- HOME
- POLYMER SEARCH
- Polymer Property : CTE, linear = 2.50 µin/in-°F
Polymer Property : CTE, linear = 2.50 µin/in-°F Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 4.50 µm/m-°C @Temperature 20.0 °C |
2.50 µin/in-°F @Temperature 68.0 °F |
|
| Aremco Aremco-Bond™ 597 Conductive Epoxy Adhesive
(discontinued **) Electrically and thermally conductive, silver-filled, one-part paste. Inorganic system for adhesive (597A) & coating (597C) applications to 1200 ºF (650 °C). |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 20.0 - 400 °C |
2.50 µin/in-°F @Temperature 68.0 - 752 °F |
|
| Hogen Diemitechâ„¢ Tungsten-Based Metal Diemitech is a new tungsten-based material used for high temperature tooling, die casting, extrusion dies, hot upsetting, and electro brazing. It has a higher tungsten content than similar available.. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 20.0 - 400 °C |
2.50 µin/in-°F @Temperature 68.0 - 752 °F |
|
| Hogen HM1250 Tungsten-Based Metal Slightly Magnetic.Manufactured by powder metallurgy methods. The tungsten base offers high thermal conductivity and a low CTE which combine to resist thermal fatigue. The high melting point reduce.. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 25.0 - 260 °C |
2.50 µin/in-°F @Temperature 77.0 - 500 °F |
|
| Ferro EG 2738 Dental Glass Glass Type: Ba-Al-B-Si Typical Application: Glass Filler Ferro's Dental Glasses are standard x-ray opaque glass powders and inorganic fillers for use in dental restorations. Ferro also manufacture.. |
|||
| CTE, linear | 4.50 µm/m-°C | 2.50 µin/in-°F | at Set Pt. |
| Ferro EG 2770 Specialty Glass Glass Type: Si-Al-Mg-Ca Typical Powder Form: TF Typical Application: Sintering Aid Ferro offers a wide range of compositions for specialty applications including sintering aids used in the glass-ph.. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 25.0 - 260 °C |
2.50 µin/in-°F @Temperature 77.0 - 500 °F |
|
| Ferro IP 820 Passivation Glasses (Pb-B-Si-Al; Pb-Si-Al; Si-Pb-Al Silicates) Glass Type: Pb-Si-Al Typical Powder Form: TF, REG, RWG, SRRG Ferro's passivation glasses are designed for use on transistors, thyristors, and diodes. These products are formulated and produced to a.. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 25.0 - 260 °C |
2.50 µin/in-°F @Temperature 77.0 - 500 °F |
|
| Ferro IP 830 Passivation Glasses (Pb-B-Si-Al; Pb-Si-Al; Si-Pb-Al Silicates) Glass Type: Pb-B-Si-Al Typical Powder Form: TF, REG, RWG, SRRG Ferro's passivation glasses are designed for use on transistors, thyristors, and diodes. These products are formulated and produced to.. |
|||
| CTE, linear | <= 4.50 µm/m-°C @Temperature 20.0 °C |
<= 2.50 µin/in-°F @Temperature 68.0 °F |
|
| MarkeTech AN 90 Aluminum Nitride Ceramic Substrate, 98% Purity Data provided by the supplier, MarkeTech International.Substrate Specs: Maximum dimensions 5.5 x 3.6 in.. Thickness 0.12-0.60 in. Surface roughness 0.3 µm as fired; 0.075 µm lapped; 0.025 Â.. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 0.000 - 30.0 °C |
2.50 µin/in-°F @Temperature 32.0 - 86.0 °F |
|
| Mateck Cadmium Telluride (CdTe) Optical crystals |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 20.0 - 400 °C |
2.50 µin/in-°F @Temperature 68.0 - 752 °F |
|
| Mi-Tech Metals Diemitechâ„¢ Tungsten-Based Metal Diemitech is a new tungsten-based material used for high temperature tooling, die casting, extrusion dies, hot upsetting, and electro brazing. It has a higher tungsten content than similar available.. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 20.0 - 400 °C |
2.50 µin/in-°F @Temperature 68.0 - 752 °F |
|
| Mi-Tech Metals HD18.5 Tungsten-Based Metal Mil Spec T-21014D Class 4; ASTM B-777-99 Class 4; ASTM B-777-07 Class 4; AMS T-21014 Class 4. Slightly Magnetic.Manufactured by powder metallurgy methods. The tungsten base offers high thermal con.. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 25.0 - 260 °C |
2.50 µin/in-°F @Temperature 77.0 - 500 °F |
|
| Ferro IP 770 Passivation Glasses (Pb-B-Si-Al; Pb-Si-Al; Si-Pb-Al Silicates) Glass Type: Pb-Si-Al Typical Powder Form: TF, REG, RWG, SRRG Ferro's passivation glasses are designed for use on transistors, thyristors, and diodes. These products are formulated and produced to a.. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature -30.0 - 70.0 °C |
2.50 µin/in-°F @Temperature -22.0 - 158 °F |
|
| Schott G018-310 Dental Glass Remarks: Zr-containing, high refractive indexApplication: CompositeAdvantagesGreater variety of composition and refractive indiciesOutstanding transparencyBest radiopacitiesInformation Provided by S.. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 20.0 - 300 °C |
2.50 µin/in-°F @Temperature 68.0 - 572 °F |
ISO 7991 |
| Schott Glass 8449 Intermediate Sealing Glass Intermediate sealing glass Sealing to the glasses 8412, 8447, and 8487Information provided by SCHOTT AG. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 20.0 - 300 °C |
2.50 µin/in-°F @Temperature 68.0 - 572 °F |
ISO 7991 |
| Schott Glass 8652 Sealing Glass Tungsten sealing glass, lower sealing temperature than glass 8651 Power diodesInformation provided by SCHOTT AG. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 20.0 - 300 °C |
2.50 µin/in-°F @Temperature 68.0 - 572 °F |
ISO 7991 |
| Schott NEO 1730 Alkaline Earth Aluminosilicate Glass Alkaline earth aluminosilicate glass for high temperature applications in electrical engineering, for sealing to molybdenum, free from alkali Bulb and exhaust tube for halogen lamps for automotive,.. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 20.0 °C |
2.50 µin/in-°F @Temperature 68.0 °F |
|
| SGL Carbon Group EK 2201 Carbon Graphite Good mechanical strength, good sliding properties, high temperature resistance, high thermal shock resistance, low wettability, high corrosion resistance, high thermal conductivity, high purity, and.. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 22.8 - 260 °C |
2.50 µin/in-°F @Temperature 73.0 - 500 °F |
ASTM E831 |
| Saint-Gobain Meldin® 7021 Direct Formed Graphite Filled Polyimide Finished parts and basic shapes made from 15% by weight graphite filled polyimide material for applications high wear resistance, good thermal oxidative stability, and high temperature resistance. .. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 23.0 - 85.0 °C |
2.50 µin/in-°F @Temperature 73.4 - 185 °F |
ASTM D696 |
| Solvay TECHNYL® 2412GHF6 PA66, 33% glass fiber, DRY Description: Polyamid 66, reinforced with 33% of glass fiber, heat stabilized for injection moldingAvailable in: Asia PacificProduct Applications: TECHNYL® 2412GHF6 is used in all sectors of indu.. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 1000 °C |
2.50 µin/in-°F @Temperature 1830 °F |
|
| Chosun Refractories HL-15 Special Insulating Firebrick Information provided by Chosun Refractories via Korea Institute of Ceramic Engineering and Technology (KICET). |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 1000 °C |
2.50 µin/in-°F @Temperature 1830 °F |
|
| Chosun Refractories SB90S Bricks, Oxide Bonded SiC Information provided by Chosun Refractories via Korea Institute of Ceramic Engineering and Technology (KICET). |
|||
| CTE, linear | 4.50 - 5.20 µm/m-°C @Temperature 25.0 - 800 °C |
2.50 - 2.89 µin/in-°F @Temperature 77.0 - 1470 °F |
|
| China-Yixing Longly Refractories ZTA (20%ZrO2) Zirconia Toughened Alumina Composite Ceramic LONGLY's Zirconia Toughened Alumina ceramics (hereafter referred as composite ceramic, ZTA) is white, corrosion resistance, good chemical stability. As well all know that alumina is hard, while zir.. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 20.0 - 1000 °C |
2.50 µin/in-°F @Temperature 68.0 - 1830 °F |
|
| Ceradyne CeraTrex™ SC-P2 Silicon Carbide Features:purity>99.9995%corrosion resistancewear resistancenear net shape fabrication to 400 mm OD Applications:semiconductor componentswear componentsInformation provided by Ceradyne Company |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 20.0 - 1000 °C |
2.50 µin/in-°F @Temperature 68.0 - 1830 °F |
|
| Ceradyne CeraTrex™ SC-P3 Silicon Carbide Features:purity>99.9995%corrosion resistancewear resistancenear net shape fabrication to 400 mm OD Applications:semiconductor componentswear componentsInformation provided by Ceradyne Company |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 20.0 °C |
2.50 µin/in-°F @Temperature 68.0 °F |
|
| Aremco AREMCOLOX™ 502-1100 (Unfired) Machinable Alumino-Silicate Good thermal and dielectric properties and can be fired to increase temperature resistance and mechanical strength. Easily machined to close tolerances. Plates, rods and bars available to 12". |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 27.0 - 175 °C |
2.50 µin/in-°F @Temperature 80.6 - 347 °F |
ASTM D696 |
| 3M 7993MP Hi-Performance Acrylic 200MP This adhesive meets the requirements of most long-term applications. It offers temperature resistance to 400°F (204°C). Peel adhesion values are excellent on most membrane switch substrate materia.. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature <=1000 °C |
2.50 µin/in-°F @Temperature <=1830 °F |
|
| Acerde Aluminum Nitride Aluminum Nitride key properties: High thermal conductivity, Good resistance to abrasion and oxidation, Electrical insulating material, Low thermal expansion coefficient, PiezoelectricAluminum Nitrid.. |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 20.0 - 1000 °C |
2.50 µin/in-°F @Temperature 68.0 - 1830 °F |
|
| Ceradyne CeraTrex™ 146-S5 Silicon Carbide Features:corrosion resistancewear resistancehardnessnet shape fabricationApplications:wear componentsInformation provided by Ceradyne Company |
|||
| CTE, linear | 4.50 µm/m-°C @Temperature 23.0 - 85.0 °C |
2.50 µin/in-°F @Temperature 73.4 - 185 °F |
ASTM D696 |
| Solvay TECHNYL® 2411GF6 PA66, 30% glass fiber, DRY Description: Polyamid 66, 30% glass fiber reinforce, for injection moldingAvailable in: Asia PacificProduct Applications: TECHNYL® 2411GF6 used in all sectors of industry, offering an excellent com.. |
|||
Copyright © lookpolymers.com All Rights Reserved