- HOME
- POLYMER SEARCH
- Polymer Property : Brittleness Temperature = -76.0 °F
Polymer Property : Brittleness Temperature = -76.0 °F Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Brittleness Temperature | <= -60.0 °C | <= -76.0 °F | ASTM D746 |
| Polimeri Europa Eraclene® ML 74 High Density Polyethylene - Injection Molding Eraclene ML 74 is a high density polyethylene resin (HDPE) with antioxidants, suitable for injection molding application.Its narrow molecular weight distribution leads to high mechanical properties .. |
|||
| Brittleness Temperature | <= -60.0 °C | <= -76.0 °F | ASTM D746 |
| Polimeri Europa Eraclene® MR 80 High Density Polyethylene - Injection Molding Eraclene MR 80 is a high density polyethylene resin (HDPE) with antioxidants, suitable for injection molding application. Eraclene MR 80 shows a good balance between processability and mechanical p.. |
|||
| Brittleness Temperature | -60.0 °C | -76.0 °F | ASTM D746 |
| ExxonMobil Santoprene® 221-55 Thermoplastic Elastomer
(discontinued **) A soft, colorable, UV resistant thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide.. |
|||
| Brittleness Temperature | <= -60.0 °C | <= -76.0 °F | TPE-0089 (ASTM D 746) |
| ExxonMobil Vyram™ 9271-65 Thermoplastic Rubber
(discontinued **) A colorable thermoplastic elastomer which complies with FDA regulations for rubber articles intended for repeated use, as well as rubber articles in contact with non-fatty, non-oily foods as closure.. |
|||
| Brittleness Temperature | -60.0 °C | -76.0 °F | |
| Momentive Performance Materials RTV5812 One-Component, Modified Alkoxy Adhesive Sealant, White RTV5810 Series sealants are neutral cure, one-component, ready to use silicone adhesive sealants that cure to tough resilient silicone rubber on exposure to atmospheric moisture at room temperature... |
|||
| Brittleness Temperature | <= -60.0 °C | <= -76.0 °F | ASTM D746 |
| SCG Chemicals EL-Leneâ„¢ D682PC Low Density Polyethylene Pipe Resin Key Characteristics: High flexibility, good processingRecommended Applications: Irrigation pipesInformation provided by SCG Chemicals |
|||
| Brittleness Temperature | -60.0 °C | -76.0 °F | ASTM D746 |
| Teknor Apex Telcar® TL-1050-75 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets P.. |
|||
| Brittleness Temperature | <= -60.0 °C | <= -76.0 °F | ASTM D746 |
| Teknor Apex UNIPRENE® 7010-87 Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
| Brittleness Temperature | <= -60.0 °C | <= -76.0 °F | ASTM D746 |
| Teknor Apex UNIPRENE® 7100-87 Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
| Brittleness Temperature | -60.0 °C | -76.0 °F | ASTM D746 |
| Teknor Apex Uniprene® UN-7010-80NT Thermoplastic Vulcanizate Notes: Injection Rate: Fast Uses: Gaskets; Glazing; Grommets; Medical Pump Seals; Medical/Healthcare Applications; Plugs; Shock Absorbing Pads; Tubing Agency Ratings: NSF 61 Forms: Pellets Processin.. |
|||
| Brittleness Temperature | -60.0 °C | -76.0 °F | JIS K6301 |
| Toyobo PELPRENE™ PE450B Polyester TPE Features: Polyester TPEInformation provided by Toyobo. |
|||
| Brittleness Temperature | -60.0 °C | -76.0 °F | JIS K6301 |
| Toyobo PELPRENE™ S6002 Polyester TPE, Ultra Heat-resistant Features: Polyester TPE, Ultra Heat-resistantInformation provided by Toyobo. |
|||
| Brittleness Temperature | -60.0 °C | -76.0 °F | ASTM D 746 |
| Zylog Neoplast® 180 FT EB Thermoplastic Vulcanizate Neoplast 180 FT EB is a soft, dynamically vulcanized thermoplastic vulcanizate (TPV), based on polyolefin chemistry, and is intended for Injection Molding, Blow Molding and Extrusion applications.Ro.. |
|||
| Brittleness Temperature | <= -60.0 °C | <= -76.0 °F | ASTM D746 |
| Teknor Apex Telcar® TL-8732R Thermoplastic Elastomer Notes: RoHS Compliant Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstri.. |
|||
| Brittleness Temperature | <= -60.0 °C | <= -76.0 °F | ASTM D746 |
| Teknor Apex Uniprene® UN-7100-73 Thermoplastic Vulcanizate Notes: Injection Rate: Fast Uses: Expansion Joint; Grommets; Tubing; Gaskets; Plugs; Weatherstripping; Glazing; Shock Absorbing Pads Forms: Pellets Processing Method: Extrusion; Injection Molding Ex.. |
|||
| Brittleness Temperature | <= -60.0 °C | <= -76.0 °F | ISO 974 |
| Borealis Casico™ FR4820 Natural Low Smoke Zero Halogen Flame Retardant Insulation Compound for Building Energy Cables Casico™ FR4820 is a thermoplastic, low smoke zero halogen (LSZH) flame retardant, UV stabilized, natural insulation compound combining with excellent extrusion properties. It is based on the novel.. |
|||
| Brittleness Temperature | <= -60.0 °C | <= -76.0 °F | GB 5470 |
| Chengdu Polyster 6502 High Performance Grade TPV Excellent resiliency, good hand feel, paintable.Information provided by Chengdu Polyster Co., Ltd. |
|||
| Brittleness Temperature | <= -60.0 °C | <= -76.0 °F | GB 5470 |
| Chengdu Polyster 9502 High Performance Grade TPV Excellent resiliency, good hand feel, paintable.Information provided by Chengdu Polyster Co., Ltd. |
|||
| Brittleness Temperature | <= -60.0 °C | <= -76.0 °F | ASTM D746 |
| ExxonMobil Paxon™ FD60-018 Compression Molding Resin FD60-018 is a very high molecular weight high density polyethylene powder. It exhibits very high impact strength.Information provided by ExxonMobil Chemical |
|||
| Brittleness Temperature | -60.0 °C | -76.0 °F | ASTM D746 |
| ExxonMobil Santoprene® 8271-75 Thermoplastic Elastomer A soft, colorable, specialty, non-hygroscopic thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. It complies with FDA regulations for rubber articles intended for repeated .. |
|||
| Brittleness Temperature | -60.0 °C | -76.0 °F | Cold Flex; ISO 458/2 |
| Fainplast Compounds GS 39/T Flexible PVC, Injection Molding for Footwear Sandals |
|||
| Brittleness Temperature | -60.0 °C | -76.0 °F | ASTM D746 |
| Alliance Polymers Viprene™ G45D-32U-NAT Thermoplastic Vulcanizate Elastomer Viprene™ G45D-32U-NAT is a UV and Heat Stabilized TVP (Thermoplastic Vulcanizate Elastomer). This material can be easily processed by extrusion or injection molding. It exhibits easy flowing charac.. |
|||
| Brittleness Temperature | -60.0 °C | -76.0 °F | ASTM D746 |
| Alliance Polymers Viprene™ G50A-32U-NAT Thermoplastic Vulcanizate Elastomer Viprene™ G50A-32U-BLK is a UV and Heat Stabilized TVP (Thermoplastic Vulcanizate Elastomer). This material can be easily processed by extrusion or injection molding. It exhibits easy flowing charac.. |
|||
| Brittleness Temperature | -60.0 °C | -76.0 °F | ASTM D746 |
| Alliance Polymers Viprene™ G75A-32U-BLK Thermoplastic Vulcanizate Elastomer Viprene™ G75A-32U-BLK is a UV and Heat Stabilized TVP (Thermoplastic Vulcanizate Elastomer). This material can be easily processed by extrusion or injection molding. It exhibits easy flowing charac.. |
|||
| Brittleness Temperature | -60.0 °C | -76.0 °F | ASTM D746 |
| Alliance Polymers Viprene™ P90A-22U-NAT Thermoplastic Vulcanizate Elastomer Viprene™ P90A-22U-NAT is a UV and Heat Stabilized TVP (Thermoplastic Vulcanizate Elastomer). This material can be easily processed by extrusion or injection molding. It exhibits easy flowing charac.. |
|||
| Brittleness Temperature | -60.0 °C | -76.0 °F | |
| AlphaGary Garaflex™ G 7782-A4 Thermoplastic Elastomer Garaflex™ G is a thermoplastic elastomer intended for wire and cable applications105°C rated TPE for flexible cord (SEO & SJEO). |
|||
| Brittleness Temperature | -60.0 °C | -76.0 °F | ASTM D746 |
| Alliance Polymers Viprene™ G40D-32U-BLK Thermoplastic Vulcanizate Elastomer Viprene™ G40D-32U-BLK is a UV and Heat Stabilized TVP (Thermoplastic Vulcanizate Elastomer). This material can be easily processed by extrusion or injection molding. It exhibits easy flowing charac.. |
|||
| Brittleness Temperature | <= -60.0 °C | <= -76.0 °F | TPE-0089 (ASTM D 746) |
| Advanced Elastomer Systems Santoprene® 181-73 Thermoplastic Rubber
(discontinued **) A black thermoplastic medical grade elastomer with good fluid resistance, certified non-toxic by MEM elution test. It has USP Class VI Certificate of Compliance for biocompatibility and can be proc.. |
|||
| Brittleness Temperature | <= -60.0 °C | <= -76.0 °F | TPE-0089 (ASTM D 746) |
| Advanced Elastomer Systems Santoprene® 281-45 Thermoplastic Rubber
(discontinued **) A colorable thermoplastic medical grade elastomer with good fluid resistance, certified non-toxic by MEM elution test. It has USP Class VI Certificate of Compliance for biocompatibility and can be .. |
|||
| Brittleness Temperature | <= -60.0 °C | <= -76.0 °F | ASTM D746 |
| SCG Chemicals EL-Lene™ H5211PYL High Density Polyethylene Pipe Resin Key Characteristics: Good processing, high thermal stability, good resistance to weatheringRecommended Applications: Stripe lines for PE80 pipe, non pressure pipesCertification: Certified by LNEI.. |
|||
Copyright © lookpolymers.com All Rights Reserved