- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Polykemi AB POLYelast TPE ED80 D40 UV Thermoplastic Elastomer
Polykemi AB POLYelast TPE ED80 D40 UV Thermoplastic Elastomer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Polykemi AB |
| Trade Name | POLYelast |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polykemi AB POLYelast TPE ED80 D40 UV Thermoplastic Elastomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Polykemi AB
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.910 g/cc | 0.0329 lb/in³ | ISO 1183 |
| Linear Mold Shrinkage | 0.018 - 0.022 cm/cm | 0.018 - 0.022 in/in | With Flow; ISO 2577 |
| 0.018 - 0.022 cm/cm | 0.018 - 0.022 in/in | Across Flow; ISO 2577 | |
| Melt Index of Compound | 8.0 g/10 min @Load 2.16 kg, Temperature 230 °C |
8.0 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 40 @Time 15.0 sec |
40 @Time 0.00417 hour |
Polykemi |
| Tensile Strength at Break | <= 10.0 MPa | <= 1450 psi | ISO/R527 |
| Elongation at Yield | 9.0 % | 9.0 % | ISO/R527 |
| Flexural Modulus | 0.450 GPa @Temperature 23.0 °C |
65.3 ksi @Temperature 73.4 °F |
ISO 178 |
| Charpy Impact, Notched | 2.70 J/cm² @Temperature 23.0 °C |
12.8 ft-lb/in² @Temperature 73.4 °F |
ISO 179 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 50.0 °C | 122 °F | 120°C/h; ISO 75/1 |
| Vicat Softening Point | 100 °C @Load 1.00 kg |
212 °F @Load 2.21 lb |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 200 - 230 °C | 392 - 446 °F | |
| Mold Temperature | 20.0 - 40.0 °C | 68.0 - 104 °F | |
| Back Pressure | 0.500 - 1.00 MPa | 72.5 - 145 psi |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Holding Pressure () | 20-40 | % of injection pressure |
| Injection Pressure | High | |
| Injection Speed () | High |
Users viewing this material also viewed the following:
- Westlake EMAC® SP1400 Specialty Copolymer (discontinued **)
- KKPC KOSYN KBR 710L Polybutadiene Rubber (Low cis BR)
- Meehanite Almanite® WSH Wear and Abrasion Resisting Cast Iron
- Spartech Royalite R87/59 ABS/PVC Weather Resistant Sheet
- Saint-Gobain Chemlam® RL® RL3000 PTFE-Coated Spandex Fiber/Polyamide Blend Reinforced Laminate
- SABIC Innovative Plastics NORYL GTX GTX975 PPE+PA (Asia Pacific)
- DSM Stanyl® OCD2100 BK27021 PA46-GF40
- Carmel Olefins CAPILENE® HU 75 AV Polypropylene Impact Copolymer
- Rogers Corporation Poron® 4701-50-20 Cellular Urethane Foam
Copyright © lookpolymers.com All Rights Reserved