Lubrizol Estane® 2355-80AE Thermoplastic Polyurethane Elastomer

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Polyester Grade
Manufacturer	Lubrizol (former Noveon)
Trade Name	ESTANE®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Lubrizol Estane® 2355-80AE Thermoplastic Polyurethane Elastomer.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Formerly PellethaneFeature: Damping capacityAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by LubrizolLubrizol acquired the Pellethane product line from Dow in 2009.

Physical Properties	Metric	English	Comments
Density	1.18 g/cc	0.0426 lb/in³	ASTM D792
Linear Mold Shrinkage, Flow	0.0050 - 0.0060 cm/cm	0.0050 - 0.0060 in/in	ASTM D955
Linear Mold Shrinkage, Transverse	0.0020 - 0.0060 cm/cm	0.0020 - 0.0060 in/in	ASTM D955
Melt Flow	7.0 g/10 min @Load 8.70 kg, Temperature 224 °C	7.0 g/10 min @Load 19.2 lb, Temperature 435 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	85	85	ASTM D2240
Tensile Strength, Ultimate	39.2 MPa	5690 psi	ASTM D412
Elongation at Break	550 %	550 %	ASTM D412
50% Modulus	0.00386 GPa	0.560 ksi	ASTM D412
100% Modulus	0.00620 GPa	0.899 ksi	ASTM D412
300% Modulus	0.0152 GPa	2.20 ksi	ASTM D412
Tear Strength	126 kN/m	719 pli	ASTM D624
Taber Abrasion, mg/1000 Cycles	10	10	H22 Wheel, 1000g; ASTM D1044
Compression Set	25 % @Temperature 25.0 °C, Time 79200 sec	25 % @Temperature 77.0 °F, Time 22.0 hour	ASTM D395, Method B
	75 % @Temperature 70.0 °C, Time 79200 sec	75 % @Temperature 158 °F, Time 22.0 hour	ASTM D395, Method B
Tensile Set	60 %	60 %	Elongation set after break; ASTM D412

Thermal Properties	Metric	English	Comments
CTE, linear	166 µm/m-°C @Temperature 20.0 °C	92.2 µin/in-°F @Temperature 68.0 °F	ASTM D696
Vicat Softening Point	93.0 °C	199 °F	120°C/hr, 9.8N; ASTM D1525
Glass Transition Temp, Tg	-37.0 °C	-34.6 °F	DSC

Processing Properties	Metric	English	Comments
Melt Temperature	188 - 204 °C	370 - 399 °F	Extrusion
	193 - 204 °C	379 - 399 °F	Molding
Mold Temperature	16.0 - 60.0 °C	60.8 - 140 °F
Drying Temperature	82.0 - 93.0 °C	180 - 199 °F	air dew point <-40°C

Users viewing this material also viewed the following: