Processing Properties | Metric | English | Comments |
---|---|---|---|
Mold Temperature | 25.0 °C | 77.0 °F | |
NatureWorks® Ingeo™ 3001D Injection Grade PLA NatureWorks® PLA (polylactide) polymer 3001D is designed for injection molding applications. It is designed for clear applications with heat deflection temperatures lower than 130ºF (55ºC). Appli.. |
|||
Mold Temperature | 25.0 °C | 77.0 °F | |
NatureWorks® Ingeo™ AW 300D Injection Grade Biopolymer Specifically designed for use in injection molded food serviceware applications. This opaque, off-white molding grade creates parts that are rigid and heat resistant for tableware used with hot food.. |
|||
Mold Temperature | 25.0 - 50.0 °C | 77.0 - 122 °F | |
Huntsman AVALON® 60 ABX Thermoplastic Polyurethane Introduction: AVALON 60 ABX is a high performance polyester based thermoplastic polyurethane for injection molding. AVALON 60 ABX is part of the AVALON Perform Range and offers a specially designed,.. |
|||
Mold Temperature | 25.0 - 60.0 °C | 77.0 - 140 °F | |
Lehmann & Voss LUVOCOM® TPU-7682 Thermoplastic polyurethane, with carbon fiber Applications: Electrically conductive, suitable for continuous discharging of statically generated electricity.Improved wear behaviour, low warpage.Bearings, sleeves, sliding elements, chair rollers.. |
|||
Mold Temperature | 25.0 - 50.0 °C | 77.0 - 122 °F | |
Huntsman AVALON® 90 AKU Thermoplastic Polyurethane Introduction: AVALON 90 AKU is a part of the AVALON Crystal Range and offers a specially designed, flexible material wit a higher degree of transparency compared with conventional TPU at the same ha.. |
|||
Mold Temperature | 25.0 - 50.0 °C | 77.0 - 122 °F | |
Huntsman AVALON® 95 AE Thermoplastic Polyurethane Introduction: AVALON 95 AE is a general purpose polyester based thermoplastic polyurethane for injection molding. AVALON 95 AE is part of the AVALON Perform Range and offers a premium soiling materi.. |
|||
Mold Temperature | 25.0 - 60.0 °C | 77.0 - 140 °F | |
Lehmann & Voss LUVOCOM® 100-7126 VP Thermoplastic polyurethane, with PTFE Applications: Improved friction and wear behaviour. Emergency running property.dynamic stressBearings, sleeves, sliding elements, chair rollers, handles.Information provided by Lehmann & Voss & Co.K.. |
|||
Mold Temperature | 25.0 - 65.6 °C | 77.0 - 150 °F | |
Teknor Apex Telcar® TL EF-6100 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets P.. |
|||
Mold Temperature | 25.0 - 65.6 °C | 77.0 - 150 °F | |
Teknor Apex Telcar® TL-1934E Styrenic Thermoplastic Elastomer Uses: Appliance Wire Insulation; Cable Jacketing; Flexible Cord Insulation; Wire and Cable Applications; Wire Jacketing Agency Ratings: UL 1581 Forms: Pellets Processing Method: Extrusion; Injection.. |
|||
Mold Temperature | 25.0 - 65.6 °C | 77.0 - 150 °F | |
Teknor Apex Telcar® TL-2540A Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets .. |
|||
Mold Temperature | 25.0 - 65.6 °C | 77.0 - 150 °F | |
Teknor Apex Telcar® TL-2590A Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets .. |
|||
Mold Temperature | 25.0 - 65.6 °C | 77.0 - 150 °F | |
Teknor Apex Telcar® TL-93-T0488P-83 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets .. |
|||
Mold Temperature | 25.0 - 65.6 °C | 77.0 - 150 °F | |
Teknor Apex Telcar® TL-2365A Thermoplastic Polyolefin Elastomer Uses: Automotive Applications; Flexible Grips; Gaskets; General Purpose; Industrial Applications; Roof Vents Forms: Pellets Processing Method: Extrusion; Injection Molding Injection Notes: Injectio.. |
|||
Mold Temperature | 25.0 - 60.0 °C | 77.0 - 140 °F | |
Arkema Group Pebax® 7033 SP 01 Polyether Block Amide (PEBA) Polyether block amide PEBAX® 7033 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade has been developed to be heat and UV resistant.Information provide.. |
|||
Mold Temperature | 25.0 - 60.0 °C | 77.0 - 140 °F | |
Arkema Group Pebax® 7233 SA 01 Polyether Block Amide (PEBA) Polyether block amide PEBAX® 7233 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade has been developed to be heat and UV resistant.Information provide.. |
|||
Mold Temperature | 25.0 - 60.0 °C | 77.0 - 140 °F | Injection |
Alliance Polymers Zythane™ 5050D Thermoplastic Polyurethane Elastomer Zythane™ 5050D is a polycaprolactone-based TPU specifically formulated for injection molding applications .It exhibits excellent low compression set, abrasion resistance and toughness and has good .. |
|||
Mold Temperature | 25.0 - 60.0 °C | 77.0 - 140 °F | Injection |
Alliance Polymers Zythane™ 7090A Thermoplastic Polyurethane Elastomer Zythane™ 7090A is a polyether-based TPU specifically formulated for extrusion molding applications .It exhibits excellent low compression set, abrasion resistance and toughness and has good hydroly.. |