- HOME
- POLYMER SEARCH
- Polymer Property : Flash Point = 150 °C
Polymer Property : Flash Point = 150 °C Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Flash Point | >= 150 °C | >= 302 °F | Ignition |
| M Chemical GUARD DOG™ UV1577 Light Absorber, Triazene Derivative GUARD DOG™ UV1577 UV absorber is a low volatile Triazine based UV absorber which is highly effective in polymers that are processed at high temperature (decomposition temperature > 350°C).Ap.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | Ignition |
| M Chemical GUARD DOG™ UV234 Light Absorber, Benzotriazole Derivative GUARD DOG™ UV234 UV absorber is a low volatile benzotriazole based UV absorber which is highly effective in polymers that are processed at high temperature (decomposition temperature > 350°C.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | Ignition |
| M Chemical GUARD DOGâ„¢ UV292 HALS Light Stabilizer GUARD DOGâ„¢ UV292 is a highly effective hindered amine light stabilizer that protects polymers against degradation caused by exposure to UV radiation.Applications: This UV stabilizer is mainly .. |
|||
| Flash Point | 150 °C | 302 °F | ASTM D92 |
| ExxonMobil 275 NC Mobiltac Mobiltac 375 NC, 325 NC and 275 NC extra high performance non-leaded, diluent-type, heavy-bodied open gear lubricants designed for a wide variety of open gear and mining applications. They contain a.. |
|||
| Flash Point | 150 °C | 302 °F | |
| ChevronTexaco Rando® HDZ 15 Texaco Rando HDZ oils deliver value through:High oxidation stability — Longer service life than attainable with conventional lubricants used in high pressure service.Protection against rust and cor.. |
|||
| Flash Point | 150 °C | 302 °F | |
| ChevronTexaco Transultex® CF A Texaco Transultex CF metalworking fluids deliver value through:Excellent antiweld properties from active sulfur and chlorine-free EP compounding which reduce frictional heat, prevent welding of meta.. |
|||
| Flash Point | 150 °C | 302 °F | ASTM D92 |
| ExxonMobil 275 NC Mobiltac Mobiltac 375 NC, 325 NC and 275 NC extra high performance non-leaded, diluent-type, heavy-bodied open gear lubricants designed for a wide variety of open gear and mining applications. They contain a.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | |
| Dow BETAMATE™ 1496 V Epoxy BETAMATE™ 1496 V is a one component, epoxy based adhesive especially developed for the body shop. The product has the following properties: Good rheology performance (Wash-out resistant, excelle.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | |
| Dow BETAMATE™ XW 1044-3 Epoxy BETAMATE™ XW 1044-3 is a one component, epoxy based adhesive especially developed for the body shop. The adhesive can be applied by robot systems and it shows high adhesion to metal and non-metal .. |
|||
| Flash Point | 150 °C | 302 °F | |
| Duratherm 450 Paraffinic Heat Transfer Fluid Duratherm 450 - thermal fluid specifically engineered for applications requiring process heating and cooling efficiently between 30°F and 450°F. Economical and thermally stable, Duratherm 450 offe.. |
|||
| Flash Point | 150 °C | 302 °F | |
| BASF Ethylene Carbonate S Formula: C3H4O3CAS: 96-49-1Description: Ethylene carbonate is a colorless to yellow solid, with a fruity odor. It is fully soluble in water.Synonyms: EC, 1,3-Dioxolan-2-oneApplications: Intermediat.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
| Aptek 2100-A/B Urethane Encapsulant and/or Potting Compound General purpose encapsulant and potting compound. Outstanding hydrolytic stability. Excellent adhesion to components/circuit boards. Low modulus, low stress. Field proven for military and space appl.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | A Component; ASTM D92 |
| Aptek 2100-A7C/B Low modulus urethane staking compound APTEK 2100-A7C/B is a thixotropic, two component, electrically insulating, low modulus urethane system designed for the staking of electrical/electronic components to printed circuit boards. Althoug.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | ASTM D92 |
| Aptek 2120 PMF Low modulus urethane staking compound Premixed-frozen, low modulus urethane staking compoundAPTEK 2120-PMF is a one component, premixed-frozen, thixotropic, electrically insulating soft urethane adhesive. It was designed for the stakin.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | A Component; ASTM D92 |
| Aptek 2205 A/B Low modulus urethane stacking compound APTEK 2205-A/B is a thixotropic, two component, electrically insulating, low modulus urethane system designed for the staking of electrical/electronic components to printed circuit boards. Although.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | A Component; ASTM D92 |
| Aptek 2209-A/B Clear, non-yellowing urethane adhesive APTEK 2209-A/B is a water clear, thixotropic, two component, electrically insulating, urethane adhesive designed for bonding various substrates. APTEK 2209-A/B is effective for bonding plastics and.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | A Component; ASTM D92 |
| Aptek 2210A/B Electrically conductive urethane adhesive Electrically conductive urethane adhesive, silver-filled, flexible low modulus, low outgassingAPTEK 2210-A/B is a two component, silver-filled, urethane adhesive designed for application where flexi.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
| Aptek 2210A/B Electrically conductive urethane adhesive Electrically conductive urethane adhesive, silver-filled, flexible low modulus, low outgassingAPTEK 2210-A/B is a two component, silver-filled, urethane adhesive designed for application where flexi.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
| Aptek 2503R-A/B Premeasured conformal urethane coating repair kit APTEK 2503-A/B is an unfilled, two component, electrically insulating, transparent, flexible urethane coating system designed for the encapsulation and protection of electrical/electronic components.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | A Component; ASTM D92 |
| Aptek 2712-A/B Very low stress silicone adhesive Very low stress silicone adhesive; -110ºC to 260ºC operating range; Low outgassing/space gradeAPTEK 2712-A/B is a two component, white, very soft, thixotropic, electrically insulative, silicone ad.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
| Aptek 2712-A/B Very low stress silicone adhesive Very low stress silicone adhesive; -110ºC to 260ºC operating range; Low outgassing/space gradeAPTEK 2712-A/B is a two component, white, very soft, thixotropic, electrically insulative, silicone ad.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
| Aptek 6103-A/B Epoxy Encapsulant Optoelectronic grade, reddish black encapsulant for IR LED discreets. Transparent to IR light while blocking out visible light.Part A is deep red. Part B is clear to pale yellow.Information provided.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
| Aptek 6109-A/B Epoxy Encapsulant Optoelectronic grade flexible water clear encapsulant. Higher viscosity/lower Tg version for clear blob-top encapsulation of ceramic substrate devicesPart A is blue. Part B is clear to pale yellow.I.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | ASTM D92 |
| Aptek 6505PMF Electronic-grade, non-conductive adhesive APTEK 6506-PMF is a one component, 100% solid, mineral-filled epoxy adhesive specifically designed for the attachment of electronic components to printed circuit boards as well as a protective barri.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | ASTM D92 |
| Aptek 6512-PMF Electronic grade, conductive epoxy adhesive APTEK 6512-PMF is a one component, 100% solid, silver-filled, electrically conductive epoxy adhesive specifically designed for the attachment of electronic components to printed circuit boards. APT.. |
|||
Copyright © lookpolymers.com All Rights Reserved