Processing Properties | Metric | English | Comments |
---|---|---|---|
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond HH120 Anaerobic Threadlocker Permabond® HH120 Threadlocker is an excellent general purpose threadlocker and sealant. It is used for locking bolts, nuts and screws that require permanent assembly. Its high viscosity allows for .. |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond HM129 Anaerobic Threadlocker Permabond® HM129 is a high strength medium viscosity anaerobic threadlocker and sealant. This material cures in the absence of air between tight fitting metal parts. Cure is fast and reliable on st.. |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond HM161 Anaerobic Retaining Compound Permabond® HM161 is a single component liquid that cures only when in contact with metal parts and oxygen is excluded. The liquid adhesive fills the “air space’ between parts and upon cure unitiz.. |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond HM162 Anaerobic Retainer Permabond® HM162 is a medium viscosity retaining compound that cures when confined between metal parts to form an extremely tough bond. It is best suited for cylindrical parts and where high temper.. |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond HM163 Anaerobic Retainer Permabond® HM163 is a medium viscosity, thixotropic anaerobic retaining compound that cures when confined between metal parts to form a tough bond. It has been specifically formulated to provide a .. |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond HM165 Anaerobic Retainer Permabond® HM165 is a high viscosity anaerobic retaining compound that cures when confined between metal parts to form a tough bond. It is best suited for cylindrical parts and where high temperatu.. |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond HH040 Anaerobic Retainer Permabond® HH040 is a single component liquid that cures only when in contact with metal parts and oxygen is excluded. The liquid adhesive fills the “air space” between parts and upon cure unitiz.. |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond MM115 Anaerobic Threadlocker Permabond® MM115 Threadlocker is an excellent general purpose threadlocker and sealant. It is used for locking metal bolts, nuts and screws that may require disassembly for service and maintenance... |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond MM115P Pure Anaerobic Threadlocker Permabond® MM115 PURE Threadlocker is an excellent general purpose threadlocker and sealant. It is used for locking metal bolts, nuts and screws that may require disassembly for service and mainten.. |
|||
Cure Time | 4.98 - 9.60 min @Temperature 149 °C |
0.0830 - 0.160 hour @Temperature 300 °F |
|
Master Bond Supreme 10HTF Fast Curing Toughened One Component Epoxy Adhesive Master Bond Polymer System Supreme 10HTF is a one part, no-mix system featuring a unique combination of properties including high shear and peel strength, exceptionally wide service temperature rang.. |
|||
Cure Time | 4.98 - 10.0 min @Temperature 149 °C |
0.0830 - 0.167 hour @Temperature 300 °F |
|
Master Bond Supreme 3HTND-1SM Fast Curing, One Component, Surface Mount Adhesive Master Bond Polymer System Supreme 3HTND-1SM is a one component, exceptionally fast curing surface mount adhesive system with exceptional toughness and durability. It has high shear and peel strengt.. |
|||
Cure Time | 4.98 - 10.0 min @Temperature 149 °C |
0.0830 - 0.167 hour @Temperature 300 °F |
|
Master Bond Supreme 3HTND-2GT One Part, Toughened, Fast Curing Glob Top Adhesive Master Bond Polymer System Supreme 3HTND-2GT is a fast curing, toughened one component high performance epoxy adhesive/sealant which meets the growing need for precise positioning and bonding of mic.. |
|||
Cure Time | 4.98 - 9.60 min @Temperature 149 °C |
0.0830 - 0.160 hour @Temperature 300 °F |
|
Master Bond EP3HTMED One Component, Biocompatible Epoxy System Master Bond Polymer System EP3HTMed combines the ease of a one part, no mix, fast curing adhesive with high shear strength. This special formulation fully meets USP Class VI requirements. EP3HTMed p.. |
|||
Cure Time | 4.98 min @Temperature 43.0 °C |
0.0830 hour @Temperature 109 °F |
Tack Free |
Chesterton ARC MX5 Rapid Curing Fine Particle Wear Compound Description: An advanced ceramic reinforced composite for the emergency repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is applied at a th.. |
|||
Cure Time | 4.98 min @Temperature 75.0 °C |
0.0830 hour @Temperature 167 °F |
Dust Free, at 50% humidity |
Blue River Coatings Acrylic 4000D Topcoat BLUE RIVER COATINGS ACRYLIC 4000 TOPCOAT is a hard, flexible, economical coating designed for multiple substrates. BLUE RIVER COATINGS ACRYLIC 4000 TOPCOAT offers good application properties, low fo.. |
|||
Cure Time | 4.98 min @Temperature 75.0 °C |
0.0830 hour @Temperature 167 °F |
Recoat, at 50% humidity |
Blue River Coatings Semi-Transparent Wood Stain Concentrate BLUE RIVER COATINGS Semi-Transparent Wood Stain is a water based stain developed to provide long lasting protection and a beautiful appearance on wood surfaces. BLUE RIVER COATINGS Semi-Transparent .. |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
M10 steel, handling strength |
Permabond A1042 Anaerobic Threadlocker Permabond® A1042 is a rapid curing adhesive designed to lock and seal metal parts that subsequently may need to be dismantled for maintenance. The high vibration resistance makes Permabond A1042 pa.. |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond A1042 Anaerobic Threadlocker Permabond® A1042 is a rapid curing adhesive designed to lock and seal metal parts that subsequently may need to be dismantled for maintenance. The high vibration resistance makes Permabond A1042 pa.. |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond A1044 Anaerobic Threadsealant Permabond® A1044 is a rapid curing sealant designed to lock and seal metal pipe connections, offering very good resistance to even the most aggressive chemicals. Permabond A1044 can be used to seal.. |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond HM135 Anaerobic Retainer Permabond® HM135 is a fast curing, medium viscosity anaerobic adhesive for locking and sealing threads and retaining cylindrical components. It gives maximum torque strength on brass or plated bras.. |
|||
Cure Time | 4.98 - 10.2 min @Temperature 23.0 °C |
0.0830 - 0.170 hour @Temperature 73.4 °F |
M10 steel, handling strength |
Permabond HM135 Anaerobic Retainer Permabond® HM135 is a fast curing, medium viscosity anaerobic adhesive for locking and sealing threads and retaining cylindrical components. It gives maximum torque strength on brass or plated bras.. |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond MH052 Anaerobic Threadsealant Permabond® MH052 is ideal for the sealing of threaded joints. It is approved for use with natural gas and LPG for working pressure up to 20 bar (290 psi) and also for gaseous oxygen up to 10 bar (1.. |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond A113 Anaerobic Threadlocker Designed for the locking and sealing of metal parts, Permabond® A113 is ideally suited for use on components that need to be dismantled for maintenance. Giving vibration resistance it can be used .. |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond A118 Anaerobic Retainer Permabond® A118 is an anaerobic adhesive designed to provide permanent locking and sealing of metal parts such as bearings, gears, studs and other threaded components. It exhibits high strength, ex.. |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond A126 Anaerobic Retainer Permabond® A126 is a high-strength anaerobic adhesive for permanent assembly of coaxial assemblies or threaded metal components. The exceptionally low viscosity of this product makes it ideal for u.. |
|||
Cure Time | 4.98 min @Temperature 23.0 °C |
0.0830 hour @Temperature 73.4 °F |
Brass, handling strength |
Permabond A136 Anaerobic Gasketmaker Permabond® A136 is an anaerobic material designed for making 'formed in situ' gaskets between metal surfaces. It is capable of replacing a wide range of conventional gaskets thereby offering potent.. |
|||
Cure Time | 4.98 min @Temperature 75.0 °C |
0.0830 hour @Temperature 167 °F |
Dust Free, at 50% humidity |
Blue River Coatings Acrylic 4000 Topcoat BLUE RIVER COATINGS ACRYLIC 4000 TOPCOAT is a hard, flexible, economical coating designed for multiple substrates. BLUE RIVER COATINGS ACRYLIC 4000 TOPCOAT offers good application properties, low fo.. |