Zotefoams Plastazote® HD115 High Density Polyethylene Foam

Category	Polymer , Thermoplastic , Polyethylene (PE)
Manufacturer	Zotefoams
Trade Name	Plastazote®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Zotefoams Plastazote® HD115 High Density Polyethylene Foam.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Plastazote® is a closed cell, cross-linked polyethylene foam manufactured using nitrogen expansion technology to produce foams with exceptional cell size uniformity, low odor / high purity and outstanding physical attributes.Information provided by Zotefoams

Physical Properties	Metric	English	Comments
Density	0.0900 - 0.125 g/cc	0.00325 - 0.00452 lb/in³	sheet density
	0.115 g/cc	0.00415 lb/in³	Nominal skin/skin; BS ISO 7214 1998
Cell Length	1.05 mm	0.0413 in	Typical Diameter
	0.700 - 1.60 mm	0.0276 - 0.0630 in

Mechanical Properties	Metric	English	Comments
Hardness, Shore OO	83	83	10 mm cell/cell thickness; ISO 868 1985
Tensile Strength	2.39 MPa	347 psi	ISO 7214 1998
Elongation at Break	95 %	95 %
Flexural Modulus	0.0230 GPa	3.34 ksi	BS4370, part 4, method 14
Compressive Yield Strength	0.667 MPa @Strain 10.0 %	96.7 psi @Strain 10.0 %	BS ISO 7214 1998
	0.791 MPa @Strain 25.0 %	115 psi @Strain 25.0 %	BS ISO 7214 1998
	0.805 MPa @Strain 40.0 %	117 psi @Strain 40.0 %	BS ISO 7214 1998
	0.897 MPa @Strain 50.0 %	130 psi @Strain 50.0 %	BS ISO 7214 1998
Tear Strength	8.31 kN/m	47.4 pli	BS EN ISO 8067 1995
Compression Set	7.0 % @Time 79200 sec, Strain 25.0 %	7.0 % @Time 22.0 hour, Strain 25.0 %	24 hr recovery; BS ISO 7214 1998
	13.5 % @Time 79200 sec, Strain 25.0 %	13.5 % @Time 22.0 hour, Strain 25.0 %	0.5 hr recovery; BS ISO 7214 1998
	14 % @Time 79200 sec, Strain 50.0 %	14 % @Time 22.0 hour, Strain 50.0 %	24 hr recovery; BS ISO 7214 1998
	26 % @Time 79200 sec, Strain 50.0 %	26 % @Time 22.0 hour, Strain 50.0 %	0.5 hr recovery; BS ISO 7214 1998

Thermal Properties	Metric	English	Comments
Thermal Conductivity	0.0769 W/m-K	0.534 BTU-in/hr-ft²-°F	mean temp of 10°C; ISO 8302 1991
Maximum Service Temperature, Air	130 °C	266 °F
Minimum Service Temperature, Air	-70.0 °C	-94.0 °F
Flammability Test	0.30 @Thickness 13.0 mm	0.30 @Thickness 0.512 in	Horizontal Burn Rate, mm/sec; ISO 7214 1998
	0.50 @Thickness 5.00 mm	0.50 @Thickness 0.197 in	Horizontal Burn Rate, mm/sec; ISO 7214 1998

Users viewing this material also viewed the following: