Polymer Property : Volume Resistivity = 2.00e+14 ohm-cm Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Electrical Properties	Metric	English	Comments
Volume Resistivity	2.00e+14 ohm-cm	2.00e+14 ohm-cm	ASTM D257
Quantum PVDF Information provided by Quantum Advanced Engineering Plastics
Volume Resistivity	2.00e+14 ohm-cm	2.00e+14 ohm-cm	IEC 60093
Polyplastics Duracon® TR-5 Acetal Co-polymer (POM), Mineral filling, Mineral filling, High rigidity, Low warpage DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O)..
Volume Resistivity	2.00e+14 ohm-cm	2.00e+14 ohm-cm
Tra-Con Tra-Bond 931-1 Low Viscosity Encapsulant TRA-BOND 931-1 low viscosity epoxy encapsulant is designed for high reliability applications, where capillary action is desired. This encapsulant provides environmental and mechanical protection.Inf..
Volume Resistivity	2.00e+14 ohm-cm	2.00e+14 ohm-cm
Dow Corning HV 1660/65 LIGHT GRAY SILICONE RUBBER KP 65 Shore hardness high consistency silicone rubber with excellent tracking and erosion resistance, excellent wet electrial properties,high voltage insulation applications.Information provided by Dow..
Volume Resistivity	2.00e+14 ohm-cm	2.00e+14 ohm-cm
Dow Corning SE 4486 SILICONE RTV One-part, white, moisture cure RTV, highly flowable, fast tack-free, high thermal conductivity, controlled volatility.Information provided by Dow Corning
Volume Resistivity	2.00e+14 ohm-cm	2.00e+14 ohm-cm	cond; IEC 60093
DSM EcoPaXX® Q-KG6 PA410-GF30 % Glass Reinforced, Heat Stabilized, for E&E applications
Volume Resistivity	2.00e+14 ohm-cm @Temperature 23.0 °C	2.00e+14 ohm-cm @Temperature 73.4 °F	ASTM D257
Fainplast Compounds FR 89/2 Flexible PVC, Insulation Insulation for special application
Volume Resistivity	2.00e+14 ohm-cm @Temperature 23.0 °C	2.00e+14 ohm-cm @Temperature 73.4 °F	ASTM D257
Fainplast Compounds FR 92/1 Flexible PVC, Insulation Power cables
Volume Resistivity	2.00e+14 ohm-cm @Temperature 23.0 °C	2.00e+14 ohm-cm @Temperature 73.4 °F	ASTM D257
Fainplast Compounds FR 95 Flexible PVC, Insulation Power cables
Volume Resistivity	2.00e+14 ohm-cm @Temperature 23.0 °C	2.00e+14 ohm-cm @Temperature 73.4 °F	ASTM D257
Fainplast Compounds HL 120/1 Flexible PVC, Insulation for High Temperatures Operating temperature 110°C
Volume Resistivity	2.00e+14 ohm-cm @Temperature 23.0 °C	2.00e+14 ohm-cm @Temperature 73.4 °F	ASTM D257
Fainplast Compounds KL 84/1 Flexible PVC, Insulation for High Temperatures Lead Free General purposes flame retardant
Volume Resistivity	2.00e+14 ohm-cm	2.00e+14 ohm-cm	50% RH, 500V; ASTM D257
ALM PA-616-GS Filled Nylon 12 Prototyping Polymer 50% glass sphere filled material for improved dimensional stability, increased stiffness, and higher temperature applications when compared to unfilled PA.The PA 616-GS can be processed on any laser..
Volume Resistivity	2.00e+14 ohm-cm @Temperature 20.0 °C	2.00e+14 ohm-cm @Temperature 68.0 °F	65% RH; ASTM D257
Arkema Group KYNAR FLEX® 2900-04 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. Flexible, flame and smoke suppressant. High stability in harsh thermal, chemical and ultraviolet environments. High toughness..
Volume Resistivity	2.00e+14 ohm-cm @Temperature 20.0 °C	2.00e+14 ohm-cm @Temperature 68.0 °F	65% RH; ASTM D257
Arkema Group KYNAR® 740 Black/Red Polyvinylidene Fluoride Homopolymer - Injection Molding and Extrusion Characteristics: Pigmented. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechanical strength, low permeability, abrasion resistance; high purityAppli..
Volume Resistivity	2.00e+14 ohm-cm @Temperature 20.0 °C	2.00e+14 ohm-cm @Temperature 68.0 °F	65% RH; ASTM D257
Arkema Group KYNAR® 760 Polyvinylidene Fluoride Homopolymer - Extrusion Characteristics: Natural resin - translucent, off-white hemispheres. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechanical strength, low permeabili..
Volume Resistivity	2.00e+14 ohm-cm	2.00e+14 ohm-cm	50% RH; ASTM D-257
Axiall 17940 Wire & Cable Flexible PVC THW insulation compound. Also suitable for 105C applications in 3/64 and larger sizes. UL recognized component for THW. Oil resistant I, VW-1 rated.Information provided by Georgia GulfGeorgia Gul..
Volume Resistivity	2.00e+14 ohm-cm	2.00e+14 ohm-cm
Aremco Aremco-Bond™ 2320 High Performance Epoxide Toughened, Unfilled, Fast-Setting, BPA Free, 2:1, High Peel & Shear Strength
Volume Resistivity	2.00e+14 ohm-cm @Temperature 20.0 °C	2.00e+14 ohm-cm @Temperature 68.0 °F	65% RH; ASTM D257
Arkema Group KYNAR® 460 Polyvinylidene Fluoride Homopolymer - Extrusion Characteristics: Natural resin - translucent, off-white hemispheres. Broad molecular weight distribution. High stability in harsh thermal, chemical and ultraviolet environments. High toughness a..
Volume Resistivity	2.00e+14 ohm-cm	2.00e+14 ohm-cm	ASTM D257
Unitika U-8000 U series resins are polymer alloys that are improved in resistance to oils and chemicals, the shortcoming of amorphous resins. They are transparent and have a greater moisture blocking property than..
Volume Resistivity	2.00e+14 ohm-cm	2.00e+14 ohm-cm	50% RH, 500V; ASTM D257
ALM PA 614-GS Filled Nylon 12 Prototyping Polymer 40% glass sphere filled material for improved dimensional stability, increased stiffness, and higher temperature applications when compared to unfilled PA.Drop-in replacement for other commercially ..
Volume Resistivity	2.00e+14 ohm-cm	2.00e+14 ohm-cm	50% RH, 500V; ASTM D257
ALM PA-615-GS Filled Nylon 12 Prototyping Polymer 50% glass sphere filled material for improved dimensional stability, increased stiffness, and higher temperature applications when compared to unfilled PA.Drop-in replacement for other commercially ..
Volume Resistivity	2.00e+14 ohm-cm	2.00e+14 ohm-cm	IEC 60093
Polyplastics Duracon® GM-20 Acetal Co-polymer (POM), Low warpage, GF 20% reinforced DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O)..
Volume Resistivity	2.00e+14 ohm-cm @Temperature 20.0 °C	2.00e+14 ohm-cm @Temperature 68.0 °F	65% RH; ASTM D257
Arkema Group KYNAR FLEX® 2750-01 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. Very flexible, lubricated. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechani..
Volume Resistivity	2.00e+14 ohm-cm @Temperature 20.0 °C	2.00e+14 ohm-cm @Temperature 68.0 °F	65% RH; ASTM D257
Arkema Group KYNAR FLEX® 2850-00 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. 150°C Temperature rating. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechani..
Volume Resistivity	2.00e+14 ohm-cm @Temperature 20.0 °C	2.00e+14 ohm-cm @Temperature 68.0 °F	65% RH; ASTM D257
Arkema Group KYNAR FLEX® 2850-07 Polyvinylidene Fluoride Copolymer - Extrusion & Molding Characteristics: Natural resin - translucent, off-white hemispheres. 150°C Temperature rating. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechani..
Volume Resistivity	2.00e+14 ohm-cm	2.00e+14 ohm-cm	IEC 60093
Polyplastics Duracon® GH-25 Acetal Co-polymer (POM), GF 25% reinforced, High strength, High rigidity DURACON® is a crystalline thermoplastic acetal copolymer. The primary raw material trioxane, a trimer of formaldehyde.The thermoplastic adopts a copolymer structure in which polyoxymethylene (-C-O)..