Polymer Property : Charpy Impact Unnotched = 11.0 J/cm² Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Charpy Impact Unnotched	11.0 J/cm² @Temperature -20.0 °C	52.3 ft-lb/in² @Temperature -4.00 °F	STN EN ISO 179
Plastcom SLOVALEN PC 78 FRD 1 Polypropylene Copolymer, Halogen Flame Retardant, UV Stabilized FeaturesModified copolymer PP with the possibility of changing the MFI within the interval 5 - 20 g/10min. Stabilized against the UV-radiation by the UV stabilizer on the HALS basis. Retarded with..
Charpy Impact Unnotched	11.0 J/cm² @Temperature -20.0 °C	52.3 ft-lb/in² @Temperature -4.00 °F	STN EN ISO 179
Plastcom SLOVAMID 6 FRC 2 LS Polyamide 6, Halogen Free Flame Retardant, Light Stabilization FeaturesLongterm external use is possible because of the material stabilization with the light stabilizers on the HALS basis. Meets the flammability in accordance with the norm DIN 4102 - B1. PA 6..
Charpy Impact Unnotched	11.0 J/cm² @Temperature -20.0 °C	52.3 ft-lb/in² @Temperature -4.00 °F	STN EN ISO 179
Plastcom SLOVAMID 6 FRC 2 Polyamide 6, Halogen Free Flame Retardant FeaturesPA 6 for injection moulding with increased flammability resistance with non-halogen flame retardant. Determined for electro-technical purposes. Excellent flow of the material predetermines..
Charpy Impact Unnotched	11.0 J/cm² @Temperature -20.0 °C	52.3 ft-lb/in² @Temperature -4.00 °F
Plastcom SLOVAMID 6 FRC 3 PA6, flame retardant FeaturesDetermined for electrotechnical use. Delivered in natural colour. PA 6 for injection moulding with increased flammability resistance, with nonhalogen and phosporus flame retardant. Excellent..
Charpy Impact Unnotched	11.0 J/cm² @Temperature 23.0 °C	52.3 ft-lb/in² @Temperature 73.4 °F
Plastcom SLOVAMID 66 OB PA66, optically brightened FeaturesPA 66 for injection moulding, optical brightened, for mouldings with high surface brightness, with increased toughness and modulus of elasticity in tension in comparison with the basic type...
Charpy Impact Unnotched	11.0 J/cm² @Temperature -20.0 °C	52.3 ft-lb/in² @Temperature -4.00 °F
Plastcom SLOVAMID 6 MI/2 PA6, improved strength FeaturesPA 6 with the content of thermoplastic kaoutchouc. Impacted, for mouldings with high toughness either at minus temperatures, suitable for external use, eg. ski shoes, sports and safety helme..
Charpy Impact Unnotched	11.0 J/cm² @Temperature 23.0 °C	52.4 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
DSM Akulon® K224-G8U (Cond.) 43% Glass Reinforced Nylon 6 (North America) (discontinued **) Description: The Akulon portfolio is engineered for optimum performance to suit different processing techniques and end use markets.Unfilled Extrusion ResinsAkulon resins are available with melt vis..
Charpy Impact Unnotched	11.0 J/cm² @Temperature 23.0 °C	52.4 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
DSM Akulon® K224-HG5 Nylon 6-25% Glass Reinforced (European and Asian Grade) (Cond) (discontinued **) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier ..
Charpy Impact Unnotched	11.0 J/cm² @Temperature -30.0 °C	52.3 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eU
DuPont Performance Polymers Zytel® 7335F NC010 Nylon 6 (Unverified Data**) Zytel® 7335F NC010 is a nucleated, lubricated polyamide 6 resin for injection molding.Information provided by DuPont Performance Polymers
Charpy Impact Unnotched	11.0 J/cm² @Temperature 23.0 °C	52.3 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
Akro-Plastic Akromid® S3 GF 30 4 (3552) PA 6.10 Dry, 30% Glass Filled (discontinued **) A characteristic property of AKROMID® S (PA 6.10) is that it has a renewable-resource content of up to 70 % and therefore fulfils the current definition of a bioplastic. The plant-based raw materia..
Charpy Impact Unnotched	11.0 J/cmÂ² @Temperature 23.0 Â°C	52.3 ft-lb/inÂ² @Temperature 73.4 Â°F	conditioned; ISO 179-1eU
Lanxess DurethanÂ® BKV 130 H3.0 DUS008 000000 Nylon 6, 30% Glass Fiber PA 6, glass fiber, injection molding, impact modified, heat-aged stabilizedInformation provided by LANXESS.
Charpy Impact Unnotched	11.0 J/cmÂ² @Temperature 23.0 Â°C	52.3 ft-lb/inÂ² @Temperature 73.4 Â°F	conditioned; ISO 179-1eU
Lanxess DurethanÂ® BKV 135 DUS008 000000 Nylon 6, 35% Glass Fiber PA 6, 35% glass fibers, injection molding, impact modifiedInformation provided by LANXESS.
Charpy Impact Unnotched	11.0 J/cmÂ² @Temperature 23.0 Â°C	52.3 ft-lb/inÂ² @Temperature 73.4 Â°F	Conditioned; ISO 179/1eU
Lanxess DurethanÂ® BKV 140 000000 Copolyamide, 40% Glass Fiber CoPA, injection molding grade, 40% glass fibers, elastomer-modified, electroplateable, higher notched impact strength and also higher energy absorption under biaxial impact load than BKV 40, even in..
Charpy Impact Unnotched	11.0 J/cmÂ² @Temperature 23.0 Â°C	52.3 ft-lb/inÂ² @Temperature 73.4 Â°F	Conditioned; ISO 179/1eU
Lanxess DurethanÂ® BKV 140 H2.0 900051 Copolyamide, 40% Glass Fiber CoPA, injection molding grade, 40% glass fibers, elastomer-modified, electroplateable, higher notched impact strength and also higher energy absorption under biaxial impact load than BKV 40, even in..
Charpy Impact Unnotched	11.0 J/cmÂ² @Temperature 23.0 Â°C	52.3 ft-lb/inÂ² @Temperature 73.4 Â°F	cond.; ISO 179-1eU
Lanxess DurethanÂ® BKV 50 000000 Nylon 6, Glass Fiber Reinforced PA 6, 50% glass fibers, injection moldingInformation provided by LANXESS.
Charpy Impact Unnotched	11.0 J/cmÂ² @Temperature 23.0 Â°C	52.3 ft-lb/inÂ² @Temperature 73.4 Â°F	Conditioned; ISO 179-1eU
Lanxess DurethanÂ® BKV 50 H3.0 000000 Nylon 6, 50% Glass Fibers PA 6, 50% glass fibers, injection molding, heat-ageing stabilized
Charpy Impact Unnotched	11.0 J/cmÂ² @Temperature -30.0 Â°C	52.3 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179
Styrolution NovodurÂ® H604 ABS Novodur H604 is a high heat injection molding grade with enhanced chemical resistance, especially suitable for being painted.Information provided by Styrolution
Charpy Impact Unnotched	11.0 J/cm² @Temperature -20.0 °C	52.3 ft-lb/in² @Temperature -4.00 °F	ISO 179/1eU
Borealis Daplen™ EE168AI Polypropylene TPO Compound Daplen™ EE168AI is a 10% mineral filled polypropylene compound intended for injection molding. This material has an excellent balance between impact strength and stiffness and is easy to process. ..
Charpy Impact Unnotched	11.0 J/cm² @Temperature 23.0 °C	52.3 ft-lb/in² @Temperature 73.4 °F	ISO 179
Polyram PlusTek PA313G43 Nylon 66 for Injection Molding, 43% Glass Fiber Reinforced, Heat Stabilized Heat stabilized, 43% Glass fiber reinforced Nylon 6.6 for injection molding applications.Information provided by Polyram.
Charpy Impact Unnotched	11.0 J/cm² @Temperature 23.0 °C	52.4 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
DSM Akulon® K224-HG6 (Cond.) 30% Glass Reinforced Nylon 6 (North America) Description: The Akulon portfolio is engineered for optimum performance to suit different processing techniques and end use markets.Unfilled Extrusion ResinsAkulon resins are available with melt vis..
Charpy Impact Unnotched	11.0 J/cm² @Temperature 23.0 °C	52.4 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
DSM Akulon® K224-HG6 Nylon 6-30% Glass Reinforced (European and Asian Grade) (Cond) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier ..
Charpy Impact Unnotched	11.0 J/cm² @Temperature 23.0 °C	52.4 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
DSM Akulon® K224-HG6U (Cond.) 33% Glass Reinforced Nylon 6 (North America) Description: The Akulon portfolio is engineered for optimum performance to suit different processing techniques and end use markets.Unfilled Extrusion ResinsAkulon resins are available with melt vis..
Charpy Impact Unnotched	11.0 J/cm² @Temperature 23.0 °C	52.4 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
DSM Akulon® K224-HG7 Nylon 6-35% Glass Reinforced (European Grade) (Cond) The Akulon® product portfolio is engineered for optimum performance to suit different processing techniques and end use markets. Akulon Nylon 6 is used for extrusion applications including barrier ..
Charpy Impact Unnotched	11.0 J/cm² @Temperature 23.0 °C	52.3 ft-lb/in² @Temperature 73.4 °F	cond; ISO 179/1eU
DSM Akulon® K224-LG6 /E PA6-GF30 30% Glass Reinforced, Injection Molding, Improved UV-stability
Charpy Impact Unnotched	11.0 J/cm² @Temperature 23.0 °C	52.3 ft-lb/in² @Temperature 73.4 °F	dry; ISO 179/1eU
DSM Novamid® 3021GH30 NAT PA66-GF30 30% Glass Reinforced, Heat Stabilized
Charpy Impact Unnotched	11.0 J/cm² @Temperature 23.0 °C	52.3 ft-lb/in² @Temperature 73.4 °F	cond; ISO 179/1eU
DSM Stanyl® OCD2300 BLK PA46-GF50 50% Glass Reinforced, Heat Stabilized
Charpy Impact Unnotched	11.0 J/cm² @Temperature -30.0 °C	52.3 ft-lb/in² @Temperature -22.0 °F	ISO 179
Ascend Performance Materials Vydyne® R220 Nylon 66, 40% mineral reinforced, DAM Vydyne® R220 is a 40% mineral-reinforced PA66 resin formulated for improved impact strength. Available in natural, it is an injection-molding grade formulated to retain the inherent processing adva..
Charpy Impact Unnotched	11.0 J/cm² @Temperature 23.0 °C	52.3 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eU
BASF Ultramid® B3ZG8 BK 20560 40% Glass Filled PA6-1 (Dry) Description: Impact-modified and 40% glass-fiber reinforced injection-molding grade for technical articles of very high stiffness and toughness, for instance, for vehicle airbag housings and suitcas..
Charpy Impact Unnotched	11.0 J/cm² @Temperature 23.0 °C	52.3 ft-lb/in² @Temperature 73.4 °F
Radici Radilon® A RV500 (dry) Nylon 66 Radilon® A is a range of polyamide 66 (PA66) products obtained through the polymerization of hexamethylendiamine and adipic acid, and used for injection, extrusion and blow-molding.Information prov..