high performance polyamide providing good performance and value across a broad range of automotive and electronic applications. Stanyl offers:Highest mechanical properties at high temper..
Surface Resistance	>= 1.00e+14 ohm <br>@Temperature 23.0 °C	>= 1.00e+14 ohm <br>@Temperature 73.4 °F	IEC 60093
Ensinger TECASINT 5051 Polyimide, 30% Glass Fiber Filled (PI) TECASINT is a range of non-melting high temperature polyimides characterized by high strength over a wide range of temperatures, good long term thermal stability, minimal thermal expansion and excel..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	ASTM D257, IEC 93
EPICHEM Epilac T ABS Acrylonitrile Butadiene Styrene
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
DuPont Performance Polymers Rynite® FR530 NC010 Polyethylene Terephthalate (PET)  (Unverified Data**) 30% Glass Reinforced Flame Retardant Polyethylene Terephthalate Rynite FR530 NC010 is a 30% glass reinforced flame retardant modified polyethylene terephthalate resin.Information provided by DuPont ..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
Covestro Bayblend® KL 1-1430 Polycarbonate/ABS Blend Standard grade for cars.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro.
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
Eurotec® Tecopet® PT74 GR30 BK002 XA20 PET, 30% glass fiber reinforced, flame retardant - halogen (RoHS compliant), heat stabilized, black Information provided by Eurotec®
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
BASF Luranyl® KR 2460/3 Polyphenylene Ether + Styrene-Butadiene Blend Flame retardant grade with very high heat resistance; used for precision parts and where the material must withstand high injection temperatures (e.g. heater-fan impellers).Data was collected by ISO..
Surface Resistance	1.00e+14 - 1.00e+15 ohm	1.00e+14 - 1.00e+15 ohm	Average value: 4.00e+14 ohm Grade Count:3
Overview of materials for Polyethersulfone (PES), 30% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyethersulfone (PES), 30% Glass Fiber Filled". Specific grades with glass content between 25% and 34% ..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
Ineos ABS NOVODUR® P3T ABS, Injection Grade  (discontinued **) Injection molding grade, higher heat resistance.Applications: Automotive industry.Information provided by the manufacturer.Novodur is produced by Styrolution (2014). This grade was discontinued pri..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
Arkema Group Oroglas® V 044 Acrylic, Extrusion Grade  (discontinued **) OROGLAS V 044 is an extrusion grade offering good compromise between physical properties and thermal resistance.OROGLAS V 044 is recommended for extrusion of profiles, tubes and sheets.ISO data prov..
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm
Polimeri Europa KOBLEND PCA 447 PC+ABS  (discontinued **) Symbol according to ISO 1043/1: PC+ABS Injection moulding grade with very good impact behaviour even at low temperatures, good dimensional stability. Vicat/B50 = 110°C Main application fields: au..