- HOME
- POLYMER SEARCH
- Iron Base
- Special Metals INCOLOY® Alloy 909
Special Metals INCOLOY® Alloy 909
| Category | Metal , Superalloy , Iron Base |
| Manufacturer | Special Metals (includes the former Inco Alloys International Inc.) |
| Trade Name | INCOLOY® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Special Metals INCOLOY® Alloy 909.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
A nickel-iron-cobalt alloy with a silicon addition and containing niobium and titanium for precipitation hardening. It is similar to INCOLOY alloys 903 and 907 in that it has low thermal expansion and high strength. However, the silicon addition results in improved notch-rupture and tensile properties that are achieved with less-restrictive processing and significantly shorter heat treatments. Used for gas-turbine casings, shrouds, vanes, and shafts. Standard product forms are round, flats, forging stock, extruded section, sheet, and wire.Data provided by the manufacturer, Special Metals.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 8.30 g/cc | 0.300 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 1160 MPa @Temperature 550 °C |
168000 psi @Temperature 1020 °F |
Precipitation Hardened prior to test |
| 1300 MPa @Temperature 23.0 °C |
189000 psi @Temperature 73.4 °F |
||
| Tensile Strength, Yield | 1140 MPa @Strain 0.200 % |
165000 psi @Strain 0.200 % |
Precipitation Hardened. Value at room temperature |
| 950 MPa @Strain 0.200 %, Temperature 550 °C |
138000 psi @Strain 0.200 %, Temperature 1020 °F |
Precipitation Hardened prior to test | |
| Elongation at Break | 15 % | 15 % | Precipitation Hardened |
| 15 % @Temperature 550 °C |
15 % @Temperature 1020 °F |
Precipitation Hardened prior to test. |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 7.70 µm/m-°C @Temperature 20.0 - 427 °C |
4.28 µin/in-°F @Temperature 68.0 - 801 °F |
|
| Specific Heat Capacity | 0.427 J/g-°C | 0.102 BTU/lb-°F | |
| Thermal Conductivity | 14.8 W/m-K | 103 BTU-in/hr-ft²-°F | |
| Melting Point | 1395 - 1430 °C | 2543 - 2610 °F | |
| Solidus | 1395 °C | 2543 °F | |
| Liquidus | 1430 °C | 2610 °F |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Aluminum, Al | 0.030 % | 0.030 % | |
| Carbon, C | 0.010 % | 0.010 % | |
| Cobalt, Co | 13 % | 13 % | |
| Iron, Fe | 42 % | 42 % | |
| Nickel, Ni | 38 % | 38 % | |
| Niobium, Nb (Columbium, Cb) | 4.7 % | 4.7 % | |
| Silicon, Si | 0.40 % | 0.40 % | |
| Titanium, Ti | 1.5 % | 1.5 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 0.0000728 ohm-cm | 0.0000728 ohm-cm | |
| Curie Temperature | 400 - 455 °C | 752 - 851 °F |
Users viewing this material also viewed the following:
- PolyOne Geon™ Vinyl Wire & Cable JA306BA Polyvinyl Chloride, Flexible (PVC, Flexible)
- MV Labs Y870 Y2(C2O4)3·9H2O Yttrium oxalate hydrate
- Lehmann & Voss LUVOCOM® 80-7489 Polyacetal-copolymer, with carbon fiber
- Garlock 7164 SBR Rubber Lining
- Kolon KOPA® KN333HRBL Heat Resistant Nylon 66
- Polyram RamOfin PPC101 Polypropylene Copolymer, Heat Stabilized
- Asahi Kasei Xyron® 140Z Modified Polyphenylene Ether
- Arkema Group Lacovyl® RB 8010 PVC
- 3M PS442 White Yupo™ EDP Label Product
- Lucent Polymers PPC-310 Polypropylene, Impact Modified
Copyright © lookpolymers.com All Rights Reserved