Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 17.0 MPa | 2470 psi | |
Plastcom SLOVALEN PQ 83 T 20 PP, 20% mineral filling FeaturesModified PP for injection moulding with the content of 20% mineral filling, uv stabilized. Increased rigidity, strength and thermal use up to 130°C depending on the talc content. Decreased .. |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | ISO 527 |
Nilit FRIANYL B63 CU90 Nylon 6.6 for injection molding, 90% copper filled Nylon 6.6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Tensile Strength at Break | >= 17.0 MPa | >= 2470 psi | ASTM D638 |
NIZHNEKAMSKNEFTEKHIM 825 High Impact Polystyrene Grade 825 is a high impact polystyrene for injection molding. The polymer's ability to be molded on fast cycles with minimal stresses results in outstanding impact retention. It is used in such ap.. |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | ISO 527-1, -2 |
LyondellBasell Hifaxâ„¢ HSBMR246 Thermoplastic Polyolefin Elastomer Description: Hifaxâ„¢ HSBMR246 medium high melt flow, 1,500 MPa flexural modulus, paintable, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an outstanding balance of physical pro.. |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | ISO 527-1, -2 |
LyondellBasell Hostacomâ„¢ BR712GC Polypropylene Copolymer Description: Hostacomâ„¢ BR712GC conventional melt flow, 1,300 MPa flexural modulus, UV-stabilized, mineral-filled polypropylene copolymer has an excellent balance of stiffness, impact and weathe.. |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | after 7days @113°C; UL 1581 |
SABIC Innovative Plastics NORYL WCD801A PPE-TPE Flexible, migration-improved, halogen free extrusion grade intended for evaluation in applications such as wire insulation and cable jacket. Flame performance capable of meeting UL VW1 requirements.. |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | after 7days @113°C; UL 1581 |
SABIC Innovative Plastics NORYL WCD801A PPE-TPE (Europe-Africa-Middle East) Flexible, migration-improved, halogen free extrusion grade intended for evaluation in applications such as wire insulation and cable jacket. Flame performance capable of meeting UL VW1 requirements.. |
|||
Tensile Strength at Break | >= 17.0 MPa | >= 2470 psi | |
Sibur Neva Polyvinyl Chloride (PVC) Shall correspond to control sample, approved in accordance with the established procedure. Pores, which can be seen by eyes, are not allowed. Plastic shall no burn at stop of worm extruder for a p.. |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | ASTM D638 |
SABIC Innovative Plastics LNP THERMOCOMP TH0600A PUR (Asia Pacific) LNP THERMOCOMP* TH0600A is a compound based on Polyurethane resin. Added features of this material include: High Specific Gravity. |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | 50 mm/min; ISO 527 |
SABIC Innovative Plastics NORYL WCD841U PPE-TPE Flexible, UV stabilized, halogen free extrusion grade for applications such as wire insulation and cable jacket. Good color stability after UV weathering per ASTM D4459. Light color capable. Flame r.. |
|||
Tensile Strength at Break | >= 17.0 MPa | >= 2470 psi | 250mm/min; ISO 527 |
Borealis SuperCOPO™ LH4201R Polyethylene Insulation Compound, Crosslinkable SuperCOPO™ LH4201R is a crosslinkable natural polyethylene compound, specially designed for insulation applications. Applications: SuperCOPO™ LH4201R is intended for insulation of XLPE power cabl.. |
|||
Tensile Strength at Break | >= 17.0 MPa | >= 2470 psi | ISO R 527 |
Fainplast Compounds AP 88 Flexible PVC, Flame Retardant Insulation General purposes |
|||
Tensile Strength at Break | >= 17.0 MPa | >= 2470 psi | ISO R 527 |
Fainplast Compounds FR 83/1 Flexible PVC, Insulation General purposes |
|||
Tensile Strength at Break | >= 17.0 MPa | >= 2470 psi | ISO R 527 |
Fainplast Compounds FR 90 Flexible PVC, Insulation General purposes |
|||
Tensile Strength at Break | >= 17.0 MPa | >= 2470 psi | ISO R 527 |
Fainplast Compounds GA 89 Flexible PVC, Flame Retardant Sheathing General purposes |
|||
Tensile Strength at Break | >= 17.0 MPa | >= 2470 psi | ISO R 527 |
Fainplast Compounds KL 77 Flexible PVC, Insulation for High Temperatures Lead Free Operating temperature 105°C |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | ISO R 527 |
Fainplast Compounds MPH 78 Medical Flexible PVC, Extrusion Tubolar apparatus |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | ISO R 527 |
Fainplast Compounds MPH 78/H Medical Flexible PVC, Extrusion Technical tubes no DOP |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | ASTM D638 |
Arkema Group LOTRYL® 24 MA 005 Copolymer Ethylene - Methyl Acrylate LOTRYL® 24 MA 005 is a random copolymer of ethylene and methyl acrylate made by high-pressure radicalar polymerisation process. Due to the high methyl acrylate content, LOTRYL® 24 MA 005 is a poly.. |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0334C40L Calcium Reinforced |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0336C30L Calcium Reinforced |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | ASTM D638 |
Aclo Accutech Polypropylene Homopolymer HP0336C40L Calcium Reinforced |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | ISO R 527 |
Addiplast Addilene PMD 50215 Polypropylene Copolymer High impact strength, high elongation at breakInformation provided by Addiplast. |
|||
Tensile Strength at Break | >= 17.0 MPa | >= 2470 psi | 250mm/min; ISO 527 |
Borealis Supercure™ LS4201S Polyethylene Insulation Compound, Crosslinkable Supercure™ LS4201S is a crosslinkable natural polyethylene compound, specially designed for insulation applications. Applications: Supercure™ LS4201S is intended for insulation of XLPE High Volta.. |
|||
Tensile Strength at Break | >= 17.0 MPa | >= 2470 psi | ISO R 527 |
Fainplast Compounds AP 92 Flexible PVC, Flame Retardant Insulation General purposes |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | ISO R 527 |
Fainplast Compounds MGS 89 Medical Flexible PVC, Injection Molding Connectors and special components |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | ASTM D638 |
Azdel SuperLite® SL551600-100 PP Resin Matrix / 55% Glass Fiber (5 mm Molded Thickness) AZDEL SuperLite® SL551600-100 is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the applic.. |
|||
Tensile Strength at Break | 17.0 MPa | 2470 psi | UL 1581 |
SABIC Innovative Plastics NORYL WCD835 PPE-TPE (Asia Pacific) Flexible, low odor, halogen free extrusion grade intended for evaluation in applications such as wire insulation and cable jacket. Flame performance capable of meeting UL VW1 requirements. 80C end.. |