Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tear Strength | 10.5 kN/m | 59.9 pli | ASTM D624B |
P & P Technology CB 50 Carbon Loaded Silicone Applications: Electrically conductive grades which when properly catalyzed can be considered for applications requiring conductivity such as EMI gaskets, conductive sheaths for ignition cable core,.. |
|||
Tear Strength | 10.5 kN/m | 59.9 pli | |
Parker Chomerics CHO-MUTE 9000 Microwave Absorber Microwave Absorber Material. Elastomer microwave absorber is designed to offer wide band attenuation within operating frequencies of 500 MHz to 18 GHz. CHO-MUTE 9000 incorporates a high tech silicon.. |
|||
Tear Strength | <= 10.5 kN/m | <= 60.0 pli | ASTM D624 |
Parker Chomerics CHO-SEAL® 0862 Conductive Elastomer Description: Low-end shielding and ESD protection; high tensile strength; no corrosion or fluid resistance.Extruded onlyRoHS CompliantInformation provided by Chomerics |
|||
Tear Strength | 10.5 kN/m | 60.0 pli | ASTM D624 |
Parker Chomerics Tecknit SC-Consil® 864 Carbon-Filled Silicone Elastomer Description: SC-CONSIL is a silicone elastomer filled with carbon particles. It provides superior shielding and a reliable environmental seal. The combination of carbon particles and silicone allows.. |
|||
Tear Strength | <= 10.5 kN/m | <= 60.0 pli | ASTM D624 |
Parker Chomerics CHO-SEAL® 6307 Conductive Elastomer Description: Good performance in moderately corrosive environments; excellent NBC fluid resistance; good physical properties.Molded onlyRoHS CompliantInformation provided by Chomerics |
|||
Tear Strength | 10.5 kN/m | 60.0 pli | Initial Tear Strength |
Saint-Gobain CHR® TH Skived PTFE Film Backing Silicone Adhesive Pressure Sensitive Tape Description: PTFE films provide a conformable release surface and exhibit a remarkably low coefficient of friction and non-stick properties. PTFE films have high temperature resistance and are virtu.. |
|||
Tear Strength | 10.5 kN/m | 60.0 pli | Initial Tear Strength; ASTM D624 |
Saint-Gobain COHRlastic® 700 General Purpose Silicone Solid Rubber Description: COHRlastic® solid silicone rubber in square sheet and continuous length form has a smooth, blemish-free surface. It is available in degrees of hardness from relatively soft 30 durome.. |
|||
Tear Strength | 10.5 kN/m | 60.0 pli | ASTM D624 |
Teknor Apex UNIPRENE® 2023 Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
Tear Strength | 10.5 kN/m | 59.9 pli | ASTM D624 |
Teknor Apex Uniprene® UN-2533A Thermoplastic Vulcanizate Notes: Injection Rate: Fast Uses: Expansion Joint; Grommets; Tubing; Gaskets; Plugs; Weatherstripping; Glazing; Shock Absorbing Pads Forms: Pellets Processing Method: Extrusion; Injection Molding Ex.. |
|||
Tear Strength | 10.5 kN/m | 60.0 pli | Side 2; ASTM D624 |
Arlon 18646B026 0.026" (0.66 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate Design/Construction:Side 1: Cured Silicone RubberSubstrate: 11523 Style FiberglassSide 2: Uncured Silicone RubberInterleave: PolyethyleneThis data represents typical values for the production materi.. |
|||
Tear Strength | 10.5 kN/m | 60.0 pli | Side 2 Silicone Property; ASTM D624 |
Arlon 19646B025 Silicone Rubber/Fiberglass Laminate Side 1:cured silicone rubber; Substrate: 1523 fiberglass; Side 2: uncured silicone rubber; Interleave: 3 mil Polyethylene |
|||
Tear Strength | 10.5 kN/m | 59.9 pli | ASTM D624 |
Parker Chomerics CHO-MUTE 9005 Microwave Absorber Microwave Absorber Material. Elastomer microwave absorber is designed to offer wide band attenuation within operating frequencies of 500 MHz to 18 GHz. CHO-MUTE 9005 incorporates a high tech silicon.. |
|||
Tear Strength | 10.5 kN/m | 60.0 pli | Die C (graves), 20 in/min; ASTM D624 |
PolyOne Synprene® RT-3630 Thermoplastic Elastomer - SBC
(discontinued **) Description/Features:Multi-Purpose Thermoplastic ElastomerNaturalApplications:General PurposeInteriorMarket:Consumer GoodsIndustrialProcessing Method:Injection MoldingPolyOne First ChoiceInformation.. |
|||
Tear Strength | 10.5 kN/m | 60.0 pli | Initial Tear Strength; ASTM D624 Die C |
Saint-Gobain Lo-Skid® LS7000/LS7100 Series High Density Bumper and Footpad Urethane Foam Description: Lo-Skid™ LS7000 and LS7100 (acrylic adhesive on one side) urethane foam products are widely recommended for bumpers and footpads for applications and electronic products because it pro.. |
|||
Tear Strength | 10.5 kN/m | 60.0 pli | Die C (graves), 20 in/min; ASTM D624 |
PolyOne Synprene® RT-3720 Thermoplastic Elastomer - SBC, Mineral Filled
(discontinued **) Description/Features:Multi-Purpose Thermoplastic ElastomerMineral FilledNaturalApplications:General PurposeMarket:Consumer GoodsIndustrialBuilding and ConstructionProcessing Method:Injection Molding.. |