Polymer Property : Dielectric Strength = 399 kV/in Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Electrical Properties	Metric	English	Comments
Dielectric Strength	15.7 - 30.2 kV/mm	399 - 767 kV/in	Average value: 26.3 kV/mm Grade Count:19
Overview of materials for Polybutylene Terephthalate (PBT), Extrusion Grade This property data is a summary of similar materials in the MatWeb database for the category "Polybutylene Terephthalate (PBT), Extrusion Grade". Each property range of values reported is minimum an..
Dielectric Strength	15.7 kV/mm @Thickness 3.17 mm	399 kV/in @Thickness 0.125 in	short term; ASTM D149
Ensinger ENSITEP® PBT Polybutylene Terephthalate - Extruded Products (discontinued **) ENSITEP BT is an unreinforced thermoplastic polyester derived from polybutylene terephthalate. Its excellent wear and impact resistance, low coefficient of friction, high flexural modulus, and supe..
Dielectric Strength	15.7 kV/mm	399 kV/in	Short Time, 500V/sec; ASTM D149
Eastman 7352 PET (discontinued **) VORIDIAN PET thermoplastic polyesters are condensation polymers produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. VORIDIAN PET polyester 73..
Dielectric Strength	15.7 - 27.0 kV/mm	399 - 686 kV/in	Average value: 20.4 kV/mm Grade Count:44
Overview of materials for Silicone, RTV, Encapsulation Grade This property data is a summary of similar materials in the MatWeb database for the category "Silicone, RTV, Encapsulation Grade". Each property range of values reported is minimum and maximum value..
Dielectric Strength	15.7 kV/mm	399 kV/in	ASTM D149
Plenco 504 Black (COM) Heat Resistant Mineral/Cellulose Filled Phenolic Molding Compound (discontinued **)< Plaslok 504 is a two-stage, mineral and cellulose-filled phenolic molding compound having better impact and heat resistance than general purpose molding compounds. Since it also has good electrical..
Dielectric Strength	15.7 kV/mm	399 kV/in	ASTM D149
Plenco 504 Black (INJ) Heat Resistant Mineral/Cellulose Filled Phenolic Molding Compound (discontinued **)< Plaslok 504 is a two-stage, mineral and cellulose-filled phenolic molding compound having better impact and heat resistance than general purpose molding compounds. Since it also has good electrical..
Dielectric Strength	15.7 kV/mm @Thickness 2.00 mm	399 kV/in @Thickness 0.0787 in	ASTM D149
Manifattura Cattaneo RULONÂ® LR Polytetrafluoroethylene Manifattura Cattaneo products are available in semi-finished forms such as bars, profiles, sheets and plates.Information provided by Manifattura Cattaneo s.p.a.
Dielectric Strength	15.7 kV/mm @Thickness 1.90 mm	399 kV/in @Thickness 0.0748 in
Momentive Performance Materials RTV12 Clear General Purpose Potting/Encapsulating Compound Two-part condensation cure. Two-part condensation cure silicones RTVs are designed to cute at room temperature, and can be applied at temperature up to one inch (2.5 cm). These are very tough mate..
Dielectric Strength	15.7 kV/mm	399 kV/in	2.54 mm gap
Solvay Specialty Polymers GaldenÂ® D02 PFPE Fluid GaldenÂ® D grades are specifically recommended for electronic reliability testing, including thermal shock and hermetic seal testing.GaldenÂ® PFPE is a line of high-performance, inert, fluorinat..
Dielectric Strength	15.7 kV/mm	399 kV/in	2.54 mm gap
Solvay Specialty Polymers GaldenÂ® D02TS PFPE Fluid GaldenÂ® D grades are specifically recommended for electronic reliability testing, including thermal shock and hermetic seal testing.GaldenÂ® PFPE is a line of high-performance, inert, fluorinat..
Dielectric Strength	15.7 kV/mm	399 kV/in	2.54 mm gap
Solvay Specialty Polymers GaldenÂ® D03 PFPE Fluid GaldenÂ® D grades are specifically recommended for electronic reliability testing, including thermal shock and hermetic seal testing.GaldenÂ® PFPE is a line of high-performance, inert, fluorinat..
Dielectric Strength	15.7 kV/mm	399 kV/in	2.54 mm gap
Solvay Specialty Polymers GaldenÂ® D05 PFPE Fluid GaldenÂ® D grades are specifically recommended for electronic reliability testing, including thermal shock and hermetic seal testing.GaldenÂ® PFPE is a line of high-performance, inert, fluorinat..
Dielectric Strength	15.7 kV/mm	399 kV/in	2.54 mm gap
Solvay Specialty Polymers GaldenÂ® DET PFPE Fluid GaldenÂ® D grades are specifically recommended for electronic reliability testing, including thermal shock and hermetic seal testing.GaldenÂ® PFPE is a line of high-performance, inert, fluorinat..
Dielectric Strength	15.7 kV/mm	399 kV/in	2.54 mm gap
Solvay Specialty Polymers GaldenÂ® HS260 PFPE VPS Fluid GaldenÂ® LS and HS grades are specifically recommended for vapor phase soldering.GaldenÂ® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of servic..
Dielectric Strength	15.7 kV/mm	399 kV/in	2.54 mm gap
Solvay Specialty Polymers GaldenÂ® HT170 PFPE Heat Transfer Fluid GaldenÂ® HT grades are specifically recommended for use as heat transfer fluids.GaldenÂ® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of service..
Dielectric Strength	15.7 kV/mm	399 kV/in	2.54 mm gap
Solvay Specialty Polymers GaldenÂ® HT200 PFPE Heat Transfer Fluid GaldenÂ® HT grades are specifically recommended for use as heat transfer fluids.GaldenÂ® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of service..
Dielectric Strength	15.7 kV/mm	399 kV/in	2.54 mm gap
Solvay Specialty Polymers GaldenÂ® HT230 PFPE Heat Transfer Fluid GaldenÂ® HT grades are specifically recommended for use as heat transfer fluids.GaldenÂ® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of service..
Dielectric Strength	15.7 kV/mm	399 kV/in	2.54 mm gap
Solvay Specialty Polymers GaldenÂ® HT55 PFPE Heat Transfer Fluid GaldenÂ® HT grades are specifically recommended for use as heat transfer fluids.GaldenÂ® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of service..
Dielectric Strength	15.7 kV/mm	399 kV/in	2.54 mm gap
Solvay Specialty Polymers GaldenÂ® HT80 PFPE Heat Transfer Fluid GaldenÂ® HT grades are specifically recommended for use as heat transfer fluids.GaldenÂ® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of service..
Dielectric Strength	15.7 kV/mm	399 kV/in	2.54 mm gap
Solvay Specialty Polymers GaldenÂ® LLS215 PFPE VPS Fluid GaldenÂ® LS and HS grades are specifically recommended for vapor phase soldering.GaldenÂ® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of servic..
Dielectric Strength	15.7 kV/mm	399 kV/in	2.54 mm gap
Solvay Specialty Polymers GaldenÂ® LS200 PFPE VPS Fluid GaldenÂ® LS and HS grades are specifically recommended for vapor phase soldering.GaldenÂ® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of servic..
Dielectric Strength	15.7 kV/mm	399 kV/in	Short Time; ASTM D149
Sumitomo Bakelite DurezÂ® 118 Phenolic, Compression Grade Durez 118 Black Phenolic is a two-stage, asbestos free, general purpose molding material. It exhibits improved impact strength and resistance to flexural fatigue for demanding automotive, electrica..
Dielectric Strength	15.7 kV/mm	399 kV/in	ASTM D149
Styron CALIBREâ„¢ 2060-6 Polycarbonate CALIBREâ„¢ 2060-6 resin is designed for medical applications which use steam or ethylene oxide for sterilization. This material has excellent retention of physical properties and optical clarity..
Dielectric Strength	15.7 kV/mm	399 kV/in	ASTM D149
Styron CALIBREâ„¢ 2061-6 Polycarbonate CALIBREâ„¢ 2061-6 resin is used in applications involving steam or ethylene oxide for sterilization - though suitability for use in these applications is dependent upon autoclave cycle times and ..
Dielectric Strength	15.7 kV/mm	399 kV/in	Step by step; ASTM D149
Sumitomo Bakelite DurezÂ® 32633 Glass Filled Phenolic, Injection Grade Durez 32633 Black Phenolic is a two-stage, glass filled, special purpose molding compound. It is designed for applications requiring high physical strengths, dimensional stability, and heat resista..
Dielectric Strength	15.7 kV/mm	399 kV/in	Step by step; ASTM D149
Sumitomo Bakelite SumikonÂ® PM-9640 Glass Filled Phenolic Two stage glass fiber filled black phenolic. It is especially designed for applications requiring high strength and dimensional stability with excellent heat resistance. PM-9640 is widely used in ..
Dielectric Strength	15.7 kV/mm	399 kV/in	Short Time, 500V/sec; ASTM D149
Eastman Eastar EN052 Polyester Eastar Polyester EN052 is a thermoplastic condensation homopolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. It has been crystalliz..
Dielectric Strength	15.7 kV/mm	399 kV/in	Short Time, 500V/sec; ASTM D149
Eastman Eastar MN052 Polyester, Natural Eastar polyester MN052 is a thermoplastic condensation homopolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. It has been crystalliz..
Dielectric Strength	15.7 kV/mm	399 kV/in	ASTM D149
Plaslok 504 Black (INJ) Heat Resistant Mineral/Cellulose Filled Phenolic Molding Compound (discontinued **)&l Plaslok Corporation was purchased by Plastics Engineering Company (maker of Plenco brand materials) in March 2000. The Plaslok name is no longer in use.Plaslok 504 is a two-stage, mineral and cellu..
Dielectric Strength	15.7 kV/mm	399 kV/in	2.54 mm gap
Solvay Specialty Polymers Galden® HT110 PFPE Heat Transfer Fluid Galden® HT grades are specifically recommended for use as heat transfer fluids.Galden® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of service tem..