| High Temp Metals Alloy 49 Iron-Nickel High Permeability Alloy, Strip, Formed and Deep Draw Quality |
|
|
| Kennametal Stellite Deloro® 22 Nickel Alloy |
Kennametal Stellite
|
Deloro®
|
| Kennametal Stellite Deloro® 40G |
Kennametal Stellite
|
Deloro®
|
| Kennametal Stellite Deloro® 6116 Nickel Alloy |
Kennametal Stellite
|
Deloro®
|
| Kennametal Stellite Deloro® 711 PM after P/M Processing |
Kennametal Stellite
|
Deloro®
|
| Kennametal Stellite Nistelle® C-4C Nickel Alloy |
Kennametal Stellite
|
Nistelle®
|
| Kennametal Stellite Stellite® 6B solution heat-treated at 1232°C, air cooled, 15.9 mm thick plate |
Kennametal Stellite
|
Stellite®
|
| Kennametal Stellite Stellite® F Cobalt Alloy |
Kennametal Stellite
|
Stellite®
|
| MetalTek MTEK CW-12MW Cast UNS N30002 Severe Corrosion and Heat Resistant Alloy |
MetalTek
|
MTEK
|
| MetalTek MTEK CZ-100 Cast UNS N02100 Severe Corrosion and Heat Resistant Alloy |
MetalTek
|
MTEK
|
| Haynes 188 alloy, 30% cold reduction, 3.2 mm thick sheet, 1065°C for 5 minutes |
Haynes International, Inc.
|
|
| Haynes 214® alloy, hot rolled solution annealed plate 12.7 mm (1/2 in.) thick |
Haynes International, Inc.
|
|
| Haynes 230® alloy, 20% cold reduction |
Haynes International, Inc.
|
|
| Haynes 230® alloy, 20% cold reduction, 1121°C anneal for 5 minutes |
Haynes International, Inc.
|
|
| Haynes 230® alloy, 40% cold reduction |
Haynes International, Inc.
|
|
| Haynes Hastelloy® S alloy, gas tungsten arc welded, aged 1300 hours |
Haynes International, Inc.
|
Hastelloy®
|
| Haynes Hastelloy® W alloy, gas tungsten arc welds, as-welded |
Haynes International, Inc.
|
Hastelloy®
|
| Haynes HR-120® alloy, solution heat-treated aged at 1400°F for 1000 hours |
Haynes International, Inc.
|
|
| Haynes HR-160® alloy, plate, aged 1000 hours at 871°C (1600°F) |
Haynes International, Inc.
|
|
| Haynes HR-160® alloy, plate, aged 8000 hours at 871°C (1600°F) |
Haynes International, Inc.
|
|
| Haynes Ultimet® alloy, aged 1000 hours at 204°C (400°F) |
Haynes International, Inc.
|
Ultimet®
|
| Haynes 25 alloy, sheet |
Haynes International, Inc.
|
|
| Haynes 556® alloy, 30% cold reduction, 1010°C anneal for 5 minutes |
Haynes International, Inc.
|
|
| Haynes 625 alloy, cold rolled and 1050°C mill-annealed sheet |
Haynes International, Inc.
|
|
| Haynes 625 alloy, plate after 4000 hours at 760°C (1400°F) |
Haynes International, Inc.
|
|
| Haynes Hastelloy® B-3® alloy, 0% cold work |
Haynes International, Inc.
|
Hastelloy®
|
| Haynes Hastelloy® C-22® alloy, 40% cold worked sheet, aged 100 hours at 500°C |
Haynes International, Inc.
|
Hastelloy®
|
| Haynes Hastelloy® G-30® alloy, 50% cold rolled |
Haynes International, Inc.
|
Hastelloy®
|
| Haynes HR-160® alloy plate, aged 8000 hours at 649°C (1200°F) |
Haynes International, Inc.
|
|
| HP Alloys Alloy 718, 10% Cold Worked |
High Performance Alloys, Inc
|
|
| HP Alloys Alloy C-276, 40% Cold Worked |
High Performance Alloys, Inc
|
|
| Special Metals INCONEL® 725 Nickel Superalloy (UNS N07725), Age Hardened Tube |
Special Metals (includes the former Inco Alloys International Inc.)
|
INCONEL®
|
| Elgiloy® Co-Cr-Ni Alloy, Strip, 20% Cold Reduction |
Elgiloy Specialty Metals
|
|
| Elgiloy® Co-Cr-Ni Alloy, Wire, 47% Cold Reduction (Coil Spring Range) |
Elgiloy Specialty Metals
|
|
| AFE Technologies Cronite 34Ni/25Cr/Nb No. HR 33 Nb |
AFE TEchnologies; North American Cronite
|
Cronite
|
| Carpenter BioDur™ CCM Plus™ Medical Implant Alloy, Annealed 1121°C 1 hr |
Carpenter Technology Corporation (Cartech)
|
BioDur™
|
| ATI Allvac® 330 UNS N08330 Nickel Superalloy |
ATI Allvac
|
|
| ATI Allvac® 720 Nickel Superalloy, Heat Treatment: 1093°C (2000°F) + Age |
ATI Allvac
|
|
| ATI Allvac® Nickelvac® 600 Nickel Superalloy, Heat Treatment: 927°C (1700°F) Anneal |
ATI Allvac
|
Nickelvac®
|
| AFE Technologies Cronite 37Ni/18Cr No. HR5 |
AFE TEchnologies; North American Cronite
|
Cronite
|
| Haynes 25 alloy, room temperature after 15% cold reduction |
Haynes International, Inc.
|
|
| Haynes 25 alloy, room temperature after 20% cold reduction, 1065°C anneal for 5 minutes |
Haynes International, Inc.
|
|
| Haynes 625 alloy, 40% cold reduction, 1010°C anneal for 5 minutes |
Haynes International, Inc.
|
|
| Haynes Hastelloy® C-4 alloy, sheet, heat treated at 1066°C, rapid quenched |
Haynes International, Inc.
|
Hastelloy®
|
| Haynes Hastelloy® G-30® alloy, 10% cold rolled |
Haynes International, Inc.
|
Hastelloy®
|
| HP Alloys Alloy 718, 15% Cold Worked |
High Performance Alloys, Inc
|
|
| HP Alloys Alloy 718, 5% Cold Worked |
High Performance Alloys, Inc
|
|
| Resistalloy International Resistalloy 8020 Nickel Chromium Electrical Resistance Alloy |
Resistalloy International Limited
|
|
| HP Alloys HPA COBALT Alloy 6B, Wear Resistant, (Co-Cr-W) (UNS R30016) |
High Performance Alloys, Inc
|
|
| Kennametal Stellite Extrudalloy 50 Nickel Alloy |
Kennametal Stellite
|
Extrudalloy
|
