Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.52 g/cc | 0.0549 lb/in³ | STN EN ISO 1183-1 |
Plastcom SLOVASTER® B1 GF 15 FRL 4 PBT reinforced with glass fibers, flame retarded PBT reinforced with 15 % glass fiber, flame retarded with the halogen flame retardant. Anisotropy of shrinkage enables the injection molding of round, cylindrical or other hole products. Application.. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ASTM D792, ISO 1183 |
Nilit Nilamon B3 H7 GK 35 15% Glass Fiber, 25% Mineral Reinforced PA6 Description: Nilamon B3 H7 GK 35 provides a combination between low warpage and high stiffness, while retaining a good impact strength. It has a high heat aging resistance, so that it is suitable fo.. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ISO 1183 |
Polykemi AB POLYshine PBT D311 GF30 PBT, Glass-Fiber Reinforced, Modified Information provided by Polykemi AB |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP LUBRICOMP CZL36 PS LNP LUBRICOMP* CZL36 is a compound based on Polystyrene resin containing 30% Milled Glass and 15% PTFE. Added features of this material include: Internally Lubricated. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ISO 1183 |
LATI LARPEEK 10 G/30 30% Glass Reinforced Polyetheretherketone (PEEK)
(Unverified Data**) Larpeek polyetheretherketone (PEEK) is a high performance thermoplastic offering cost effective performance in difficult environments across all industries. PEEK is temperature resistant (up to 250°.. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ASTM D792 |
Global GPC-140 40% Glass Filled Polycarbonate Information provided by Global Polymers Corporation. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP LUBRICOMP KL004A Acetal Homopolymer LNP LUBRICOMP* KL004A is a compound based on Acetal Homopolymer resin containing 20% PTFE. Added feature of this material is: Wear Resistant. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP LUBRICOMP KL004L Acetal Copoly (Asia Pacific) LNP* Lubricomp* KL004L is a compound based on Acetal Copolymer resin containing PTFE. Added features of this material include: Internally Lubricated, Low Extractible. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ISO 1183 |
SABIC Innovative Plastics LNP LUBRICOMP OCL36 PPS - Linear LNP LUBRICOMP* OCL36 is a compound based on PPS - Linear resin containing 30% Carbon Fiber, 15% PTFE. Added features of this material include: Electrically Conductive, Wear Resistant. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ISO 1183 |
SABIC Innovative Plastics Valox® ENH4550 PBT (Asia Pacific) 25% GF reinforced, Non-Brominated & Non-Chlorinated Flame Retardant, PBT resin. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ASTM D792 |
Techmer ES Luriblend® POM CO E TL20 Availability: North AmericaForms: PelletsAdditive: PTFE Lubricant(20%)Features: Lubricated, Good Wear Resistance and CopolymerProcessing Method: ExtrusionInformation provided by TP Composites, Inc. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ISO 1183 |
Teijin Panlite® GS-3430 Friction and Abrasion Resistant, Glass Fiber Reinforced Polycarbonate Resin GF 30% reinforced grade, meeting UL 94 V-2. It is compounded with fluorine powder to improve friction and abrasion resistance, maintaining excellent characteristics of polycarbonate resin.Applicatio.. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ASTM D792 |
SABIC Innovative Plastics LNP THERMOCOMP ZF0089 PPE+PS LNP* THERMOCOMP* ZF0089 is a compound based on PPE+PS resin containing 40% Glass Fiber. Added features of this material include: Exceptional Processing, Flame Retardant. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ISO 1183 |
Polyplastics Duranex® HN7315 Polybutylene Terephthalate (PBT), Low warpage, 15% GF filled DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers .. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ISO 1183-87 |
Wellman Wellamid® FRGS25-66-NBK3 Nylon 66, 25% Glass Sphere Reinforced, Flame Retardant All information provided by Wellman Engineered Resins. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | DIN 53479 |
Polyram RamSter PF320G2 PBT, 10% Glass Fiber, Flame Retardant 10% Glass fiber reinforced, flame retardant PBT for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | |
Loctite® 3563 Epoxy Snap Cure Underfill COB/DCA Encapsulants are essential to the reliability of flip chip assemblies because they minimize the thermal mismatch between the flip chip and substrate.Loctite® Underfills and Encapsulants imp.. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ASTM D792 |
Ensinger Tecapeek® XP-90 Compression Molded PEEK Compound, 25% Fiberglass Ensinger Special Polymers offers over twenty different VICTREX® PEEK blends to choose from and has the capability to blend custom compounds for specific applications. Compression molding results in.. |
|||
Density | 1.52 - 1.56 g/cc | 0.0549 - 0.0564 lb/in³ | ISO R 1183 |
Fainplast Compounds GA 87/1 Flexible PVC, Flame Retardant Sheathing General purposes |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ISO 1183 |
Eurotec® Tecodur® PB70 GR20 BK002 TD21 PBT/PET, 20% glass fiber reinforced, flame retardant - halogen (RoHS compliant), impact modified, natural Information provided by Eurotec® |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | dry; ISO 1183 |
DSM EcoPaXX® Q-HG10 PA410-GF50 50% Glass Reinforced, Heat Stabilized |
|||
Density | 1.52 - 1.56 g/cc | 0.0549 - 0.0564 lb/in³ | ISO 1183 |
Fainplast Compounds Hax™ HF 215 Flame Retardant Polyolefin Cable Compound Thermoplastic halogen free flame retardant compound based on polyolefins and mineral fillersGrade description:High flame retardancy, improved processabilityInformation provided by Fainplast Compound.. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | MIL-S-8784 |
3M AC-215 Class B-1/2 Aerospace Sealant 3M Aerospace Sealant AC-215 Class B are two-part, polysulfide access door sealants for faying surfaces where easy separation of jointed surfaces is required. They are a highly thixotropic reddish pa.. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | MIL-S-8784 |
3M AC-215 Class B-2 Aerospace Sealant 3M Aerospace Sealant AC-215 Class B are two-part, polysulfide access door sealants for faying surfaces where easy separation of jointed surfaces is required. They are a highly thixotropic reddish pa.. |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ASTM D792 |
Beijing Chemical Industry KAIFA® 301-G10 PBT Resin 10% glass fiber reinforced, flame retardantInformation provided by Beijing Chemical Industry Research Institute (Group) |
|||
Density | 1.52 g/cc | 0.0549 lb/in³ | ISO 1183 |
Vyncolit Neopreg Kinel® SK4502 S8 Carbon Reinforced Molding Compound KINEL SK4502 S8 is a long carbon fiber reinforced BMI molding compound suited for very demanding tribological applications, high speeds and temperatures even under dry running conditions. Thermal ex.. |