Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 6.50 MPa | 943 psi | ISO 37 |
Polyplastic TechnoTep B® 60 A Thermoplastic Elastomer, Mineral Filled Medium mineral filled, weather stabilityInformation provided by PolyPlastic Group. |
|||
Tensile Strength at Break | <= 6.50 MPa | <= 943 psi | ISO/R527 |
Polykemi AB POLYelast TPE Z500 Thermoplastic Elastomer, SEBS-based Information provided by Polykemi AB |
|||
Tensile Strength at Break | 6.50 MPa | 943 psi | ASTM D412 |
Sumitomo Chemical ESPOLEX® WT502 Thermoplastic Elastomer ESPOLEX® TPE Series is a group of thermoplastic elastomers produced by Sumitomo Chemical Company. Among its material advantages, ESPOLEX® TPE Series is distinguished by offering many low-densi.. |
|||
Tensile Strength at Break | 6.50 MPa | 943 psi | Die C; Cross direction; ASTM D412 |
Teknor Apex Sarlink® 4165 Thermoplastic Elastomer A highly engineered Thermoplastic Elastomer for use in demanding applications. Sarlink® 4165 is a low hardness grade possessing exceptional tensile strength, superior compression set, chemical re.. |
|||
Tensile Strength at Break | 6.50 MPa | 943 psi | Die C; Cross direction; ASTM D412 |
Teknor Apex Sarlink® 4465 Thermoplastic Elastomer A NSF certified, highly engineered Thermoplastic Elastomer for use in demanding applications. Sarlink® 4465 is a low hardness grade possessing exceptional tensile strength, superior compression s.. |
|||
Tensile Strength at Break | 6.50 MPa | 943 psi | ASTM D638 |
ELASTO UK Mediprene™ 660420M TPE, Medical Applications, 42A Hardness All Mediprene™ compounds are designed and manufactured for use in medical and pharmaceutical applications. In both medical and food contact areas, high application demands are found, such as:Low e.. |
|||
Tensile Strength at Break | 6.50 MPa | 943 psi | Across Flow; ASTM D412 |
ExxonMobil Santoprene® 8271-65 Thermoplastic Elastomer A soft, colorable, specialty, non-hygroscopic thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. It complies with FDA regulations for rubber articles intended for repeated .. |
|||
Tensile Strength at Break | <= 6.50 MPa | <= 943 psi | ISO/R527 |
Polykemi AB POLYelast TPE ZS606 Thermoplastic Elastomer, SEBS/SBS-based Information provided by Polykemi AB |