Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 43.2 µm/m-°C | 24.0 µin/in-°F | NOVA Chemicals Laboratory Procedure |
NOVA Chemicals Dylark® 378P30 Glass Reinforced Engineering Resin Features: Ultra high modulus, High heat resistance, excellent adhesion to urethaneApplications: Instrument panel substrates, Brackets, Structural components |
|||
CTE, linear | 43.2 - 59.4 µm/m-°C | 24.0 - 33.0 µin/in-°F | Average value: 51.8 µm/m-°C Grade Count:5 |
Overview of materials for Glass Reinforced, Modified SMA This property data is a summary of similar materials in the MatWeb database for the category "Glass Reinforced, Modified SMA". Each property range of values reported is minimum and maximum values of.. |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 22.8 - 260 °C |
24.0 µin/in-°F @Temperature 73.0 - 500 °F |
ASTM E831 |
Saint-Gobain Meldin® 7211 CM Compression Molded Graphite and PTFE Filled Polyimide Melidin® 7211 CM is a compression molded polyimide that contains 15% graphite and 10% PTFE fillers. This grade has the lowest coefficient of friction of the Meldin® 7000 series polyimides.Spe.. |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Techmer ES Plaslube® J-1/30/TF/13/SI/2 NAT PA66 |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Techmer ES Plaslube® J-1/30/TF/15 BK223 PA66 |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Techmer ES Plaslube® J-1/30/TF/15 RED PA66 |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Techmer ES Plaslube® J-1/30/TF/22 BK223 PA66 |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Techmer ES Plaslube® J-1/30/TF/22 NAT PA66 |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Techmer ES Plaslube® J-1/30/TF/15 NAT PA66 |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 22.8 - 260 °C |
24.0 µin/in-°F @Temperature 73.0 - 500 °F |
ASTM E831 |
Saint-Gobain Meldin® 7211 DF Direct Formed Graphite and PTFE Filled Polyimide Melidin® 7211 DF is a direct formed polyimide that contains 15% graphite and 10% PTFE fillers. This grade has the lowest coefficient of friction of the Meldin® 7000 series polyimides.Specific.. |
|||
CTE, linear | 43.2 µm/m-°C | 24.0 µin/in-°F | ASTM D696 |
Diamond Polymers NPP25-0303 GF20 20% Glass Filled Polypropylene Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc. |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Asahi Kasei Thermylene® P6-20FG-0600 20% Glass Fiber Reinforced, Heat Stabilized Information provided by Asahi Thermofil |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Asahi Kasei Thermylene® P6-20FG-0659 20% Glass Fiber Reinforced, Heat Stabilized Information provided by Asahi Thermofil |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Asahi Kasei Thermylene® P6-20FG-1734 20% Glass Fiber Reinforced, High Impact Information provided by Asahi Thermofil |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Asahi Kasei Thermylene® P6-20FG-1740 20% Glass Fiber Reinforced, High Impact Information provided by Asahi Thermofil |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Asahi Kasei Thermylene® P6-20FG-2153 20% Glass Fiber Reinforced, Heat Stabilized Information provided by Asahi Thermofil |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Asahi Kasei Thermylene® P6-20FG-2153R 20% Glass Fiber Reinforced, Heat Stabilized Information provided by Asahi Thermofil |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Asahi Kasei Thermylene® P6-30FG-0570 30% Glass Fiber Reinforced, Flame Retardant Information provided by Asahi Thermofil |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Asahi Kasei Thermofil N-40MF-1600 40% Mineral Filled, Heat Stabilized Information provided by Asahi Thermofil |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Asahi Kasei Thermofil N5-15FG-1103 15% Glass Fiber Reinforced, Lubricated Information provided by Asahi Thermofil |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Asahi Kasei Thermofil P-40TC-5100 40% Talc Reinforced, Heat Stabilized Information provided by Asahi Thermofil |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Asahi Kasei Thermofil P-40TC-8100 40% Talc Reinforced, Heat Stabilized Information provided by Asahi Thermofil |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Asahi Kasei Thermylene® P-20FG-1714 20% Glass Fiber Reinforced, Medium Impact Information provided by Asahi Thermofil |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Asahi Kasei Thermylene® P6-20FG-0738 20% Glass Fiber Reinforced, High Impact Information provided by Asahi Thermofil |
|||
CTE, linear | 43.2 µm/m-°C @Temperature 20.0 °C |
24.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
PolyOne Edgetek® NI-20GF/000 Nylon 6/10, Glass Filled
(discontinued **) Description/Features:Glass Fiber ReinforcedPolyOne First ChoiceInformation provided by PolyOne Corporation. |
|||
CTE, linear | 43.2 - 120 µm/m-°C | 24.0 - 66.7 µin/in-°F | Average value: 83.3 µm/m-°C Grade Count:27 |
Overview of materials for Acetal Copolymer, PTFE Filled This property data is a summary of similar materials in the MatWeb database for the category "Acetal Copolymer, PTFE Filled". Each property range of values reported is minimum and maximum values of .. |
|||
CTE, linear | 43.2 - 95.0 µm/m-°C | 24.0 - 52.8 µin/in-°F | Average value: 58.8 µm/m-°C Grade Count:4 |
Overview of materials for Acetal Copolymer + Glass/PTFE This property data is a summary of similar materials in the MatWeb database for the category "Acetal Copolymer + Glass/PTFE". Each property range of values reported is minimum and maximum values of .. |