Polymer Property : Dielectric Strength = 25.0 kV/mm Product List

Electrical Properties

Tips: 30 items are displayed at most.

Electrical Properties	Metric	English	Comments
Dielectric Strength	25.0 kV/mm	635 kV/in	dry; IEC 60243-1
Murtfeldt Murylon® 6 Cast Nylon 6 Murylon® 6 CAST has extremely low levels of residual stress thanks to the casting procedure used to produce it. This material is therefore ideally suited to extensively processed components.Specia..
Dielectric Strength	25.0 kV/mm	635 kV/in	ISO.243 DIN.53481
Omnia Plastica Omniamid PA 6 - Akulon 6 - Dry Semi-crystalline polymer of polyamide obtained by the polymerisation of the caprolactam. Its large popularity is due to both its good overall features as well as its cost-performance relationship. T..
Dielectric Strength	25.0 kV/mm	635 kV/in
Quadrant EPP Ertalon® 6 PLA PA 6, cast (ISO Data) Unmodified cast nylon 6 grade exhibiting characteristics which come very close to those of Ertalon 66 SA. It combines high strength, stiffness and hardness with good creep and wear resistance, heat ..
Dielectric Strength	25.0 - 35.0 kV/mm	635 - 889 kV/in	IEC 60243-1
Raschig Group 3505 Epoxy Glass-fiber reinforced epoxy molding compound. Good mechanical strength, very good electrical isolation properties and dimensional stability even at high temperatures. This product meets the allowed..
Dielectric Strength	25.0 kV/mm	635 kV/in
Permabond 105 Cyanoacrylate, for difficult rubbers PERMABOND® 105 is a low viscosity high purity cyanoacrylate adhesive. It is ideal for use on hard-to-bond plastics and rubbers such as natural rubber, EPDM and butyl rubber. Cyanoacrylate adhesives..
Dielectric Strength	25.0 kV/mm	635 kV/in
Permabond 170 Cyanoacrylate, gap filling PERMABOND® 170 is a methyl cyanoacrylate adhesive. It is a single part, high viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. Permabond 170 w..
Dielectric Strength	25.0 kV/mm	635 kV/in
Permabond 735 Cyanoacrylate, toughened PERMABOND® 735 is a toughened cyanoacrylate with very good impact and peel strength when compared to a conventional cyanoacrylate. It bonds rapidly at room temperature and its viscosity is stable o..
Dielectric Strength	25.0 kV/mm	635 kV/in
Permabond 737 Cyanoacrylate, toughened PERMABOND® 737 is a toughened cyanoacrylate with improved impact and peel strength for maximum flexibility. Its increased temperature resistance and dark color make 737 suitable for a wide range of..
Dielectric Strength	25.0 kV/mm	635 kV/in
3M Dyneon™ Fluorel™ FC-2176 Fluoroelastomer VF2 + HFP Dipolymer  (discontinued **) Data provided by the manufacturer, Dyneon LLC.Incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, and 4% Ca(OH)2. Good general purpose grade with good ..
Dielectric Strength	25.0 kV/mm	635 kV/in	IEC 60243-1
DSM Akulon® S224-KMV7 Nylon 66-35% Mineral Reinforced (European and Asian Grade) (Cond)  (discontinued **) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier ..
Dielectric Strength	25.0 kV/mm <br>@Thickness 2.00 mm	635 kV/in <br>@Thickness 0.0787 in	ASTM D149
Manifattura Cattaneo PTFE Polytetrafluoroethylene Manifattura Cattaneo products are available in semi-finished forms such as bars, profiles, sheets and plates.Information provided by Manifattura Cattaneo s.p.a.
Dielectric Strength	25.0 kV/mm	635 kV/in	ASTM D145
Idemitsu Kosan XarecÂ® N WA 7020 SPS, 20% Glass Filled Crystalline Polymer Blend, Glass Filled, Impact Modified. Used in Automotive Electronics applications.
Dielectric Strength	25.0 kV/mm	635 kV/in	ASTM D145
Idemitsu Kosan XarecÂ® WA 550 SPS, 30% Glass Filled Crystalline Polymer, Glass Filled. Used in Automotive and Industrial applications
Dielectric Strength	25.0 kV/mm	635 kV/in	IEC 60243-1
Lanxess DurethanÂ® T 40 ZS 000000 Partially aromatic polyamide Partially aromatic polyamide, injection molding and extrusion grade, easy release, transparent in all wall thicknesses, isotropic shrinkage, mechanical and electrical properties largely unaffected b..
Dielectric Strength	25.0 kV/mm	635 kV/in
Shin-Etsu Silicones KE-347TUV Silicone, RTV Coating Information Provided by Shin-Etsu Silicones of America, Inc.
Dielectric Strength	25.0 kV/mm	635 kV/in	ASTM D149
Samyang TribitÂ® 1500G30 Polybutylene Terephthalate, 30% Glass Reinforced Characteristics:G/F reinforcedHeat and Impact resistantApplications:AutomotiveConnectorGearOutdoor handleIgnition systemElectronicConnectorGas valveCoil bobbinSwitch caseRelay caseO/A partsAll infor..
Dielectric Strength	25.0 kV/mm	635 kV/in	JIS K2111
Toyobo PELPRENE™ P46D-01 Polyester TPE, High Viscous, High Durability Features: Polyester TPE, High Viscous, High DurabilityInformation provided by Toyobo.
Dielectric Strength	25.0 kV/mm	635 kV/in	JIS K2111
Toyobo PELPRENE™ S1002 Polyester TPE, Ultra Heat-resistant Features: Polyester TPE, Ultra Heat-resistantInformation provided by Toyobo.
Dielectric Strength	25.0 kV/mm <br>@Thickness 2.00 mm	635 kV/in <br>@Thickness 0.0787 in	ASTM D149
Toyobo VYLOPET® EMC132-01 Injection Molding Polyester Resin, Flame Resistant Applications: Relay partsFeatures: Excellent arc resistanceFlame resistanceInformation provided by Toyobo.
Dielectric Strength	25.0 kV/mm	635 kV/in	IEC 243
Vyncolit 2920 W Novolac Phenolic Mineral and organic filled molding compound with good dimensional stability and heat resistance.USES: Carburettor and intake manifold thermal insulator.Information provided by Vyncolit, a Sumitomo B..
Dielectric Strength	25.0 kV/mm	635 kV/in	IEC 60243-1
DSM Akulon® K222-D (Dry) Low Viscosity Nylon 6 (North America) Description: The Akulon portfolio is engineered for optimum performance to suit different processing techniques and end use markets.Unfilled Extrusion ResinsAkulon resins are available with melt vis..
Dielectric Strength	25.0 kV/mm	635 kV/in	IEC 60243-1
DSM Akulon® K222-D Nylon 6 (European and Asian Grade) (Dry) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier ..
Dielectric Strength	25.0 kV/mm	635 kV/in	IEC 60243-1
DSM Akulon® K225-KWS (Cond.) Nylon 6 (North America) Description: The Akulon portfolio is engineered for optimum performance to suit different processing techniques and end use markets.Unfilled Extrusion ResinsAkulon resins are available with melt vis..
Dielectric Strength	25.0 kV/mm	635 kV/in	conditioned; IEC 60243-1
EMS-Grivory Grivory® AS LF 20 PA66-Z20 Product description: Grilon AS LF 20 is a heat stabilized, normal viscosity PA 66 injection molding grade with 20% lubricant (PTFE + silicon oil). Grilon AS LF 20 has the following important propert..
Dielectric Strength	25.0 kV/mm	635 kV/in	cond; IEC 60243-1
DSM Stanyl® 46HF4550 PA46-GF50 50% Glass Reinforced, Heat Stabilized, High Flow, for E&E applications
Dielectric Strength	25.0 kV/mm	635 kV/in	IEC 60243-1
DSM Akulon® K224-G3 (Cond.) 15% Glass Reinforced Nylon 6 (North America) Description: The Akulon portfolio is engineered for optimum performance to suit different processing techniques and end use markets.Unfilled Extrusion ResinsAkulon resins are available with melt vis..
Dielectric Strength	25.0 kV/mm	635 kV/in	IEC 60243-1
DSM Akulon® K225-KS (Cond.) Flame Retardant (Halogen free), Heat Stabilized Nylon 6 (North America) Description: The Akulon portfolio is engineered for optimum performance to suit different processing techniques and end use markets.Unfilled Extrusion ResinsAkulon resins are available with melt vis..
Dielectric Strength	25.0 kV/mm	635 kV/in
3M Dyneon™ Fluorel™ FC-2260 Fluoroelastomer VF2 + HFP Dipolymer  (discontinued **) Data provided by the manufacturer, Dyneon LLC.Non-incorporated cure polymer, 65.9%F in polymer with 22% Medium Thermal Carbon Black (N990), 2% MgO, 1.8% Luperco™ 101XL Peroxide, and 2.5 % Triallyl ..
Dielectric Strength	25.0 kV/mm	635 kV/in	DIN 53481
Permabond 947 Cyanoacrylate, low odor PERMABOND 947 is a low odor, non-fogging non-frosting alkoxyethyl cyanoacrylate. The reduced odor improves worker comfort. Unsightly fogging adjacent to bondlines, common with other cyanoacrylate ad..