Plenco 2424 Phenolic, Granular, Injection Molded (discontinued **)

Category	Polymer , Thermoset , Phenolic , Phenolic; Unreinforced; Molded
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Plenco 2424 Phenolic, Granular, Injection Molded (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Two-stage Phenolic. PLENCO 02424 is a black, two stage, general purpose phenolic molding compound. It has a good balance of properties for a general purpose type material. It is used in electrical applications and can be molded by compression, transfer, or injection.Information supplied by Plenco

Physical Properties	Metric	English	Comments
Density	1.41 g/cc	0.0509 lb/in³	ASTM D792
Apparent Bulk Density	0.640 g/cc	0.0231 lb/in³	Apparent density per ASTM D1895
Water Absorption	0.31 %	0.31 %	ASTM D570
Linear Mold Shrinkage	0.010 cm/cm	0.010 in/in	per ATM D955. Post shrinkage is 0.29% at 72hr 120ºC per ASTM D1299.

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell E	86	86	ASTM D785
Tensile Strength, Ultimate	57.9 MPa	8400 psi	ASTM D638
Elongation at Break	0.77 %	0.77 %	ASTM D638
Tensile Modulus	8.45 GPa	1230 ksi	ASTM D638
Flexural Yield Strength	81.1 MPa	11800 psi	ASTM D790
Flexural Modulus	7.53 GPa	1090 ksi	ASTM D790
Compressive Yield Strength	199.7 MPa	28960 psi	ASTM D695
Charpy Impact, Notched	0.190 J/cm²	0.904 ft-lb/in²	ASTM D256
Impact	102	102	J/m Plenco drop ball test

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	200 °C	392 °F	Heat resistance per ASTM D794
Deflection Temperature at 1.8 MPa (264 psi)	160 °C	320 °F	ASTM D648
Flammability, UL94	V-1 @Thickness 6.10 mm	V-1 @Thickness 0.240 in

Electrical Properties	Metric	English	Comments
Electrical Resistivity	5.33e+11 ohm-cm	5.33e+11 ohm-cm	ASTM D257
Dielectric Constant	5.3 @Frequency 1e+6 Hz	5.3 @Frequency 1e+6 Hz	ASTM D150
Dielectric Strength	9.00 kV/mm	229 kV/in	Step by Step; ASTM D149
	10.4 kV/mm	264 kV/in	Short Time; ASTM D149
Dissipation Factor	0.060 @Frequency 1e+6 Hz	0.060 @Frequency 1e+6 Hz	ASTM D150
Arc Resistance	160 sec	160 sec	ASTM D495
Comparative Tracking Index	175 V	175 V	ASTM D3638

Users viewing this material also viewed the following: