3M Dyneon™ THV™ 400 Fluorothermoplastic (discontinued **)

Category	Polymer , Thermoplastic , Fluoropolymer
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	3M Dyneon™ THV™ 400 Fluorothermoplastic (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Data provided by the manufacturer, Dyneon LLC.This unique, melt-processable, tetrafluoroethylene, hexafluoropropylene, and vinylidene fluoride (THV) terpolymer provides a unique combination of performance and processing advantages. Its thermal decomposition in air (TGA) is 430°C. It is recommended for film, tube, and profile extrusion, wire coating, and blow and injection molding.

Physical Properties	Metric	English	Comments
Density	1.97 g/cc	0.0712 lb/in³
Melt Flow	10 g/10 min @Load 5.00 kg, Temperature 260 °C	10 g/10 min @Load 11.0 lb, Temperature 500 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	53	53	ASTM D2240
Tensile Strength, Ultimate	23.4 MPa	3390 psi	Measured on extruded film, ASTM D638
Elongation at Break	500 %	500 %	Measured on extruded film, ASTM D638

Thermal Properties	Metric	English	Comments
Melting Point	150 - 160 °C	302 - 320 °F

Electrical Properties	Metric	English	Comments
Dielectric Constant	4.1 @Frequency 1e+7 Hz	4.1 @Frequency 1e+7 Hz
	5.9 @Frequency 100000 Hz	5.9 @Frequency 100000 Hz

Users viewing this material also viewed the following: