Mechanical Properties | Metric | English | Comments |
---|---|---|---|
100% Modulus | 0.00690 GPa | 1.00 ksi | TPE-0153 (ASTM D 412) |
Advanced Elastomer Systems Santoprene® 153-38 Thermoplastic Rubber
(discontinued **) A black thermoplastic flame retardant elastomer with good fluid resistance, formulated to replace thermoset elastomers such as EPDM, polychloroprene, and chlorosulfonated polyethylene. It can be pr.. |
|||
100% Modulus | 0.00690 GPa | 1.00 ksi | |
Taiwan PU Corporation TPUI-E85 General Grade, Injection Molding Polyester Base TPU Thermoplastic Polyurethane (TPU), General Grade, Polyester Base, Injection MoldingInformation provided by Taiwan PU Corporation. |
|||
100% Modulus | 0.00690 GPa | 1.00 ksi | ASTM D412 |
Lubrizol ESTANE® 58244 Ether Based Thermoplastic Polyurethane Features: Non-Halogenated flame retardant compoundUses: Extrusion – wire and cable and general extrusion where flame retardant propertied are requiredAvailable in Americas, Europe, Middle East, Afr.. |
|||
100% Modulus | 0.00690 GPa | 1.00 ksi | ASTM D412 |
Lubrizol ESTANE® 58863 Ether Based Thermoplastic Polyurethane Features: Good Elasticity – High melt flow for easy processingUses: Extrusion – Wire and cable, general extrusionAvailable in Americas, Europe, Middle East, Africa, India and AsiaInformation provi.. |
|||
100% Modulus | 0.00690 GPa | 1.00 ksi | ASTM D412 |
Lubrizol ESTANE® 58887 Ether Based Thermoplastic Polyurethane Features: Excellent hydrolysis resistance, low temperature performance, clarity and wide processing window for extrusion.Uses: Blown and flat die/cast film extrusion, Injection and blow molding; cab.. |
|||
100% Modulus | 0.00690 GPa | 1.00 ksi | ASTM D412 |
Lubrizol Estane® 2103-85AE Thermoplastic Polyurethane Elastomer Formerly PellethaneFeature: Film and profile resinAvailable in Americas, Europe, Middle East, Africa, India and AsiaData provided by LubrizolLubrizol acquired the Pellethane product line from Dow in.. |
|||
100% Modulus | 0.00690 GPa | 1.00 ksi | Press Cure 15 Minutes @ 188°C (370°F), Post Cure 24 Hours @ 250°C (482°F) |
3M Dyneon™ PFE 132TBZ High Temperature Perfluoroelastomer 3M™ Dyneon™ PFE 132TBZ is a technically advanced high temperature perfluorelastomer (HT PFE). It is designed to meet the challenges of higher temperature plasma applications. It is classified as F.. |
|||
100% Modulus | 0.00690 GPa | 1.00 ksi | Cured 7 min at 177°C and Post Cured 16 hr at 232°C |
DuPont Performance Polymers VTR 8525 (GBLT-S) Peroxide Cured Fluoroelastomer (FKM) Formulation
(discontinued FormulationVTR-8525 |