Polymer Property : CTE, linear = 11.0 µm/m-°C Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Thermal Properties	Metric	English	Comments
CTE, linear	11.0 µm/m-°C @Temperature 350 °C	6.11 µin/in-°F @Temperature 662 °F
Mykroy/Mycalex MM 400 Machining Grade Glass-bonded Mica Composite Natural mica filler. Does not burn. Good radiation resistance (3 x 10^10 Rads-Cobalt).This ceramoplastic material is a versatile and efficient insulating material designed to meet the exacting dem..
CTE, linear	11.0 µm/m-°C @Temperature -55.0 - 288 °C	6.11 µin/in-°F @Temperature -67.0 - 550 °F	X-Direction; ASTM D3386-94
Rogers Corporation RO4835 Hydrocarbon Ceramic Laminate, Improved Oxidation Resistance Features and Benefits:Significantly improved oxidation resistance compared to typical thermoset microwave materialsDesigned for performance sensitive, high volume applicationsLow loss - Excellent el..
CTE, linear	11.0 µm/m-°C @Temperature 20.0 - 250 °C	6.11 µin/in-°F @Temperature 68.0 - 482 °F
Resistalloy International Fecralloy™ 145 Electrical Resistance Steel Ferritic stainless steel with aluminum. Available as wire. Used mainly for electrical elements in both industrial and domestic applications. Industrial applications vary from small laboratory kiln..
CTE, linear	11.0 µm/m-°C @Temperature 100 - 200 °C	6.11 µin/in-°F @Temperature 212 - 392 °F	Axial; ASTM E831
Solvay Specialty Polymers Ryton® BR42B Polyphenylene Sulfide Compound (Unverified Data**) Natural Color Polyphenylene Sulfide CompoundRyton® BR42B is a 40% fiberglass reinforced polyphenylene sulfide compound specially formulated to have a low coefficient of friction for use in low surf..
CTE, linear	11.0 µm/m-°C @Temperature 100 - 200 °C	6.11 µin/in-°F @Temperature 212 - 392 °F	Axial; ASTM E831
Solvay Specialty Polymers Ryton® R-7-120BL Polyphenylene Sulfide Compound (Unverified Data**) Black Polyphenylene Sulfide CompoundRyton® R-7-120BL is an advanced glass/mineral filled polyphenylene sulfide compound developed to provide good weldline strength and low maintenance molding using..
CTE, linear	11.0 Âµm/m-Â°C @Temperature 20.0 - 100 Â°C	6.11 Âµin/in-Â°F @Temperature 68.0 - 212 Â°F
International Mold Steel Daido DRM2 Matrix High-Speed Steel This matrix type high speed tool steel is available for warm and cold forging tools where critical performance is required. DRM2 prolongs service life due to its higher hardness and toughness than t..
CTE, linear	11.0 Âµm/m-Â°C @Temperature 20.0 - 200 Â°C	6.11 Âµin/in-Â°F @Temperature 68.0 - 392 Â°F
Industeel VIRGO 39 16% Cr, 5% Ni, Martensitic Stainless Steel Description: Virgo 39 is a 16% Cr, 5% Ni, 1% Mo low carbon martensitic stainless steel. The grade is specially designed to combine high mechanical properties including toughness and improved corrosi..
CTE, linear	11.0 Âµm/m-Â°C @Temperature 20.0 - 100 Â°C	6.11 Âµin/in-Â°F @Temperature 68.0 - 212 Â°F
Industeel CLC 1.2316 Prehardened (300HB) and Corrosion Resistant Mold Steel Description: CLC 1.2316 is a 16%Cr 1% Mo with improved corrosion resistance properties, thanks to the chromium/molybdenum additions. The high cleanliness/homogeneity of the steel makes it specially ..
CTE, linear	11.0 Âµm/m-Â°C @Temperature 20.0 - 100 Â°C	6.11 Âµin/in-Â°F @Temperature 68.0 - 212 Â°F
Industeel CLC 1.2316S Prehardened Mold Steel (300HB) with Improved Machinability Description: CLC 1.2316 S grade is a 16%Cr 1%Mo mold steel with improved corrosion resistance properties, thanks to the chromium and molybdenum additions. Furthermore specific sulfur additions are c..
CTE, linear	11.0 Âµm/m-Â°C @Temperature 20.0 - 200 Â°C	6.11 Âµin/in-Â°F @Temperature 68.0 - 392 Â°F
Industeel SOLEIL A2 13% Cr High Strength Martensitic Stainless Steel (QT550 Heat Treatment) Description: Soleil A2 has combined Chromium (~13%) and Carbon ~0.10%) additions to provide an excellent combination of high mechanical properties and improved corrosion resistance properties. The g..
CTE, linear	11.0 µm/m-°C @Temperature 20.0 - 1000 °C	6.11 µin/in-°F @Temperature 68.0 - 1830 °F	DIN EN 821-1
CeramTec ZN 40 Zirconia, ZrO2-MgO ZN 40 is a zirconium oxide ceramic with an excellent surface finish and a higher strength than aluminum oxide. Its good crack resistance and anti-friction properties, combined with steel-like therma..
CTE, linear	11.0 µm/m-°C @Temperature 20.0 - 199 °C	6.10 µin/in-°F @Temperature 68.0 - 390 °F
EDRO #8 Premium 420 Stainless Mold Steel EDRO #8™ is a chromium-alloyed stainless tool steel with the following properties: excellent corrosion resistance, superior polishability, good wear resistance, good machinability, and stability in..
CTE, linear	11.0 µm/m-°C @Temperature 21.1 - 93.3 °C	6.10 µin/in-°F @Temperature 70.0 - 200 °F
Crucible Steel CHRO-MOW® Tool Steel, AISI H12 Chro-Mow is a general purpose hot work tool steel, combining good high-temperature strength with moderate toughness and heat check resistance. It is suited for applications where drastic coolants ar..
CTE, linear	11.0 µm/m-°C @Temperature 21.1 - 93.3 °C	6.10 µin/in-°F @Temperature 70.0 - 200 °F
Crucible Steel CPM® Nu-Die® EZ Tool Steel CRUCIBLE CPM Nu-Die EZ is a new, patented die and mold steel designed for service as die casting dies and plastic injection molds. It is supplied in the prehardened condition, and is easily machined..
CTE, linear	11.0 µm/m-°C @Temperature 20.0 - 425 °C	6.11 µin/in-°F @Temperature 68.0 - 797 °F
Crucible Steel CPM® REX® 66 (HS) High Speed Steel CPM Rex 66 is a super high speed steel made by the Crucible Particle Metallurgy (CPM) process. It is a tungsten type high speed with a high vanadium content for excellent abrasion resistance, simila..
CTE, linear	11.0 µm/m-°C @Temperature 100 °C	6.11 µin/in-°F @Temperature 212 °F
Bohler-Uddeholm BÖHLER S401(M1) High Speed Steel Description: Molybdenum high speed steel with high toughness and good cutting ability. Applications: Taps, twist drills, reamers, milling tools, broaches toolsStandards: DIN/EN 1.3346 HS2-91, AISI M..
CTE, linear	11.0 µm/m-°C @Temperature 25.0 - 300 °C	6.11 µin/in-°F @Temperature 77.0 - 572 °F
Carpenter Chrome Core® 12 Alloy Data provided by Carpenter Technology Corporation.Chrome Core® alloys are a family of controlled chemistry, ferritic 8 and 12% chromium-iron alloys which are candidates for use in magnetic componen..
CTE, linear	11.0 µm/m-°C @Temperature 20.0 - 200 °C	6.11 µin/in-°F @Temperature 68.0 - 392 °F
Assab Steels ASSAB XW-5 Cold Work Steel ASSAB XW-5 is a high-carbon, high chromium tool steel alloyed with tungsten, characterized by:High wear resistanceHigh compressive strengthHigh surface hardness after hardeningGood through-hardening..
CTE, linear	11.0 µm/m-°C @Temperature 20.0 - 250 °C	6.11 µin/in-°F @Temperature 68.0 - 482 °F
Resistalloy International Fecralloy™ 135 Electrical Resistance Steel Ferritic stainless steel with aluminum. Available as wire, bar, and strip. Used mainly for electrical elements in both industrial and domestic applications. Industrial applications vary from small ..
CTE, linear	11.0 µm/m-°C @Temperature 20.0 - 250 °C	6.11 µin/in-°F @Temperature 68.0 - 482 °F
Resistalloy International Fecralloy™ Electrical Resistance Steel Yttrium addition does not appear in nominal composition. Ferritic stainless steel with aluminum. Available as wire, bar, tube, and strip. Used mainly for electrical elements in both industrial and..
CTE, linear	11.0 µm/m-°C @Temperature 100 - 200 °C	6.11 µin/in-°F @Temperature 212 - 392 °F	Axial; ASTM E831
Chevron Phillips Ryton® R-7 02 Polyphenylene Sulfide Compound (discontinued **) Black Polyphenylene Sulfide CompoundRyton® R-7 02 is polyphenylene sulfide compounded with glass fibers and mineral fibers to produce an injection moldable high temperature engineering compound wit..