Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 200 °C |
6.50 µin/in-°F @Temperature 68.0 - 392 °F |
|
Kennametal Stellite Nucalloy® 453 High-Silicon Nickel-Base Hardfacing Alloy Applications include chemical control valves, nuclear globe valves, nuclear gate valves, nuclear sliding parts, and pressure bars for plywood cutters.Nucalloy® alloys are unique, patented, high-s.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 300 °C |
6.50 µin/in-°F @Temperature 68.0 - 572 °F |
|
International Mold Steel Daido DRM1 Matrix High-Speed Steel This tough matrix type high speed tool steel features high hardness and high tough Matrix type high speed tool steel vastly surpasses hot work die steels. DRM1 improves hot and warm die life by its .. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 538 °C |
6.50 µin/in-°F @Temperature 68.0 - 1000 °F |
|
Latrobe LSSâ„¢ 420 MQ Plastic Mold Steel (AISI 420) TLS 420 MQ is a highly-refined, Mold Quality stainless steel that is engineered to exhibit excellent polishability, good corrosion resistance, and good wear resistance. TLS 420 MQ is melted using an.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 538 °C |
6.50 µin/in-°F @Temperature 68.0 - 1000 °F |
|
Latrobe LSSâ„¢ 420 Supreme Plastic Mold Steel (AISI 420) TLS 420 Supreme is a specially-refined, mold-quality stainless steel that is engineered to provide supreme polishability, good corrosion resistance, and good wear resistance. TLS 420 supreme is manu.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 27.0 - 204 °C |
6.50 µin/in-°F @Temperature 80.6 - 399 °F |
|
Latrobe LSSâ„¢ H12 Hot Work Tool Steel (ASTM H12) TLS H12 hot work tool steel is a 5% chromium, general-purpose hot work steel that is characterized by excellent impact toughness. It contains less vanadium than the widely-used H13 hot work tool ste.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 538 °C |
6.50 µin/in-°F @Temperature 68.0 - 1000 °F |
|
HP Alloys Alloy B-2, Solution Treated, 10% Cold Worked Solution Treated, 10% Cold Worked applies to tensile and/or hardness; other properties are typical of this alloy.Data provided by High Performance Alloys, Inc. and Haynes International. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 538 °C |
6.50 µin/in-°F @Temperature 68.0 - 1000 °F |
|
HP Alloys Alloy B-2, Solution Treated, 30% Cold Worked Solution Treated, 30% Cold Worked applies to tensile and/or hardness; other properties are typical of this alloy.Data provided by High Performance Alloys, Inc. and Haynes International. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 538 °C |
6.50 µin/in-°F @Temperature 68.0 - 1000 °F |
|
HP Alloys Alloy B-2, Solution Treated, 40% Cold Worked Solution Treated, 40% Cold Worked applies to tensile and/or hardness; other properties are typical of this alloy.Data provided by High Performance Alloys, Inc. and Haynes International. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 100 °C |
6.50 µin/in-°F @Temperature 68.0 - 212 °F |
|
HP Alloys Alloy C-276, 10% Cold Worked 10% Cold Worked applies to tensile and/or hardness; other properties are typical of this alloy.Data provided by High Performance Alloys, Inc., Allvac, Inco Alloys International, and Haynes Internati.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 100 °C |
6.50 µin/in-°F @Temperature 68.0 - 212 °F |
|
HP Alloys Alloy C-276, 50% Cold Worked 50% Cold Worked applies to tensile and/or hardness; other properties are typical of this alloy.Data provided by High Performance Alloys, Inc., Allvac, Inco Alloys International, and Haynes Internati.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 432 °C |
6.50 µin/in-°F @Temperature 68.0 - 810 °F |
|
Schmolz + Bickenbach UgiPermâ„¢ 12FM Stainless Steel Bar Description: UgiPermâ„¢ 12FM is a 12% chrome ferritic stainless with improved magnetic properties designed for use in electro-injectors, valves and many other applications. The grade was develope.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 1000 °C |
6.50 µin/in-°F @Temperature 68.0 - 1830 °F |
DIN EN 821-1 |
CeramTec MZ 111 HIP Zirconia, ZrO2-Y2O3 MZ 111 HIP is a yttria-stabilized tetragonal zirconia ceramic. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 1000 °C |
6.50 µin/in-°F @Temperature 68.0 - 1830 °F |
DIN EN 821-1 |
CeramTec MZ 111 Zirconia, ZrO2-Y2O3 MZ 111 is a yttria-stabilized tetragonal zirconia used in dental applications. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 399 °C |
6.50 µin/in-°F @Temperature 68.0 - 750 °F |
|
EDRO UltraChem® #15 Precipitation Hardening Stainless Mold Steel Ultrachem® is a chromium-nickel precipitation-hardening stainless steel, a modified PH alloy grade, which is characterized by: exceptional corrosion resistance, uniform hardness in all dimensions, .. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 399 °C |
6.50 µin/in-°F @Temperature 68.0 - 750 °F |
|
EDRO UltraChem® ESR #16 Precipitation Hardening Stainless Mold Steel Ultrachem ESR® is a chromium-nickel precipitation-hardening stainless steel, a modified PH alloy grade, which is characterized by exceptional polishability, exceptional corrosion resistance, unifor.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 0.000 - 649 °C |
6.50 µin/in-°F @Temperature 32.0 - 1200 °F |
|
Crucible Steel 416 Plus Chromium Steel Crucible 416 Plus is a hardenable chromium steel to which elements have been added to improve machinability and non-galling characteristics. Better machinability than that of standard AISI Type 4.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 21.1 - 204 °C |
6.50 µin/in-°F @Temperature 70.0 - 400 °F |
|
Crucible Steel CHRO-MOW® Tool Steel, AISI H12 Chro-Mow is a general purpose hot work tool steel, combining good high-temperature strength with moderate toughness and heat check resistance. It is suited for applications where drastic coolants ar.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 21.1 - 260 °C |
6.50 µin/in-°F @Temperature 70.0 - 500 °F |
|
Crucible Steel WR-95 Tool Steel, AISI H10 Modified WR-95 is a modified H10, with cobalt added to improve its high temperature properties. It is an upgrade from H13 in applications requiring improved hot hardness or heat check resistance, at a slight.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 500 °C |
6.50 µin/in-°F @Temperature 68.0 - 932 °F |
|
Bohler-Uddeholm BÖHLER M303 EXTRA Plastic Mold Steel BOHLER M303 EXTRA is a stainless martensitic chromium steel, offering excellent toughness, corrosion and wear resistance. It is characterized by improved machinability and polishability. BOHLER M303.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 200 °C |
6.50 µin/in-°F @Temperature 68.0 - 392 °F |
|
Bohler-Uddeholm BÖHLER S601 (M2 Modified) High Speed Steel For Cold Work Applications Properties: Tungs ten-molybdenum high speed steel with ex cel lent toughness and cut ting proper ties, for a wide variety of uses.Applications: Taps, twist drills, reamers, broaching tools, meta.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 200 °C |
6.50 µin/in-°F @Temperature 392 °F |
|
Bohler-Uddeholm BÖHLER S692/S693 MICROCLEAN® PM M4 High Speed Steel Description: S692/S693 MICROCLEAN are high-sulfur and low sulfur versions of high-carbon PM M4 high speed steel that is produced using state-of-the-art “Generation 3” powder processing technology... |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 400 °C |
6.50 µin/in-°F @Temperature 752 °F |
hardened to 58 HRC |
Bohler-Uddeholm UDDEHOLM ELMAX® Powder Metallurgy Stainless Mold Steel High chromium-vanadium-molybdenum alloyed steelA through-hardening corrosion resistant mold steel made by powder metallurgy processing techniques. The high wear resistance makes ELMAX® suitable for.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 399 °C |
6.50 µin/in-°F @Temperature 750 °F |
hardened to 60 HRC |
Bohler-Uddeholm UDDEHOLM VANADIS 4 EXTRA® Powder Metallurgically Produced Tool Steel Description: Uddeholm Vanadis 4 Extra is a chromiummolybdenum-vanadium alloyed steel Vanadis 4 Extra is characterized by: Very good ductility High abrasive-adhesive wear resistance High compressive.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature <=427 °C |
6.50 µin/in-°F @Temperature <=801 °F |
|
AK Steel 15-5 PH® Precipitation Hardening Stainless Steel, Condition H 900 AK Steel 15-5 PH® provides high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), and good toughness in both base metal and welds. Short-time, .. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 °C |
6.50 µin/in-°F @Temperature 68.0 °F |
|
Assab Steels CALMAX Plastic Mold Material CALMAX is a chromium-molybdenum-vanadium alloyed steel characterized by:High toughnessGood wear resistanceGood through hardening propertiesGood dimensional stability in hardeningGood polishabilityGo.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 20.0 - 800 °C |
6.50 µin/in-°F @Temperature 68.0 - 1470 °F |
|
Advanced Ceramics ACL 2087 Lithium Alumino-Silicate A high strength glass-ceramic suitable for sealing to 17% chrome-iron or Nilo 48Information provided by Advanced Ceramics Limited (ACL) |
|||
CTE, linear | 11.7 µm/m-°C @Temperature <=427 °C |
6.50 µin/in-°F @Temperature <=801 °F |
|
AK Steel 17-4 PH® Precipitation Hardening Stainless Steel, Condition H 900 AK Steel 17-4 PH® provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), and good toughness in both base.. |
|||
CTE, linear | 11.7 µm/m-°C @Temperature 21.1 - 204 °C |
6.50 µin/in-°F @Temperature 70.0 - 400 °F |
|
Schmolz + Bickenbach Cryodur® 2510 (O-1) Cold Work Die Steel Description: Cyrodur ® 2510 is a single melt Extra Fine Structure (EFS) material; and Supplied in the soft annealed conditionCharacteristics: Excellent dimensional stability during heat treatment; .. |