Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | <= 32.0 MPa | <= 4640 psi | ISO/R527 |
Polykemi AB POLYfill PPH TS15010 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics LNP LUBRICOMP AI001XXH ABS LNP* Lubricomp* AI001XXH is a compound based on ABS containing 2% Silicone. Characteristics of this grade are: Healthcare and Internally Lubricated. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | ASTM D638 |
SABIC Innovative Plastics LNP LUBRICOMP AL002 ABS (Asia Pacific) LNP* LUBRICOMP* AL002 is a compound based on Acrylonitrile Butadiene Styrene resin containing PTFE. Added features of this material include: Internally Lubricated. |
|||
Tensile Strength at Break | <= 32.0 MPa | <= 4640 psi | ISO/R527 |
Polykemi AB POLYfill PPH T5020 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | ASTM D638 |
SABIC Innovative Plastics LNP LUBRICOMP AL002 ABS LNP LUBRICOMP* AL002 is a compound based on Acrylonitrile Butadiene Styrene resin containing 10% PTFE. Added features of this material include: Internally Lubricated. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | ASTM D638 |
3M Dyneon™ PFA 6505N Perfluoroalkoxy Fluorothermoplastic
(discontinued **) The excellent chemical temperature resistance of Dyneon™ 6500N PFA is available across a range of melt flow indices, for optimal processability. Dyneon™ PFA 6502N, the highest molecular weight gra.. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | ISO R 527 |
Fainplast Compounds RE 612 Rigid PVC, Extrusion Spiral pipes |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | ASTM D638 |
LG Chemical HI835HS PMMA, Impact Resistant Grade Molding granule designed for greater impact strength combined with the outstanding properties of conventional acrylic materialsFeatures: Excellent transparency and eleganceWeather resistance and che.. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | ISO 37 |
Huntsman AVALON® 90 ABR Thermoplastic Polyurethane Introduction: AVALON 90 ABR is a high performance polyester based thermoplastic polyurethane for injection molding. AVALON 90 ABR is part of the AVALON Performance Range and offers a premium soling .. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | ISO 37 |
Huntsman AVALON® 92 AE Thermoplastic Polyurethane Introduction: AVALON 92 AE is a general purpose polyester based thermoplastic polyurethane for injection molding. AVALON 92 AE is part of the AVALON Perform Range and offers a premium soiling materi.. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | Type I, 5 mm/min; ASTM D638 |
SABIC Innovative Plastics LNP STAT-KON FD000 PE LNP* STAT-KON* FD000 is an unfilled Polyethylene. Added feature of this grade is: Electrically Conductive. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | ASTM D 638 |
SABIC Innovative Plastics LNP Stat-loy K3000 Acetal Copoly LNP* Stat-loy* K3000 is a compound based on Acetal Copolymer resin containing Anti-Static. Added features of this material include: Antistat.This data was supplied by SABIC-IP for the Americas regi.. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | ASTM D 638 |
SABIC Innovative Plastics LNP Stat-loy K3000 Acetal Copoly (Asia Pacific) LNP* Stat-loy* K3000 is a compound based on Acetal Copolymer resin containing Anti-Static. Added features of this material include: Antistat.This data was supplied by SABIC-IP for the Asia Pacific .. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | Type I, 50 mm/min; ASTM D638 |
SABIC Innovative Plastics NORYL PPX PPX7110 PPE+PP (Asia Pacific) PPE+PP blend. High Impact, Good Heat Resistance |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | |
UBE B (Low-Cis) HIPS (n-DM = 0.03 wt % and PH-3H = 0.03 wt %) Description: UBE high impact polystyrene (HIPS).Information provided by UBE. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | ISO 527 |
Total 3802 Blue MDPE pipe, injection molding FINATHENE® 3802 Blue is a polyethylene copolymer based on C6 hexene as co-monomer and is produced by a continuous low pressure slurry polymerization process. FINATHENE® 3802 Blue is a blue polyeth.. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | ASTM D638 |
Eastman Eastar EN063 Polyester Eastar Polyester EN063 is a condensation polymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. Eastar Polyester EN063 is a homopolymer .. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | 50 mm/min; ISO 527 |
Chi Mei Polylac® PA-737 ABS - High Flow High flow, medium impact |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | 50 mm/min; ISO 527 |
Chi Mei Polylac® PA-746 ABS - High Flow High flow, medium impact |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | 50mm/min; ISO 527-2 |
Denka TP-803 Transparent Resin Polymer (MBS resin) Polymethacrylate Butadiene Styrene "TX Polymer" (methyl methacrylate styrene), MS resins as an alternative to acrylic resins, with low density, low moisture absorption, and good moldability, "TH Polymer/TP Polymer," MBS resins with a.. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | 50 mm/min; ISO 527 |
Chi Mei Polylac® PA-763 ABS - Flame Retardant F.R. High Heat Weather Resistant |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | ASTM D882 |
3M 25X126 Protective UV Tape 3M™ Protective UV Tape 25X126 is a black and white co-extruded polyethylene tape featuring limited UV resistance.Information provided by 3M |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | Conditioned 15 days at 23°C - 50% RH; ASTM D638 |
Arkema Group Pebax® 2533 SA 01 MED Polyether Block Amide (PEBA) Polyether block amide PEBAX® 2533 SA 01 MED is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and it is specially designed to meet t.. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | Conditioned; ISO R 527 |
Addiplast Addilene H 490 M10S Flame Retardant Polypropylene Flame retardant, mineral filled, with halogensInformation provided by Addiplast. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | ASTM D638 |
Asahi Glass Fluon® P-830UP PFA Perfluoropolymer Fluon® PFA is a copolymer of tetrafluoroethylene (C2F4) and perfluoroalkoxyethylene, which has excellent chemical, electrical, mechanical and surface properties. PFA retains many inherent character.. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | |
Plastcom SLOVALEN PH 82 T 20 PP, 20% mineral filling FeaturesModified homopolymer PP for injection moulding with the content of 20% mineral filling. Increased rigidity, strength and thermal use up to 130°C depending on the talc conte nt. Decreased sh.. |
|||
Tensile Strength at Break | <= 32.0 MPa | <= 4640 psi | ISO/R527 |
Polykemi AB POLYfill PPH TS15010 H VTUV1 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | ISO R 527 |
Fainplast Compounds RE 140/1 Rigid PVC, Extrusion Drain-pipes |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | ASTM-D638 |
Braskem HB0454HR HDPE Blow Molding Polyethylene Copolymer HB0454HR is a high-density polyethylene copolymer resin with average molecular weight produced by the Unipol® process. A bottle made with HB0454HR shows excellent processability, color, and superfi.. |
|||
Tensile Strength at Break | 32.0 MPa | 4640 psi | ASTM-D638 |
Braskem BS600 HDPE Blow Molding Polyethylene Copolymer BS600 resin is a high-density polyethylene (HDPE), bimodal copolymer offering an outstanding combination of impact resistance and environmental stress crack resistance (ESCR). It is thus recommended.. |