- HOME
- POLYMER SEARCH
- Polymer Property : Thermal Conductivity = 125 BTU-in/hr-ft²-°F
Polymer Property : Thermal Conductivity = 125 BTU-in/hr-ft²-°F Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 18.0 W/m-K @Temperature 300 °C |
125 BTU-in/hr-ft²-°F @Temperature 572 °F |
|
| Outokumpu 2205 Duplex Stainless Steel Duplex stainless combining high mechanical strength with good corrosion resistance.Applications: Pulp and paper industryDesalination plantsFlue-gas cleaningCargo tanks and pipe systems in chemical t.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 400 °C |
125 BTU-in/hr-ft²-°F @Temperature 752 °F |
|
| Outokumpu 254 SMO® High Performance Austenitic Stainless Steel Applications: Process equipment in chemical industryBleaching equipment in the pulp and paper industryFlue-gas cleaningDesalinationSeawater handlingHeat exchangersAvailable in hot rolled plate (Quar.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 400 °C |
125 BTU-in/hr-ft²-°F @Temperature 752 °F |
|
| Outokumpu 4529 Austenitic Stainless Steel Applications: Wet corrosion resistance and general service.Available in hot rolled plate (Quarto) form. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 400 °C |
125 BTU-in/hr-ft²-°F @Temperature 752 °F |
|
| Outokumpu 4565 High Performance Austenitic Stainless Steel Applications: Process equipment in chemical industryBleaching equipment in the pulp and paper industryFlue-gas cleaningDesalinationSeawater handlingHeat exchangersAvailable in hot rolled plate (Quar.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 300 °C |
125 BTU-in/hr-ft²-°F @Temperature 572 °F |
|
| Outokumpu SAF 2304® Duplex Stainless Steel Applications: Pulp and paper industryDesalination plantsFlue-gas cleaningCargo tanks and pipe systems in chemical tankersSeawater systemsFirewalls and blast walls on offshore platformsBridgesCompone.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 300 °C |
125 BTU-in/hr-ft²-°F @Temperature 572 °F |
|
| Outokumpu SAF 2507® Duplex Stainless Steel Applications: Pulp and paper industryDesalination plantsFlue-gas cleaningCargo tanks and pipe systems in chemical tankersSeawater systemsFirewalls and blast walls on offshore platformsBridgesCompone.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 85.0 °C |
125 BTU-in/hr-ft²-°F @Temperature 185 °F |
|
| Indium Corp. Indalloy® 10 Pb-In Solder Alloy Indalloy's #7, #10, #150, #204, #205 and #206 comprise a group of lead-indium solders designed to cover the temperature range of 165°C-275°C. All have the minimum gold-leaching characteristics.. |
|||
| Thermal Conductivity | 18.0 W/m-K | 125 BTU-in/hr-ft²-°F | |
| Misumi Alumina 96 Aluminum Oxide, Al2O3 Information provided by MISUMI Corporation. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 500 °C |
125 BTU-in/hr-ft²-°F @Temperature 932 °F |
|
| Haynes Hastelloy® N, 1.14 mm sheet, aged 10000 hours at 538°C (1000°F) Applications include containers for molten fluoride salts. Good oxidation resistance to hot fluoride salts at 705-870°C (1300-1600°F), good oxidation resistance in air.Data provided by the man.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 500 °C |
125 BTU-in/hr-ft²-°F @Temperature 932 °F |
|
| Haynes Hastelloy® N, 1.14 mm sheet, aged 10000 hours at 704°C (1300°F) Applications include containers for molten fluoride salts. Good oxidation resistance to hot fluoride salts at 705-870°C (1300-1600°F), good oxidation resistance in air.Data provided by the man.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 500 °C |
125 BTU-in/hr-ft²-°F @Temperature 932 °F |
|
| Haynes Hastelloy® N, 1.6 mm sheet, heat treated at 1175°C, welded and tested as welded Applications include containers for molten fluoride salts. Good oxidation resistance to hot fluoride salts at 705-870°C (1300-1600°F), good oxidation resistance in air.Data provided by the man.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 500 °C |
125 BTU-in/hr-ft²-°F @Temperature 932 °F |
|
| Haynes Hastelloy® N, weld metal as welded Applications include containers for molten fluoride salts. Good oxidation resistance to hot fluoride salts at 705-870°C (1300-1600°F), good oxidation resistance in air.Data provided by the man.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 500 °C |
125 BTU-in/hr-ft²-°F @Temperature 932 °F |
|
| Haynes Hastelloy® N, weld metal, aged 500 hours at 649°C (1200°F) Applications include containers for molten fluoride salts. Good oxidation resistance to hot fluoride salts at 705-870°C (1300-1600°F), good oxidation resistance in air.Data provided by the man.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 85.0 °C |
125 BTU-in/hr-ft²-°F @Temperature 185 °F |
|
| Indium Corp. Indalloy® 158 Bi-Pb-Sn-Cd Solder Alloy Lowest melting point solder. Good fusible alloy used for lens blocking.Information provided by the manufacturer, Indium Corporation. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 400 °C |
125 BTU-in/hr-ft²-°F @Temperature 752 °F |
|
| Haynes 263® alloy, cold rolled sheet, solution treated and aged Very good aged strength properties, excellent fabrication characteristics when annealed, excellent intermediate temperature tensile ductility, is not normally subject to strain age cracking, excelle.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 500 °C |
125 BTU-in/hr-ft²-°F @Temperature 932 °F |
|
| Haynes Hastelloy® C-2000® alloy, flat products Nickel-chromium-molybdenum (Ni-Cr-Mo) C-type alloys have a long history of use in the Chemical Process Industries and are known for their versatility. Not only do they resist all acids (especially h.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 20.0 - 100 °C |
125 BTU-in/hr-ft²-°F @Temperature 68.0 - 212 °F |
|
| CeramTec Rubalit® A 1894 Alumina, 94% Rubalit® A 1894 (94%) was specifically developed in response to electrical and electronic engineering needs. In conjunction with CeramTec's complementary metallization systems, a vacuum-tight bond .. |
|||
| Thermal Conductivity | 18.0 W/m-K | 125 BTU-in/hr-ft²-°F | |
| Williams Advanced Alloys WS264 Solder All Williams alloys are available in a variety of shapes and forms, including ribbon, preforms, rod, ring, wire, and custom shapes.Information provided by Williams Advanced Alloys |
|||
| Thermal Conductivity | 18.0 W/m-K | 125 BTU-in/hr-ft²-°F | Austenitic |
| Goodfellow Nickel 55/Titanium 45 Shape Memory Alloy Shape memory alloy is a description applied to that group of metallic materials which show the ability to return to the previously defined shape or size when subjected to the correct thermal procedu.. |
|||
| Thermal Conductivity | >= 18.0 W/m-K | >= 125 BTU-in/hr-ft²-°F | |
| Advanced Ceramics ACL 1085 (C-795) Alumina Information provided by Advanced Ceramics Limited (ACL) |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 500 °C |
125 BTU-in/hr-ft²-°F @Temperature 932 °F |
|
| Haynes Hastelloy® N, 1.14 mm sheet, aged 10000 hours at 593°C (1100°F) Applications include containers for molten fluoride salts. Good oxidation resistance to hot fluoride salts at 705-870°C (1300-1600°F), good oxidation resistance in air.Data provided by the manufac.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 500 °C |
125 BTU-in/hr-ft²-°F @Temperature 932 °F |
|
| Haynes Hastelloy® N, 1.14 mm sheet, aged 10000 hours at 760°C (1400°F) Applications include containers for molten fluoride salts. Good oxidation resistance to hot fluoride salts at 705-870°C (1300-1600°F), good oxidation resistance in air.Data provided by the manufac.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 500 °C |
125 BTU-in/hr-ft²-°F @Temperature 932 °F |
|
| Haynes Hastelloy® N, 1.6 mm sheet, aged 128 hours at 815°C (1500°F) Applications include containers for molten fluoride salts. Good oxidation resistance to hot fluoride salts at 705-870°C (1300-1600°F), good oxidation resistance in air.Data provided by the manufac.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 500 °C |
125 BTU-in/hr-ft²-°F @Temperature 932 °F |
|
| Haynes Hastelloy® N, 1.6 mm sheet, heat treated at 1175°C, rapid air cooled Applications include containers for molten fluoride salts. Good oxidation resistance to hot fluoride salts at 705-870°C (1300-1600°F), good oxidation resistance in air.Data provided by the manufac.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 400 °C |
125 BTU-in/hr-ft²-°F @Temperature 752 °F |
|
| Outokumpu 904L High Performance Austenitic Stainless Steel Applications: Process equipment in chemical industryBleaching equipment in the pulp and paper industryFlue-gas cleaningDesalinationSeawater handlingHeat exchangersAvailable in hot rolled plate (Quar.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 500 °C |
125 BTU-in/hr-ft²-°F @Temperature 932 °F |
|
| Haynes Hastelloy® N, 1.14 mm sheet, aged 10000 hours at 649°C (1200°F) Applications include containers for molten fluoride salts. Good oxidation resistance to hot fluoride salts at 705-870°C (1300-1600°F), good oxidation resistance in air.Data provided by the manufac.. |
|||
| Thermal Conductivity | 18.0 W/m-K @Temperature 500 °C |
125 BTU-in/hr-ft²-°F @Temperature 932 °F |
|
| Haynes Hastelloy® N, 1.14 mm sheet, heat treated at 1149°C (2100°F) Applications include containers for molten fluoride salts. Good oxidation resistance to hot fluoride salts at 705-870°C (1300-1600°F), good oxidation resistance in air.Data provided by the manufac.. |
|||
Copyright © lookpolymers.com All Rights Reserved