- HOME
- POLYMER SEARCH
- Nonferrous Metal
- Titanium Alloy
- Alpha/Near Alpha Titanium Alloy
- ATI Allvac® 3-2.5 Titanium Alloy, Heat Treatment: 704°C (1300°F) Anneal
ATI Allvac® 3-2.5 Titanium Alloy, Heat Treatment: 704°C (1300°F) Anneal
| Category | Metal , Nonferrous Metal , Titanium Alloy , Alpha/Near Alpha Titanium Alloy |
| Manufacturer | ATI Allvac |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | ATI Allvac® 3-2.5 Titanium Alloy, Heat Treatment: 704°C (1300°F) Anneal.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Data provided by Allvac.Applications: Excellent cold formability, 20-50% higher tensile properties than CP titanium grades. Primarily used in aircraft hydraulic systems.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 4.48 g/cc | 0.162 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Brinell | 256 | 256 | Estimated from Rockwell C value for Brinell test with 3000 kg load/10 mm diameter ball |
| Hardness, Knoop | 278 | 278 | Estimated from Rockwell C value. |
| Hardness, Rockwell C | 24 | 24 | |
| Hardness, Vickers | 269 | 269 | Estimated from Rockwell C value. |
| Tensile Strength, Ultimate | 690 MPa | 100000 psi | |
| Tensile Strength, Yield | 586 MPa @Strain 0.200 % |
85000 psi @Strain 0.200 % |
|
| Elongation at Break | 15 % | 15 % | |
| Reduction of Area | 25 % | 25 % |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Aluminum, Al | 3.0 % | 3.0 % | |
| Carbon, C | <= 0.050 % | <= 0.050 % | |
| Hydrogen, H | <= 0.015 % | <= 0.015 % | |
| Iron, Fe | 0.13 % | 0.13 % | |
| Nitrogen, N | 0.010 % | 0.010 % | |
| Oxygen, O | 0.10 % | 0.10 % | |
| Titanium, Ti | 94 % | 94 % | as balance |
| Vanadium, V | 2.5 % | 2.5 % |
Users viewing this material also viewed the following:
- Plastcom SLOVAMID 6 FRB 4 Polyamide 6, Halogen Free Flame Retardant
- Ravago Manufacturing Americas Hylon® N1040MHL Nylon 6/6 (DAM)
- SABIC PS 330 High Impact Polystyrene for Sheet Extrusion
- MarkeTech W80Cu Tungsten/Copper Heat Sink Material
- Ineos K44-08-122 HDPE
- Multibase Multi-Flex® A 8502 TPE Thermoplastic Elastomer
- Wanhua Chemical Wanthane® WHT-1490IV Polyester Based TPU
- ExxonMobil Spartan EP 68
- Axiall 10850 Wire & Cable Flexible PVC
- Arkema Group Lacovyl® PB 1303 PVC
Copyright © lookpolymers.com All Rights Reserved